Makita UR006G Handleiding

Makita Niet gecategoriseerd UR006G

Lees hieronder de 📖 handleiding in het Nederlandse voor Makita UR006G (28 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 28 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/28

INSTRUCTION MANUAL

Cordless Grass Trimmer

UR006G

UR007G

ENGLISH: Original instructions

Read before use.

2 ENGLISH

SPECIFICATIONS

Model: UR006G UR007G

Handle type Bike handle Loop handle

No load speed

(at each rotation speed level)

Cutter blade

Plastic blade (305 mm)

3: 0 - 7,000 min-1

2: 0 - 5,500 min-1

1: 0 - 4,600 min-1

Nylon cutting head

Plastic blade (255 mm)

3: 0 - 5,500 min-1

2: 0 - 5,000 min-1

1: 0 - 4,600 min-1

Overall length

(without cutting tool and battery)

1,815 mm

Nylon cord diameter 2.4 mm

Applicable cutting tool and

cutting diameter

2-tooth blade

(P/N 198345-9)

255 mm

3-tooth blade

(P/N 195299-1)

255 mm

4-tooth blade

(P/N 196895-8)

255 mm

Nylon cutting head

(P/N 197993-1)

430 mm

Plastic blade

(P/N 198383-1)

(P/N 199868-0)

255 mm

305 mm

Rated voltage D.C. 36 V - 40 V max

Net weight 5.7 - 6.3 kg 5.3 - 5.9 kg

Protection degree IPX4

• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange

without notice.

• Specicationsmaydierfromcountrytocountry.

• Theweightmaydierdependingontheattachment(s),includingthebatterycartridge.Thelightestandheavi-

est combination, according to EPTA-Procedure 01/2014, are shown in the table.

Applicable battery cartridge and charger

Battery cartridge BL4020 / BL4025* / BL4040* / BL4050F*

* : Recommended battery

Charger DC40RA / DC40RB / DC40RC

• Some of the battery cartridges and chargers listed above may not be available depending on your region of

residence.

WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridges

andchargersmaycauseinjuryand/orre.

Recommended cord connected power source

Portable power pack PDC01 / PDC1200

• The cord connected power source(s) listed above may not be available depending on your region of residence.

• Before using the cord connected power source, read instruction and cautionary markings on them.

3 ENGLISH

Noise

Model UR006G

Cutting tool

Sound pressure level (LpA

)

dB(A)

Sound power level (LWA)

dB(A)

Applicable

standard

LpA dB(A) Uncer-

tainty (K)

dB(A)

LWA dB(A) Uncer-

tainty (K)

dB(A)

2-tooth blade 80.8 1.0 95.4 0.8

ISO22868

(ISO11806-1)

4-tooth blade 82.9 0.8 99.2 0.5

ISO22868

(ISO11806-1)

Nylon cutting head 81.7 0.9 92.7 1.6

ISO22868

(ISO11806-1)/

EN50636-2-91

Plastic blade 77.0 2.3 88.4 2.4

ISO22868

(ISO11806-1)/

EN50636-2-91

Model UR007G

Cutting tool

Sound pressure level (LpA

)

dB(A)

Sound power level (LWA)

dB(A)

Applicable

standard

LpA dB(A) Uncer-

tainty (K)

dB(A)

LWA dB(A) Uncer-

tainty (K)

dB(A)

2-tooth blade 80.8 1.0 95.4 0.8

ISO22868

(ISO11806-1)

4-tooth blade 82.9 0.8 99.2 0.5

ISO22868

(ISO11806-1)

Nylon cutting head 81.7 0.9 92.7 1.6

ISO22868

(ISO11806-1)/

EN50636-2-91

Plastic blade 77.0 2.3 88.4 2.4

ISO22868

(ISO11806-1)/

EN50636-2-91

• Even if the sound pressure level listed above is 80 dB (A) or less, the level under working may exceed 80 dB

(A). Wear ear protection.

NOTE: The declared noise emission value(s) has been measured in accordance with a standard test method and

may be used for comparing one tool with another.

NOTE: The declared noise emission value(s) may also be used in a preliminary assessment of exposure.

WARNING: Wear ear protection.

WARNING: The noise emission during actual use of the power tool can dier from the declared val-

ue(s) depending on the ways in which the tool is used especially what kind of workpiece is processed.

WARNING: Be sure to identify safety measures to protect the operator that are based on an estimation

of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the

times when the tool is switched o and when it is running idle in addition to the trigger time).

Product specificaties

Merk:	Makita
Categorie:	Niet gecategoriseerd
Model:	UR006G

Heb je hulp nodig?

Als je hulp nodig hebt met Makita UR006G stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Makita

Makita UT002G Handleiding

16 December 2024

Makita CV101D Handleiding

16 December 2024

Makita UN001G Handleiding

5 September 2024

Makita TM001G Handleiding

5 September 2024

Makita DJS101 Handleiding

28 Mei 2024

Makita ADP05 Handleiding

7 Mei 2024

Makita DC4001 Handleiding

7 Mei 2024

Makita BCV03 Handleiding

7 Mei 2024

Makita DC18WA Handleiding

7 Mei 2024

Makita DML803 Handleiding

7 Mei 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Gourmetmaxx 03863 Handleiding

24 December 2024

Vello PGS-P Handleiding

24 December 2024

Venom Quad Charging Station VS4796 Handleiding

24 December 2024

Nec IPJ2000CM Handleiding

24 December 2024

Monogram ZKPN Handleiding

24 December 2024

Philips Quick Clean Pot QCP10 Handleiding

24 December 2024

Philips Senseo HD7002 Handleiding

24 December 2024

D-Link DUB-C2 Handleiding

24 December 2024

Nec MultiPresenter Stick DS1-MP10RX1 Handleiding

24 December 2024

Nec DS1-TM01 Handleiding

24 December 2024