Makita UC4001A Handleiding
Makita
Zaagmachine
UC4001A
Lees hieronder de 📖 handleiding in het Nederlandse voor Makita UC4001A (20 pagina's) in de categorie Zaagmachine. Deze handleiding was nuttig voor 19 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/20
1
Instruction Manual
UC 3001A
UC 3501A
UC 4001A
Important:
Read this instruction manual carefully before putting the chain saw into operation and strictly observe
the safety regulations!
Keep this instruction manual!
2
RE Y
Read instruction manual and follow
the warnings- and safety precautions!
Particular care and attention!
Wear protective helmet,
eye and ear protection!
Pull out the power supply plug!
Pull out the power supply plug
if the cable is damaged!
Chain brake released
Chain brake actuated
Kickback!
Forbidden!
Thank you for your trust in our product
We congratulate you on your new MAKITA electric chain saw.
We are convinced that you will be satisfied with this modern
machine.
MAKITA electric chain saws are characterized by their robust,
high-efficiency motors and high chain velocities which allow an
excellent cutting efficiency. They are equipped with numerous
state-of-the-art safety devices, are light, handy and can be put
into operation immediately wherever electric power is provided.
In order to guarantee the optimal function and performance of
your electric chain saw and to ensure your personal safety we
would request you to perform the following:
Read this instruction manual carefully before putting the
electric chain saw into operation for the first time and
strictly observe the safety regulations! Failure to do so
can result in serious injury to the operator and/or
bystanders!
Table of contents Page
Symbols ..............................................................................2
Delivery inventory ..............................................................3
EU conformity declaration ................................................3
Packing ................................................................................3
SAFETY PRECAUTIONS
General precautions........................................................4
Personal protective equipment .......................................4
Putting into operation .................................................. 4-5
Working behavior/method of working ......................... 5-7
Kickback ..........................................................................7
Transport and storage .................................................... 8
Maintenance....................................................................8
First aid ...........................................................................8
Technical data ....................................................................9
Denomination of components ..........................................9
PUTTING INTO OPERATION
Mounting the guide bar and saw chain .........................10
Tightening the saw chain ..............................................10
Checking the chain tension...........................................11
Chain brake and run-out brake .....................................11
Saw chain oil .................................................................12
Refilling the oil tank................................................. 12-13
Switching on the motor .................................................13
Checking the chain brake .............................................13
Checking the run-out brake .......................................... 14
Checking the chain lubrication......................................14
MAINTENANCE
Sharpening the saw chain ...................................... 14-15
Cleaning the guide bar / lubricating the sprocket nose ....15
Replacing the saw chain ...............................................16
Inspecting and replacing the carbon brushes ..............16
Trouble shooting ..............................................................16
Instructions for periodic maintenance ..........................17
Service, spare parts and guarantee ......................... 17-18
Extract of spare parts list ................................................18
Accessories ...................................................................18
Service centres (see enclosure)
Symbols
You will notice the following symbols on the chain saw and in
the instruction manual:
..... mm
Maximum permissible cut length
Wear protective gloves!
Protect against moisture!
Direction of chain travel
Double protective insulation
Saw chain oil
First aid
Recycling
CE-Marking
3
4
5
2
Delivery inventory
3
1
1. Electric chain saw
2. Guide bar
3. Saw chain
4. Chain protection cover
5. Universal wrench
6. Instruction manual (not shown)
In the case that one of the parts listed should not be included in
the delivery inventory, please, consult your sales agent.
Packing
The MAKITA electric chain saw will be delivered in a protective
cardboard box to prevent transport damages.
Cardboard is a basic raw material and is therefore consequently
reuseable or suitable for recycling (waste paper recycling).
RE Y
EU Conformity Declaration
The undersigned, Junzo Asada and Rainer Bergfeld, as
authorized by DOLMAR GmbH, declare that the MAKITA
machines,
Type: 225 EU prototype test certificate No.
UC 3001A M6 98 06 24243 025
UC 3501A M6 98 06 24243 025
UC 4001A M6 98 06 24243 025
manufactured by DOLMAR GmbH, Jenfelder Str. 38, 22045
Hamburg, Germany, conforms to the basic safety and health
requirements of the applicable EU guidelines:
EU Machine guideline 98/37/ EG, EU EMC guideline 89/336/
EWG (modified by 91/263/ EWG, 92/31/ EWG and 93/68/
EWG), EU Low-voltage guideline 73/23/ EWG (modified by
93/68/ EWG), Noise emission 2000/14/EG.
The most important standards applied to properly meet the
requirements of the above EU guidelines were:
EN 50144-1, HD 400.1, HD 400.3, EN 55014, EN 55014-2, EN
60555-T3, -T3/A1, EN 61000-3-2.
The conformity assessment procedure 2000/14/EG was
performed per Annex V. The measured sound power level
(Lwa) is 99 dB(A). The guaranteed sound power level (Ld) is
101 dB(A).
The EU Type-Examination per 98/37/EG was performed by:
TÜV Product Service GmbH, Zertifizierstelle, Ridlerstr. 31,
D-80339 München.
Hamburg, 1.12. 2001
For DOLMAR GmbH
Junzo Asada Rainer Bergfeld
Managing Director Managing Director
Product specificaties
| Merk: | Makita |
| Categorie: | Zaagmachine |
| Model: | UC4001A |
Heb je hulp nodig?
Als je hulp nodig hebt met Makita UC4001A stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Zaagmachine Makita
2 December 2024
21 Februari 2024
8 Juli 2023
28 Juni 2023
20 Juni 2023
20 Juni 2023
19 Juni 2023
17 Juni 2023
9 Juni 2023
7 Juni 2023
Handleiding Zaagmachine
- Zaagmachine Bosch
- Zaagmachine AEG
- Zaagmachine DeWalt
- Zaagmachine Ford
- Zaagmachine Al-ko
- Zaagmachine Atika
- Zaagmachine BabyGO
- Zaagmachine Batavia
- Zaagmachine Bavaria
- Zaagmachine Bebe Confort
- Zaagmachine BGU
- Zaagmachine Black Decker
- Zaagmachine Blucave
- Zaagmachine Bort
- Zaagmachine Brennenstuhl
- Zaagmachine Bruder Mannesmann
- Zaagmachine Budget
- Zaagmachine Defort
- Zaagmachine Dolmar
- Zaagmachine Dremel
- Zaagmachine Duro
- Zaagmachine Duro Pro
- Zaagmachine Echo
- Zaagmachine Einhell
- Zaagmachine Elektra Beckum
- Zaagmachine Elu
- Zaagmachine Ergofix
- Zaagmachine Exakt
- Zaagmachine Fein
- Zaagmachine Felisatti
- Zaagmachine Ferm
- Zaagmachine Ferrex
- Zaagmachine Festool
- Zaagmachine Flex
- Zaagmachine Florabest
- Zaagmachine FOM
- Zaagmachine Fuxtec
- Zaagmachine Gamma
- Zaagmachine Gardena
- Zaagmachine Gardenline
- Zaagmachine Germania
- Zaagmachine Global
- Zaagmachine Goon
- Zaagmachine Greenworks
- Zaagmachine Grizzly
- Zaagmachine Gude
- Zaagmachine Gude Pro
- Zaagmachine Hammer
- Zaagmachine Hikoki
- Zaagmachine Hitachi
- Zaagmachine Holzmann
- Zaagmachine Homelite
- Zaagmachine Husqvarna
- Zaagmachine Huvema
- Zaagmachine Hyundai
- Zaagmachine Ideal
- Zaagmachine Kompernass
- Zaagmachine Kress
- Zaagmachine Lux Tools
- Zaagmachine Luxor
- Zaagmachine Maestro
- Zaagmachine Maktec
- Zaagmachine Matrix
- Zaagmachine Max
- Zaagmachine Maxx
- Zaagmachine McCulloch
- Zaagmachine Metabo
- Zaagmachine Milwaukee
- Zaagmachine Parkside
- Zaagmachine Pattfield
- Zaagmachine Plantiflor
- Zaagmachine Powerfix
- Zaagmachine Powerplus
- Zaagmachine Remington
- Zaagmachine Robust
- Zaagmachine Ryobi
- Zaagmachine Scheppach
- Zaagmachine Shindaiwa
- Zaagmachine Silverline
- Zaagmachine Skil
- Zaagmachine Solo
- Zaagmachine Stanley
- Zaagmachine Sterwins
- Zaagmachine Stiga
- Zaagmachine Stihl
- Zaagmachine Tanaka
- Zaagmachine Texas
- Zaagmachine Toledo
- Zaagmachine Toolcraft
- Zaagmachine Topcraft
- Zaagmachine Triton
- Zaagmachine Trotec
- Zaagmachine Troy-Bilt
- Zaagmachine Varo
- Zaagmachine Vonroc
- Zaagmachine Westfalia
- Zaagmachine Workzone
- Zaagmachine Worx
- Zaagmachine Zipper
- Zaagmachine Oregon Scientific
- Zaagmachine Ozito
- Zaagmachine Black And Decker
- Zaagmachine Cocraft
- Zaagmachine Draper
- Zaagmachine Meec Tools
- Zaagmachine Lionelo
- Zaagmachine Clarke
- Zaagmachine Genesis
- Zaagmachine Hilti
- Zaagmachine Cobra
- Zaagmachine Hobart
- Zaagmachine ACG
- Zaagmachine Cotech
- Zaagmachine Power Craft
- Zaagmachine Tacklife
- Zaagmachine Truper
- Zaagmachine Fieldmann
- Zaagmachine Mafell
- Zaagmachine Prime3
- Zaagmachine Proxxon
- Zaagmachine Biltema
- Zaagmachine Porter-Cable
- Zaagmachine Sun Joe
- Zaagmachine Yard Force
- Zaagmachine Challenge
- Zaagmachine EGO
- Zaagmachine Hurricane
- Zaagmachine MacAllister
- Zaagmachine Maruyama
- Zaagmachine Sovereign
- Zaagmachine Spear & Jackson
- Zaagmachine Royal Catering
- Zaagmachine Dedra
- Zaagmachine Graphite
- Zaagmachine Narex
- Zaagmachine RIDGID
- Zaagmachine Tryton
- Zaagmachine CMI
- Zaagmachine Garland
- Zaagmachine Herkules
- Zaagmachine Powerworks
- Zaagmachine MSW
- Zaagmachine Sthor
- Zaagmachine Evolution
- Zaagmachine Craftsman
- Zaagmachine Rikon
- Zaagmachine Verto
- Zaagmachine Erbauer
- Zaagmachine Snow Joe
- Zaagmachine Chicago Pneumatic
- Zaagmachine Alpha Tools
- Zaagmachine Hazet
- Zaagmachine Yato
- Zaagmachine Jonsered
- Zaagmachine Qualcast
- Zaagmachine Total
- Zaagmachine Avantco
- Zaagmachine Bestgreen
- Zaagmachine Masport
- Zaagmachine Morrison
- Zaagmachine Stalco
- Zaagmachine Baumr-AG
- Zaagmachine Martha Stewart
- Zaagmachine IKRA
- Zaagmachine MTM
- Zaagmachine Meister Craft
- Zaagmachine Łucznik
- Zaagmachine King Craft
- Zaagmachine Max Bahr
- Zaagmachine Toolson
- Zaagmachine Wolfcraft
- Zaagmachine Kreg
- Zaagmachine Vulcan
- Zaagmachine Anova
- Zaagmachine Challenge Xtreme
- Zaagmachine Pro-Cut
- Zaagmachine Power Smart
- Zaagmachine Backyard Pro Butcher Series
- Zaagmachine EFA
- Zaagmachine Einhell Bavaria
- Zaagmachine McKenzie
- Zaagmachine Prowork
- Zaagmachine Proviel
- Zaagmachine Backyard Pro
- Zaagmachine Ultranatura
- Zaagmachine FIXIT
- Zaagmachine Ergotools Pattfield
- Zaagmachine MyTool
- Zaagmachine Bavaria By Einhell
- Zaagmachine Donau Elektronik
- Zaagmachine Rona
- Zaagmachine TAURUS Titanium
- Zaagmachine Maxbear
- Zaagmachine Extralink
- Zaagmachine Yellow Garden Line
- Zaagmachine Turbo-Silent
Nieuwste handleidingen voor Zaagmachine
20 December 2024
19 December 2024
19 December 2024
17 December 2024
16 December 2024
16 December 2024
16 December 2024
5 December 2024
5 December 2024
5 December 2024