Manhattan 207362 Handleiding

Manhattan Niet gecategoriseerd 207362

Lees hieronder de 📖 handleiding in het Nederlandse voor Manhattan 207362 (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 15 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

HUM DEBUGGER

Hum Eliminator

Congratulations on your purchase of the Electro-Harmonix Hum Debugger, Hum

Eliminator pedal. No matter what type of pickups you use or how loud you play, the

E-H Hum Debugger will clean up your signal chain so that hum will no longer

overtake your guitar signal. Simply connect the Hum Debugger to your guitar like

you would any other effects pedal and you are ready to eliminate hum from your

sound forever!

-CONTROLS and I/O JACKS-

NORMAL/STRONG TOGGLE SWITCH Sets the amount of Hum Elimination. In –

NORMAL mode the Hum Debugger removes only the odd harmonics from the hum

present in your signal. In STRONG mode the Hum Debugger removes both odd and

even harmonics from your signal’s hum content.

STATUS LED – When the LED is lit the Hum Debugger is active. When the LED is off

the Hum Debugger is in True Bypass mode.

FOOTSWITCH – Toggles the Hum Debugger between active and True Bypass

modes.

CONNECTIONS Connect your instrument to the INPUT Jack. Connect your –

amplifier or the rest of your effects chain to the AMP Jack.

POWER Plug the barrel connector from the AC Adapter that came with your Hum –

Debugger into the power jack at the top of the Hum Debugger. Plug the AC Adapter

into a solid wall outlet. You must use the AC Adapter that the Hum Debugger came

with and the AC Adapter must have an output of 7.5VAC with the ability to supply at

least 200mA of current.

WARNING: Use only the 7.5VAC/400mA AC adapter the

Hum Debugger comes supplied with. Do not use any other

AC adapters. Using other AC adapters, even those made by

Electro-Harmonix, could cause harm to the unit, the

adapter or your drummer. The Hum Debugger does not

use batteries.

-USING THE HUM DEBUGGER-

The Electro-Harmonix Hum Debugger requires no special tricks necessary when to

remove hum. You can use it like you would any other effects pedal. The only thing to

remember is you must use the AC Adapter that the Hum Debugger comes supplied

with.

When using the Hum Debugger first set the toggle switch to NORMAL mode.

NORMAL mode should work well in most situations. If you find that the Hum

Debugger is still letting some hum through then move the switch up to STRONG

mode, this should remove the rest of the hum.

If you use more effects pedals than just the Hum Debugger we advise that the Hum

Debugger be inserted at the beginning of the effects chain.

- WARRANTY INFORMATION -

Please register online at http://www.ehx.com/product-registration or complete and

return the enclosed warranty card within 10 days of purchase. Electro-Harmonix will

repair or replace, at its discretion, a product that fails to operate due to defects in

materials or workmanship for a period of one year from date of purchase. This

applies only to original purchasers who have bought their product from an authorized

Electro-Harmonix retailer. Repaired or replaced units will then be warranted for the

unexpired portion of the original warranty term.

If you should need to return your unit for service within the warranty period, please

contact the appropriate office listed below. Customers outside the regions listed

below, please contact EHX Customer Service for information on warranty repairs at

info@ehx.com or +1- - -8300. USA and Canadian customers: please obtain a 718 937

Return Authorization Number (RA#) from EHX Customer Service before returning

your product. Include with your returned unit: a written description of the problem

as well as your name, address, telephone number, e-mail address, and RA#; and a

copy of your receipt clearly showing the purchase date.

United States & Canada

EHX CUSTOMER SERVICE

ELECTRO-HARMONIX

c/o NEW SENSOR CORP.

47-50 33RD STREET

LONG ISLAND CITY, NY 11101

Tel: 718- - 937 8300

Email: info@ehx.com

Europe

JOHN WILLIAMS

ELECTRO-HARMONIX UK

13 CWMDONKIN TERRACE

SWANSEA SA2 0 RQ

UNITED KINGDOM

Tel: +44 179 247 3258

Email: electroharmonixuk@virginmedia.com

This warranty gives a purchaser specific legal rights. A purchaser may have even

greater rights depending upon the laws of the jurisdiction within which the product

was purchased.

To hear demos on all EHX pedals visit us on the web at www.ehx.com

Email us at info@ehx.com

Product specificaties

Merk:	Manhattan
Categorie:	Niet gecategoriseerd
Model:	207362
Kleur van het product:	Wit
Gewicht:	100 g
Breedte:	75 mm
Diepte:	40 mm
Hoogte:	18 mm
Snoerlengte:	0.25 m
Materiaal behuizing:	Acrylonitrielbutadieenstyreen (ABS)
Type verpakking:	Blister
Ondersteunde video-modi:	480p, 720p, 1080i, 1080p
Maximum resolutie:	3840 x 2160 Pixels
Certificering:	UL 20276, FCC, CE
Aantal per verpakking:	1 stuk(s)
Kleurdiepte:	10 Bit
Temperatuur bij opslag:	-20 - 60 °C
Relatieve luchtvochtigheid:	0 - 80 procent
Compatibele besturingssystemen:	Windows XP/Vista/7/8.1/10, Linux\nMac 9.x/10.x
Snelle installatiehandleiding:	Ja
DisplayPort versie:	1.2
Contact geleider materiaal:	Nikkel
Overdrachtssnelheid:	3 Gbit/s
Bedrijfstemperatuur (T-T):	0 - 40 °C
Relatieve vochtigheid in bedrijf (V-V):	0 - 80 procent
Code geharmoniseerd systeem (HS):	84733080
Geslacht connector:	Mannelijk/Vrouwelijk
Aansluiting 1:	Mini DisplayPort
Aansluiting 2:	DVI-I + VGA (D-Sub) + HDMI
Connector 1 vormfactor:	Recht
Connector 2 vormfactor:	Recht
Aansluiting 1 type:	Mannelijk
Aansluiting 2 type:	Vrouwelijk
Type converter:	Actieve video-omzetter
Kabelhulsmateriaal:	Polyvinyl chloride (PVC)
Bandwidth:	3000 MB/s