Maxell MPC-B2800 Handleiding

Maxell powerbank MPC-B2800

Lees hieronder de 📖 handleiding in het Nederlandse voor Maxell MPC-B2800 (4 pagina's) in de categorie powerbank. Deze handleiding was nuttig voor 13 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

MPC-B2800 User manual

Maxell Rechargeable Power Bank

MPC-B2800

Accessories:

Charger unit x 1

Charging cable (~30cm) x 1

Instruction booklet with warranty sheet x 1

-This instruction manual is not allowed to be copied partially or wholly.

Unauthorized reproduction is also prohibited.

-Should there be product improvements, the product appearance or

speciﬁcations may change without prior notice.

Disclaimers:

-Maxell is not liable for the injuries due to fire accidents, earthquake, third party’

activities.

- Maxell is not liable for other defects due to improper misuse of the product

caused by the user.

- Maxell is not liable for any injury caused when using this product or during the

connection between device to device.

- This product is designed only for Normal Consumer Use and should NOT be

used for Industrial Purposes. If the product is used in this way, Maxell is NOT

liable for human injury or ﬁre accident.

Caution!

Please follow the caution below when using our product.

Danger:

Do not connect input and output conversely.

Do not take power from sources other than from the USB port.

Do not disassemble or modify the product

Do not immerse in water

Do not make short circuit to the ports

Do not leave the product in places of high temperature or under direct sunlight.

Do not throw into ﬁre

Do not touch the product if you see any liquid leaking around

Operation Procedures:

1) Check the remaining battery level:

Remaining battery level can be checked by pressing the battery level checking

button The ttery level LED will light up. There is no battery remaining if the . ba

LED light does not show. Please charge the product.

2) Charging (Please use this product after a full charge ):

- nnect the input port of enclosed recharge cable to the output port of ACo C

adaptor with USB output or PC USB port. Charging LED will turn red.

-Charging time: ~4 hours (Charged by 5V1A output AC adaptor)

-Charging LED will turn green when charging is complete. Please disconnect

the cable after charging.

Attention!

Please conﬁrm the port direction before connection. Incorrect connection may

damage the product. Please end charging if your device cannot be fully

charged after certain period of time. Don t charge this product when it is ’

connecting to other device. This might lead to heat generation or damage to

the product. The power from USB port of PC might not be sufﬁcient for

charging. Charge the product every 3 months even it is not often in use. if

Otherwise, the product might be fully discharged and might not be able to

charge again.

3) Charging smartphone (It is necessary to use the enclosed USB charging

cable)

-Connect the output port of attached charging cable to the smartphone and

start charging. (For charging iPod, iPhone series, please use original Apple

charging cable)

-Please check the battery level shown on smartphone (or connected device)

when it is charging. Please disconnect the cable if charging is ﬁnished or if you

want to stop charging,

Attention!

Rating output for this product is DC5V/1A. Depending diﬀerent devices to on

be connected, this product might not have suﬃcient output and may not be

able to fully charge the devices. When data is transferring between PC and

device, this product might not be able to charge the devices. Depending on the

devices in use, the devices might not be fully charged. When the device is at

zero battery level or depending on the device in use, boosting time might be

longer or the device might not be able to be charged. Please check before

charging. Maxell warranty does not cover any accidental loss of your data.

Maintenance:

Use cloth with neutral cleansing agent or water to remove the dirt from the

product body and use a soft dry cloth to clean it. Don t use the gasoline, thinner ’

or alcohol etc.

Troubles Shooting:

Please contact the Customer Service department if below troubles cannot be

solved.

Trouble Shooting

Reasons

Countermeasures

Charging LED does

not come on when

this product is

charging. Or, it takes

longer than the

speciﬁed charging

time

PC is standby mode. in

Change PC from stand by

mode.

USB port does not have

suﬃcient power

Disconnect other device

from the output port.

This product is charging

when connecting to the

device

Disconnect the device.

Charge the device

separately.

Circumstance

temperature is over the

operation temperature

range.

Product is kept in no

use for long period and

battery is fully

discharged.

The product is unable to be

used.

Please charge the product

every 3 months.

Battery is hot

Product will be warm in

use, in charging and

just after charging.

Please use it after a while.

Remaining battery

level LED does not

light up.

There is no remaining

battery.

Please charge the product.

Device cannot be

charged

Cables and ports

connection are in

correct.

Please double check the

shape of input port of the

devices.

Product specificaties

Merk:	Maxell
Categorie:	powerbank
Model:	MPC-B2800
Kleur van het product:	Roze
Capaciteit van de accu/batterij:	2800 mAh
Snel opladen:	Nee
Waterdicht:	Nee
Oplaadbron:	USB
Output current:	1 A
Lader compatibiliteit:	Universeel
Aantal gelijktijdig verbonden apparaten (max):	1
Batterijtechnologie:	Lithium-Ion (Li-Ion)
Aantal laadcycli:	500
USB Type-A-uitvoerpoorten:	1