Megger MIT410/2 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Megger MIT410/2 (43 pagina's) in de categorie Meetapparatuur. Deze handleiding was nuttig voor 141 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/43
MIT400/2 Series
Insulation and continuity testers
User guide
www.megger.comMIT400/2 2
1. Introduction 3
2. G Safety Warnings 4
3. Symbols used on the instrument 5
4. General description 6
Unpacking the carton 6
Carton contents (all instruments) 6
5. Preparations for use (all instruments) 7
Batteries 7
Preliminary test lead check
6. General operating intsructions 8
General functions 8
LCD Display 9
Backlight operation 10
7. Test lead connections 11
Standard test leads 11
SP5 Switched probe (not MIT400/2, MIT480/2
and MIT40X) 11
8. AC/DC voltage and frequency
measurements 11
9. Insulation resistance testing - general 13
Standard insulation resistance testing 13
Insulation resistance testing –
timed modes ‘t’, PI and DAR 14
10. MIT40X testing 17
11. Continuity testing [Ω] and buzzer [ ] 18
12. Resistance measurements (kΩ Range) 19
13. Capacitance measurements 20
Capacitance measurement procedure 20
Distance measurement by capacitance 20
14. Setup options 20
15. Saving, recalling and downloading
test results. 23
Saving test results 23
Test results recall 23
PI and DAR recall. 24
16. Deleting test results 26
Procedure for deleting a single test result
(refer to Figure 16) 26
Procedure for deleting all test results
(refer to Figure 19) 27
Preparing your MIT430/2 or MIT485/2 for
“Bluetooth®” Communications 29
Preparing your MIT430/2 or MIT485/2
to your PC 29
Standard download operation 32
17. Battery and fuse replacement 32
Battery condition and replacement 32
Blown fuse indicator 33
18. Preventive maintenance 33
19. Specification 34
20. Basic and service errors 36
Basic error 36
Service error: 36
21. Accessories 37
22. Repair and Warranty 39
User guide contents
www.megger.comMIT400/2 3
1. Introduction
Thank you for purchasing the Megger insulation test instrument.
For your own safety and to get the maximum benefit from your instrument, please ensure that you read and understand the following
safety warnings and instructions before attempting to use the instruments.
This user guide describes the operation and functions of the MIT400/2 series of insulation and continuity test instruments.
These instruments are designed and manufactured by:
Megger Ltd
Archcliffe Road
Dover Kent CT17 9EN
England
Megger Limited reserves the right to change the specification of these instruments at any time without prior notice.


Product specificaties

Merk: Megger
Categorie: Meetapparatuur
Model: MIT410/2

Heb je hulp nodig?

Als je hulp nodig hebt met Megger MIT410/2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Meetapparatuur Megger

Handleiding Meetapparatuur

Nieuwste handleidingen voor Meetapparatuur