Michael Kors Access Hybrid Gage MKT4000 Handleiding

Michael Kors Horloge Access Hybrid Gage MKT4000

Lees hieronder de đź“– handleiding in het Nederlandse voor Michael Kors Access Hybrid Gage MKT4000 (9 pagina's) in de categorie Horloge. Deze handleiding was nuttig voor 75 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/9
- 2 -
ANALOG INSTRUCTIONS
Time Setting
1. Pull the crown out to position 2.
2. Turn the crown to set the hour and minute hands to the desired time.
3. Return the crown to position 1.
1 2
DATE MODELS
Date Setting
1. Pull the crown out to position 2.
2. Turn the crown either clockwise or counter-clockwise and set the date for the previous day. The direction
that moves the date varies on different watch models.
Time Setting
1. Pull crown out to position 3.
2. Turn counter-clockwise to advance the time and continue until the day changes to the present day.
3. Set to the correct time.
4. Push crown back to position 1.
123
DATE
OPEN HEART TY605
Time Setting
1. Pull crown out to position 2.
2. Turn crown clockwise to rotate hour and minute hands to desired time.
3. Push crown back to position 1.
1 2
OPEN HEART
CLOSED
AUTOMATIC WINDING MOvEMENTS
A timepiece with an automatic winding movement obtains the power to wind itself by the movement of your wrist, there is no battery. Therefore, not wearing the
timepiece for several consecutive days could exhaust the power reserve. If your watch stops, it is recommended that you manually wind the movement by rotating the
crown clockwise to achieve the necessary power reserve.
It is important that your timepiece is adjusted to match the size of your wrist. A loose fit may result in a loss in capacity of the timepiece to wind itself. When fully wound,
your timepiece has a power reserve of approximately 38 hours.
AUTOMATIC 2505
1. To start time-keeping, rotate the crown clockwise 15-20 times in position 1 until power reserve hand moves
from “-” low reserve to “+” full reserve. Pull crown out to position 2 and rotate clockwise to set time. Push
crown back to position 1.
2. Press A to set date. Each press of pusher A will advance the date by one increment. Hand in upper left
indicates date and will automatically reset to “1” at the end of a 31-day month.
NOTE: Do not set date and week between 10 p.m. and 2 a.m. (22 o’clock and 2 o’clock). Doing so could
damage the movement’s accuracy.
1 2
A
DATE POWER RESERVE
English
AUTOMATIC 2525
1. To start time-keeping, rotate the crown clockwise 15-20 times in position 1.
2. Pull crown out to position 2 and rotate clockwise to set time. Push crown back to position 1.
3. Press A to set month.
4. Press B to set date.
5. Press C to set weekday.
NOTE: Each press of the pushers will advance the values by one increment.
NOTE: Do not set date and week between 10 p.m. and 2 a.m. (22 o’clock and 2 o’clock). Doing so could
damage the movement’s accuracy.
A
B
C
1 2
DATE
MONTH
WEEKDAY
- 3 -
MULTIfUNCTION vX3J
Date Setting
1. Pull crown out to position 2.
2. Turn clockwise to advance the date hand.
3. Push crown back to position 1.
Day and Time Setting
1. Pull crown out to position 3.
2. Turn clockwise to advance hour and minute hands.
The hand showing days of the week will also move with the hour and minute hands. Keep turning until you
have reached the desired day.
24-Hour Sub-Dial Setting
The movement of the 24-hour hand corresponds to the hour and minute hands. When setting the time be sure to
check that the 24-hour hand is set properly.
1 2 3
DATE
24-HOUR
DAY
CHRONOGRAPH vD51B
Time/Date Setting
1. Before setting the time, make sure the chronograph second and minute hands are at the 12:00 position and
the chronograph is not running. See Chronograph Operation instructions below.
2. Pull crown out to position 2.
3. Rotate crown clockwise until the previous day’s date is displayed in date window.
4. Pull crown out to position 3 when the second hand is in the 12:00 position. Second hand will stop.
5. Rotate crown clockwise to set time.
6. Return crown to position 1.
NOTE: Make sure that AM/PM is set correctly. Do not set date between 9:00 p.m. and 1:00 a.m. or day may
not change properly.
Chronograph Operation
1. Press A to start/stop the chronograph.
2. Press B to reset.
Split Time
1. Press B while the chronograph is running.
2. Press B again to return to the chronograph.
3. Press A to finalize timing.
4. Press B to reset.
Chronograph Zero Reset
1. Pull crown out to position 3.
2. Press A to reset the chronograph second hand to 12:00 (zero) position. Each press advances the
chronograph second hand one mark. If A is held down for over 2 seconds, the chronograph second hand
advances continuously.
NOTE: Chronograph minute hand moves simultaneously with chronograph second hand.
3. Press B to reset the chronograph minute hand. Repeat step 2 instructions.
4. Return crown to position 1 when chronograph hands are reset to zero.
CHRONO
SECOND HAND
CHRONO
MINUTE HAND
1 2 3
A
B
DATE
CHRONOGRAPH ISA 8172/220
Time/Day Setting
1. Pull crown out to position 3.
2. Rotate crown to set time.
3. To adjust day, continue rotating crown 24 hours until day is correct.
4. Return crown to position 1.
Date Setting
1. Pull crown out to position 2.
2. Rotate crown clockwise until the correct date is shown in the date window.
3. Return crown to position 1.
Chronograph Operation
1. Press A to start/stop the chronograph.
2. Press B to reset.
NOTE: After 2 hours of continuous running, the chronograph will automatically stop and reset to save
the battery.
Split Time
1. Press B while the chronograph is running.
2. Press B again to return to the chronograph.
3. Press A to finalize timing.
4. Press B to reset.
1 2 3
A
B
1 2 3
A
B
DAY
SECOND HAND
CHRONO MINUTE HAND
CHRONO 1/5
SECOND HAND
DATE
- 4 -
CHRONOGRAPH OS10 (without date: OS30)
Time Setting
1. Pull crown out to position 3.
2. Turn crown to set the desired time.
3. Return crown to position 1.
Date Setting
1. Pull crown out to position 2.
2. Turn crown clockwise until the correct date is shown in the date window.
3. Return crown to position 1.
Chronograph Operation
1. Press A to start/stop the chronograph.
2. Press B for reset.
Adjusting The Chronograph
1. Pull crown to position 3.
2. Press A to reset the second hand to “0.”
3. Press B to reset the chronograph minute and hour hands.
4. Reset the watch to the current time and return crown to position 1.
A
B
123
MINUTE HAND
HOUR HAND
SECOND HAND
DATE
CHRONOGRAPH OS20 / OS21
Time Setting
1. Pull crown out to position 3. Chronograph second hand will return to “0.”
Do not return the crown to position 1 while the hands are returning to “0,” or else the position the
hands are at when this is done will be recognized as the new “0” position.
2. Turn crown to set the desired time.
3. Return the crown to position 1.
Date Setting
1. Pull crown out to position 2.
2. Turn crown counter-clockwise until the correct date is shown in the date window.
3. Return crown to position 1.
Chronograph Zero Reset
This procedure should be performed when the chronograph second hand does not return to the “0”
position after the chronograph has been reset.
1. Pull crown out to position 3.
2. Press A to set the chronograph second hand to the “0” position.
NOTE: The hands move quickly if the pushers are kept pressed.
3. Once the hand has been zeroed, reset the time and return the crown to position 1.
Do not return the crown to position 1 while the hands are returning to “0.” Doing so will cause the
position of the hands to be recognized as the new “0” position.
Chronograph Operation
This chronograph is able to measure and display time in 1/1 second up to maximum of 1 hour.
1. Press A to start/stop the chronograph.
2. Press B to reset the chronograph.
123
A
B
123
A
B
CHRONOGRAPH
MINUTE HAND
CHRONOGRAPH
MINUTE HAND
24-HOUR HAND
24-HOUR HAND
CHRONOGRAPH
SECOND HAND
CHRONOGRAPH
SECOND HAND
SECOND HAND
DATE
DATE
OS20
OS21
CHRONOGRAPH STOPWATCH JS25, vD53
Setting the Time
1. Pull the crown out to position 3.
2. Turn the crown to set hour and minute hands.
3. After the time has been set, push the crown back to position 1.
Setting the Date
1. Pull the crown out to position 2.
2. Turn the crown clockwise to set the date.
• If the date is set between the hours of around 9:00 PM and 1:00 AM, the date may not change on the
following day.
3. After the date has been set, push the crown back to position 1.
Using the Chronograph
1. Press A to start/stop the chronograph.
2. Press B to reset the chronograph to zero.
Chronograph Reset (including after replacing the battery)
This procedure should be performed when the stopwatch second or minute hand does not return to the
zero position.
1. Pull the crown out to position 3.
2. Press A to set the chronograph second hand forward. Press B to set the chronograph second hand
backward.
• The chronograph minute hand is synchronized with the chronograph second hand.
• The chronograph second hand can be advanced rapidly by continuously pressing A or B.
3. Once both hands have been set to zero, reset the time and return the crown to position 1.
123
A
B
CHRONOGRAPH
SECOND HAND
CHRONOGRAPH
MINUTE HAND 24-HOUR HAND
DATE


Product specificaties

Merk: Michael Kors
Categorie: Horloge
Model: Access Hybrid Gage MKT4000

Heb je hulp nodig?

Als je hulp nodig hebt met Michael Kors Access Hybrid Gage MKT4000 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Horloge Michael Kors

Handleiding Horloge

Nieuwste handleidingen voor Horloge