Marshall Electronics CV420-30X-NDI Handleiding

Marshall Electronics Video conferentie systeem CV420-30X-NDI

Lees hieronder de 📖 handleiding in het Nederlandse voor Marshall Electronics CV420-30X-NDI (16 pagina's) in de categorie Video conferentie systeem. Deze handleiding was nuttig voor 55 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/16

B r o a d c a s t A / V D i v i s i o n

CV420-30X-NDI

30X NDI®|HX Camera

User Manual

Table of Contents

1. Package Contents

2. Function Introduction

2.1 I/O Functions Introduction

2.2 Tally Indicator Light Function Description

3. Installation Instructions

3.1 Installation Basics

3.2 Connecting Devices

4. Network Function Settings

4.1 Web System Requirements

4.2 Connecting Camera to Network

4.3 Web Page Function Description

5. Speciﬁcations

6. Troubleshooting

Warranty

Safety Instructions

NDI Instruction

Understanding Quick setup of CV420-30X-NDI with NDI®|HX

This section explains how to quickly conﬁgure the Marshall CV420-30X-NDI camera with NDI®|HX.

It also explains how to update the device, and where you can ﬁnd additional NDI software to extend your

workﬂow. Complete NDI® Tools can be found here: https://www.ndi.tv/tools/

Here you will choose whether you will require NDI® Tools for Windows or Mac and download.

After completing this short section, you will be all set to begin using your new NDI®|HX camera.

OVERVIEW: Unlike typical cameras, CV420-30X-NDI leverages the easy plug-n-play beneﬁts of the NDI-based

IP workﬂow supported by leading video software and hardware developers around the globe.

GETTING READY: Your new CV420-30X-NDI uses the NDI®|HX protocol for audio/video transmission, and

more. Your ﬁrst step will be to install NDI|HX drivers if using a TriCaster, or Microsoft HEVC decode on non-

TriCaster systems, as appropriate for your computer platform or device.

1. Navigate to ndi.tv/formats in your web browser and follow the relevant directions to download and install

the drivers for your computer platform. NOTE: The NDI|HX driver also installs NewTek’s NDI Studio

Monitor application, which will not only display the output of your camera but also provide easy access

to its settings. Also contains built-in PTZ controls.

2. NDI Studio Monitor and other useful NDI tools can be found here: https://www.ndi.tv/tools/

3. Then simply plug the Ethernet (NDI) port to same Network your computer or Newtek equipment are

plugged into and off you go.

NOTE: The End User License Agreement under which you use the NDI|HX driver speciﬁes that “you may use

up to ﬁve (5), and no more than ﬁve, copies on separate machines at one time.”

OPTIONAL – for Microsoft Windows® users, downloading and installing the NewTek NDI® Tools pack,

available at no cost from ndi.tv/tools/, the download pack will provide learning tools and utilities to maximize

your NDI®|HX experience.

FINAL NOTE – if you are experiencing any problems with the NDI® platform, NDI® software, NDI® drivers

please contact Newtek for technical assistance or join the NDI community to review HOW-TO videos, social

media, forums, blogs: www.ndi.tv/community

If you are having a hardware problem, and need assistance please contact Marshall Electronics.

Marshall Customer Support

Toll Free: 800-800-6608 or 310-333-0606

Email: support@marshall-usa.com

Product specificaties

Merk:	Marshall Electronics
Categorie:	Video conferentie systeem
Model:	CV420-30X-NDI
Kleur van het product:	Zwart
Ondersteunde video-modi:	720p, 1080p, 3840p
Field of view (FOV) hoek:	68 °
Zoomcapaciteit:	Ja
Maximale beeldsnelheid:	60 fps
Aantal HDMI-poorten:	1
Microfoon, line-in ingang:	Ja
Omvang optische sensor:	1/2.5 "
Megapixels:	8 MP
Cameratype:	Enkele camera
Optische zoom:	30 x
Maximale videoresolutie:	3840 x 2160 Pixels
HD type:	4K Ultra HD
RS-232 port:	1
Ondersteunde grafische resoluties:	1280 x 720 (HD 720), 1920 x 1080 (HD 1080), 3860 x 2160
Hoofdtelefoon uit:	Ja
Hoeveelheid Power over Ethernet (PoE) ports:	1