Makita UC3550AP Handleiding

Makita Zaagmachine UC3550AP

Lees hieronder de 📖 handleiding in het Nederlandse voor Makita UC3550AP (24 pagina's) in de categorie Zaagmachine. Deze handleiding was nuttig voor 102 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/24

ENGLISH (Original instructions)

INSTRUCTION MANUAL

DOUBLE INSULATION

IMPORTANT: Read Before Using.

Electric Chain Saw

UC3050A

UC3550A

UC3550AP

UC4050A

UC4550A

UC3051A

UC3551A

UC4051A

UC4551A

014371

ENGLISH (Original instructions)

SPECIFICATIONS

Model

UC3050A UC3051A UC3550A

UC3550AP

UC3551A UC4050A UC4051A UC4550A

UC4551A

Max. chain speed 14.5 m/s (870 m/min)

Bar length 300 mm 350 mm 400 mm 450 mm

Cutting length 260 mm 320 mm 355 mm 415 mm

Standard guide

bar Guide bar type Sprocket nose bar

Type 91PX

Pitch 3/8"

Standard saw

chain

No. of drive links 46 52 56 62

Recommended guide bar length 300 - 450 mm

Overall length (without guide bar) 505 mm

Net weight 5.4 kg 5.5 kg 5.5 kg 5.6 kg 5.5 kg 5.6 kg 5.7 kg

Extension cable (optional) DIN 57282/HO 7RN -F L=30 m max.,3x1.5 mm

• Due to our continuing program of research and development, the specifications herein are subject to change without notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

END218-7

Symbol

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

･ Read instruction manual and follow the

warnings and safety instructions.

･ Wear eye protection.

･ Wear ear protection.

･ DOUBLE INSULATION

･ Caution: particular care and attention

required!

･ Caution: withdraw the mains plug

immediately if the cable is damaged!

･ Caution: kickback!

･ Protect against rain and damp!

･ Wear a helmet, goggles and ear

protection!

･ Wear safety gloves!

･ Withdraw the mains plug!

･ First aid

･ Maximum permissible length of cut

･ Direction of chain travel

･ Chain oil

･ Chain brake released

･ Chain brake applied

･ Prohibited!

･ Only for EU countries

Do not dispose of electric equipment

together with household waste

material!

In observance of the European

Directive, on Waste Electric and

Electronic Equipment and its

implementation in accordance with

national law, electric equipment that

have reached the end of their life must

be collected separately and returned to

an environmentally compatible

recycling facility.

ENE085-1

Intended use

The tool is intended for cutting lumbers and logs.

ENF002-2

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and

can only be operated on single-phase AC supply. They

are double-insulated and can, therefore, also be used

from sockets without earth wire.

ENG905-1

Noise

The typical A-weighted noise level determined

according to EN60745:

Sound pressure level (L

pA) : 90.8 dB (A)

Sound power level (L

WA) : 101.8 dB (A)

Uncertainty (K) : 2.5 dB (A)

Wear ear protection

ENG900-1

Vibration

The vibration total value (tri-axial vector sum)

determined according to EN60745:

Work mode : cutting wood

Vibration emission (ah) : 5.2 m/s2

Uncertainty (K) : 1.5 m/s2

ENG901-1

•

The declared vibration emission value has been

measured in accordance with the standard test method

and may be used for comparing one tool with another.

• The declared vibration emission value may also be

used in a preliminary assessment of exposure.

WARNING:

•

The vibration emission during actual use of the power

tool can differ from the declared emission value

depending on the ways in which the tool is used.

• Be sure to identify safety measures to protect the

operator that are based on an estimation of

exposure in the actual conditions of use (taking

account of all parts of the operating cycle such as

the times when the tool is switched off and when it

is running idle in addition to the trigger time).

ENH021-8

For European countries only

EC Declaration of Conformity

Makita declares that the following Machine(s):

Designation of Machine:

Chain Saw

Model No./ Type:

UC3050A, UC3550A, UC4050A, UC4550A,

UC3051A, UC3551A, UC3550AP, UC4051A,

UC4551A

Specifications: see "SPECIFICATIONS" table.

Conforms to the following European Directives:

2000/14/EC, 2006/42/EC

They are manufactured in accordance with the following

standard or standardized documents:

EN60745

The technical file in accordance with 2006/42/EC is

available from:

Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium

The conformity assessment procedure required by

Directive 2000/14/EC was in Accordance with annex V

Measured Sound Power Level: 101.9 dB (A)

Guaranteed Sound Power Level: 103 dB (A)

8.5.2014

000331

Yasushi Fukaya

Director

Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium

GEA005-3

General Power Tool Safety

Warnings

WARNING Read all safety warnings and all

instructions. Failure to follow the warnings and

instructions may result in electric shock, fire and/or

serious injury.

Save all warnings and

instructions for future reference.

The term "power tool" in the warnings refers to your

mains-operated (corded) power tool or battery-operated

(cordless) power tool.

Work area safety

1. Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

2. Do not operate power tools in explosive

atmospheres, such as in the presence of

flammable liquids, gases or dust. Power tools

create sparks which may ignite the dust or fumes.

3. Keep children and bystanders away while

operating a power tool. Distractions can cause

you to lose control.

Electrical safety

4. Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power

tools. Unmodified plugs and matching outlets will

reduce risk of electric shock.

5. Avoid body contact with earthed or grounded

surfaces such as pipes, radiators, ranges and

refrigerators. There is an increased risk of

electric shock if your body is earthed or grounded.

6. Do not expose power tools to rain or wet

conditions. Water entering a power tool will

increase the risk of electric shock.

Product specificaties

Merk:	Makita
Categorie:	Zaagmachine
Model:	UC3550AP
Kleur van het product:	Black, Blue
Gewicht:	5700 g
Snoerlengte:	5 m
Stroombron:	AC
Vermogen:	2000 W
Lengte:	505 mm
Stationair toerental:	- RPM
Lemmet lengte:	- mm
Chain snelheid:	14.5 m/s
Chain bar lengte:	350 mm
Inhoud olietank:	0.2 l
Chain hoogte:	3/8 "