Makita VC1310L Handleiding

Makita Stofzuiger VC1310L

Lees hieronder de 📖 handleiding in het Nederlandse voor Makita VC1310L (16 pagina's) in de categorie Stofzuiger. Deze handleiding was nuttig voor 61 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/16
1
ENGLISH (Original instructions)
INSTRUCTION MANUAL
IMPORTANT: Read Before Using.
V
acuum Cleaner
VC1310L
VC2510L
VC3210L
011586
2
ENGLISH (Original instructions)
SPECIFICATIONS
Model VC1310L / VC2510L / VC3210L
Countries EU AU/NZ GB
110V
GB
230V CL AR / CH
Voltage Volt 230 - 240 230 - 240 110 230 - 240 220 230 - 240
Power consumption Watt 1050 1050 1050 1050 1050 1050
Watt at symbol
mode 2400 1200 600 1900 2200 1100
Connected load for
appliance socket Watt at symbol
mode 2600 1400 850 2100 2500 1400
Total connected load Watt 3450 2250 1650 2950 3250 2150
Model VC1310L VC2510L VC3210L
Volume flow (air) 2.0 m3/min
Vacuum 22 kPa
Protection class 1
Type of protection IP X4 (splash-proof)
Dust 13 L 25 L 32 L
Recoverable capacity Water 7 L 14 L 27 L
Dimensions (L x W x H)
366 mm x 334 mm x 420 mm 432 mm x 416 mm x 451 mm 552 mm x 398 mm x 685 mm
Net weight 9.6 kg 10.5 kg 14.5 kg
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
END108-5
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
ï½¥ Read instruction manual.
ï½¥ Warning! The cleaner may contain
hazardous dust.
ï½¥ Never stand on the cleaner.
ï½¥
Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of the European Directive,
on Waste Electric and Electronic
Equipment and its implementation in
accordance with national law, electric
equipment that have reached the end of
their life must be collected separately
and returned to an environmentally
compatible recycling facility.
ENE016-1
Intended use
The tool is intended for collecting both wet and dry dust.
ENF001-1
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. This tool
should be grounded while in use to protect the operator
from electric shock. Use only three-wire extension cords
which have three-prong grounding-type plugs and
three-pole receptacles which accept the tool's plug.
ENG905-1
Noise
The typical A-weighted noise level determined according
to EN/IEC60704:
Model VC1310L
Sound pressure level (L
pA) : 72 dB (A)
Uncertainty (K) : 2.5 dB (A)
The noise level under working may exceed 80 dB (A).
Model VC2510L, VC3210L
Sound pressure level (L
pA) : 73 dB (A)
Uncertainty (K) : 2.5 dB (A)
The noise level under working may exceed 80 dB (A).
Wear ear protection
3
ENH038-3
For European countries only
EC Declaration of Conformity
Makita declares that the following Machine(s):
Designation of Machine:
Vacuum Cleaner
Model No./ Type: VC1310L, VC2510L, VC3210L
Conforms to the following European Directives:
2006/42/EC
They are manufactured in accordance with the following
standard or standardized documents:
EN60335
The technical file in accordance with 2006/42/EC is
available from:
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
31.7.2014
000331
Yasushi Fukaya
Director
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
ENB119-5
VACUUM CLEANER SAFETY
WARNINGS
WARNING! IMPORTANT READ CAREFULLY all
safety warnings and all instructions BEFORE USE.
Failure to follow the warnings and instructions may result
in electric shock, fire and/or serious injury.
1. Before use, make sure that this cleaner must
be used by people who have been adequately
instructed on the use of this cleaner.
2. Only use the socket outlet on the cleaner for
purposes specified in the instructions.
3.
If foam/liquid comes out, switch off immediately.
4. Clean the water level limiting device regularly
and examine it for signs of damage.
5. Do not use the cleaner without the filter.
Replace a damaged filter immediately.
6. USE OF EXTENSION CORD. When using an
extension cord because of the great distance
to your power source, try to employ a cord that
is sufficiently thick but not too long, or cleaner
performance will be adversely affected. For
outdoor applications use an extension cord
suitable for outdoor use.
7.
VOLTAGE WARNING: Before connecting the
cleaner to a power source (receptacle, outlet, etc.)
be sure the voltage supplied is the same as that
specified on the nameplate of the cleaner. A power
source with voltage greater than that specified for
the cleaner can result in SERIOUS INJURY to the
operator as well as damage to the cleaner. If in
doubt, DO NOT PLUG IN THE CLEANER. Using a
power source with voltage less than the
nameplate rating is harmful to the motor.
8. AVOID UNINTENTIONAL STARTING. Be sure
switch is OFF when plugging in.
9. Do not attempt to pick up flammable materials,
fire works, lighted cigarettes, hot ashes, hot
metal chips, sharp materials such as razors,
needles, broken glass or the like.
10.
NEVER USE THE CLEANER IN THE VICINITY OF
GASOLINE, GAS, PAINT, ADHESIVES OR
OTHER HIGHLY EXPLOSIVE SUBSTANCES. The
switch emits sparks when turned ON and OFF.
And so does the motor commutator during
operation. A dangerous explosion may result.
11.
Never vacuum up toxic, carcinogenic,
combustible or other hazardous materials such as
asbestos, arsenic, barium, beryllium, lead,
pesticides, or other health endangering materials.
12. Never use the cleaner outdoors in the rain.
13.
Do not use close to heat sources (stoves, etc.).
14.
GUARD AGAINST ELECTRIC SHOCK. Prevent body
contact with grounded surfaces. For example; pipes,
radiators, ranges, refrigerator enclosures.
15. Do not block cooling vents. These vents
permit cooling of the motor. Blockage should
be carefully avoided otherwise the motor will
burn out from lack of ventilation.
16. Keep proper footing and balance at all times.
17. DO NOT ABUSE CORD. Never carry the
cleaner by cord or yank it to disconnect from
receptacle. Keep cord away from heat, oil, and
sharp edges. Inspect cleaner cords
periodically and if damaged, have repaired by
authorized service facility. Inspect extension
cords periodically and replace if damaged.
18. Do not fold, tug or step on the hose.
19. Stop the cleaner immediately if you notice
poor performance or anything abnormal
during operation.
20.
DISCONNECT THE CLEANER. When not in use,
before servicing, and when changing accessories.
21.
Clean and service the cleaner immediately after
each use to keep it in tiptop operating condition.
22.
MAINTAIN THE CLEANER WITH CARE. Keep the
cleaner clean for better and safer performance.
Follow instructions for changing accessories. Keep
handles dry, clean, and free from oil and grease.
23.
CHECK DAMAGED PARTS. Before further use of
the cleaner, a guard or other part that is damaged
should be carefully checked to determine that it
will operate properly and perform its intended


Product specificaties

Merk: Makita
Categorie: Stofzuiger
Model: VC1310L

Heb je hulp nodig?

Als je hulp nodig hebt met Makita VC1310L stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Stofzuiger Makita

Makita

Makita DCL281F Handleiding

21 Februari 2024
Makita

Makita DCL283F Handleiding

21 Februari 2024
Makita

Makita CL114FD Handleiding

21 Februari 2024
Makita

Makita DCL284F Handleiding

21 Februari 2024
Makita

Makita LC08 Handleiding

30 Augustus 2023
Makita

Makita ADCV11 Handleiding

30 Augustus 2023
Makita

Makita XCV04 Handleiding

30 Augustus 2023
Makita

Makita GCV06 Handleiding

30 Augustus 2023
Makita

Makita LC09 Handleiding

30 Augustus 2023
Makita

Makita GCV04 Handleiding

30 Augustus 2023

Handleiding Stofzuiger

Nieuwste handleidingen voor Stofzuiger