Martin Flat Panel Handleiding

Martin Speaker Flat Panel

Lees hieronder de 📖 handleiding in het Nederlandse voor Martin Flat Panel (8 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 153 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
Flat Panel
user manual
m a r t i n a r c h i t e c t u r a l
Measurements are in millimeters
500
26
500
© 2004 Martin Professional A/S, Denmark.
All rights reserved. No part of this manual may be reproduced, in any form or by any means,
without permission in writing from Martin Professional A/S, Denmark.
NXT is a trade mark of New Transducers Limited
Printed in Denmark.
P/N 35020013, Rev A
3
Introduction
Thank you for selecting the Flat Panel. The Flat Panel is a square flat panel
speaker designed for indoor venues where professional high quality in-fill
sound is required.
Flat Panel offers a "disguised" solution to delivering sound, useful in
applications where elegant atmospheric audio is needed. The Flat Panel
uses unique flat panel loudspeaker technology that has been designed with
very light, extremely thin materials. The panels therefore offer a uniform
dispersion, which blends in extremely well with the sounds of the
surrounding environment.
Four exciters mounted on carefully calculated positions on the back of the
panel vibrate the panel and generate the sound which, compared to
conventional loudspeakers, provide a linear decrease in sound pressure,
which results in a very uniform sound pressure throughout the venue.
Flat Panels can be supported either by the ViroSub sub-woofer or by the
bass output from a main PA in the installation.
Features
• Wall mountable, plus many other mounting options with the broad range of
Viro mounting accessories
• Light reflecting capability
• Sturdy mechanical cabinet
• Based on NXT* technology
• Patented board material laminate
Safety information
Read this manual before powering or installing the Flat Panel, follow the
safety precautions listed below and observe all warnings in this manual and
on the Flat Panel. If you have questions about how to operate the Flat Panel
safely, please contact your Martin dealer or call the Martin Professional 24-
hour service hotline at +45 70 200 201.
• Do not install the Flat Panel outdoors.
• Do not open the Flat Panel. There are no user-serviceable parts inside.
• When installing the Flat Panel above ground level, verify that the structure
can hold at least 10 times the weight of all installed devices.
• Block access below the work area whenever installing or removing the Flat
Panel.
• Do not modify the Flat Panel or install other than genuine Martin parts.
• Refer all service to a Martin service technician.


Product specificaties

Merk: Martin
Categorie: Speaker
Model: Flat Panel

Heb je hulp nodig?

Als je hulp nodig hebt met Martin Flat Panel stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Speaker Martin

Handleiding Speaker

Nieuwste handleidingen voor Speaker