Makita UC014G Handleiding


Lees hieronder de ๐Ÿ“– handleiding in het Nederlandse voor Makita UC014G (24 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 211 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/24
INSTRUCTION MANUAL
Cordless Chain Saw
UC014G
UC015G
UC016G
UC017G
ENGLISH: Original instructions
Read before use.
2 ENGLISH
SPECIFICATIONS
Model: UC014G UC015G UC016G UC017G
Overall length
(without guide bar)
445 mm
Rated voltage D.C. 36 V - 40 V max
Net weight 4.5 kg*1
*2 6.2 - 6.9 kg
Standard guide bar length 300 mm 350 mm 400 mm 450 mm
Recommended guide bar length 300 - 450 mm
Applicable saw chain type
(refer to the table below)
91PX
80TXL
Sprocket
(91PX)
Number of teeth 6
Pitch 3/8โ€ณ
Sprocket
(80TXL)
Number of teeth 7
Pitch 0.325โ€ณ
Chain speed 0 - 25.5 m/s
(0 - 1,530 m/min)
Chain oil tank volume 260 cm
3
Protection degree IPX4
โ€ข๎˜ƒ Due๎˜ƒto๎˜ƒour๎˜ƒcontinuing๎˜ƒprogram๎˜ƒof๎˜ƒresearch๎˜ƒand๎˜ƒdevelopment,๎˜ƒthe๎˜ƒspeci๎šฟcations๎˜ƒherein๎˜ƒare๎˜ƒsubject๎˜ƒto๎˜ƒchange๎˜ƒ
without notice.
โ€ข๎˜ƒ Speci๎šฟcations๎˜ƒmay๎˜ƒdi๓ฐ€จer๎˜ƒfrom๎˜ƒcountry๎˜ƒto๎˜ƒcountry.
*1: Weight, without the saw chain, guide bar, guide bar cover, oil and battery cartridge(s).
*2:๎˜ƒThe๎˜ƒlightest๎˜ƒand๎˜ƒheaviest๎˜ƒcombination๎˜ƒof๎˜ƒweight,๎˜ƒaccording๎˜ƒto๎˜ƒEPTA-Procedure๎˜ƒ01/2014.๎˜ƒThe๎˜ƒweight๎˜ƒmay๎˜ƒdi๓ฐ€จer๎˜ƒ
depending on the attachment(s), including the battery cartridge(s).
Saw chain, guide bar, and sprocket combination
Saw chain type 91PX
Number of drive links 46 52 56 62
Guide bar Guide bar length 300 mm 350 mm 400 mm 450 mm
Cutting length 268 mm 324 mm 361 mm 418 mm
Pitch 3/8โ€ณ
Gauge 1.3 mm
Type Sprocket nose bar
Sprocket Number of teeth 6
Pitch 3/8โ€ณ
Saw chain type 80TXL
Number of drive links 51 59 64 70
Guide bar Guide bar length 300 mm 350 mm 400 mm 450 mm
Cutting length 259 mm 325 mm 366 mm 416 mm
Pitch 0.325โ€ณ
Gauge 1.1 mm
Type Sprocket nose bar
Sprocket Number of teeth 7
Pitch 0.325โ€ณ
WARNING:๎˜ƒUse๎˜ƒappropriate๎˜ƒcombination๎˜ƒof๎˜ƒthe๎˜ƒguide๎˜ƒbar๎˜ƒand๎˜ƒsaw๎˜ƒchain.๎˜ƒOtherwise๎˜ƒpersonal๎˜ƒinjury๎˜ƒmay๎˜ƒ
result.
3 ENGLISH
Applicable battery cartridge and charger
Battery cartridge BL4040 / BL4050F*
* : Recommended battery
Charger DC40RA / DC40RB / DC40RC
โ€ข
Some of the battery cartridges and chargers listed above may not be available depending on your region of residence.
WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and๎˜ƒchargers๎˜ƒmay๎˜ƒcause๎˜ƒinjury๎˜ƒand/or๎˜ƒ๎šฟre.
Recommended cord connected power source
Portable power pack PDC01
โ€ข The cord connected power source(s) listed above may not be available depending on your region of residence.
โ€ข Before using the cord connected power source, read instruction and cautionary markings on them.
Symbols
The followings show the symbols which may be used for the equip-
ment. Be sure that you understand their meaning before use.
Read instruction manual.
Wear safety glasses.
Wear ear protection.
Wear a helmet, goggles and ear protection.
Maximum permissible cut length
Always use two hands when operating the
chain saw.
Beware of chain saw kickback and avoid
contact with bar tip.
Direction of chain travel
Saw๎˜ƒchain๎˜ƒoil๎˜ƒadjustment
Ni-MH
Li-ion
Only for EU countries
Due to the presence of hazardous com-
ponents in the equipment, waste electrical
and electronic equipment, accumulators
and batteries may have a negative impact
on the environment and human health.
Do not dispose of electrical and electronic
appliances or batteries with household waste!
In accordance with the European Directive
on waste electrical and electronic equipment
and on accumulators and batteries and waste
accumulators and batteries, as well as their
adaptation to national law, waste electrical
equipment, batteries and accumulators
should be stored separately and delivered
to a separate collection point for municipal
waste, operating in accordance with the
regulations on environmental protection.
This is indicated by the symbol of the crossed-
out wheeled bin placed on the equipment.
Guaranteed sound power level according
to EU Outdoor Noise Directive.
Sound power level according to Australia
NSW Noise Control Regulation.
Intended use
This chain saw is intended for sawing wood.
Noise
The typical A-weighted noise level determined accord-
ing to EN62841-4-1:
Model UC014G
Sound pressure level (L
pA) : 91 dB(A)
Sound power level (L
WA) : 102 dB (A)
Uncertainty (K) : 3 dB(A)
Model UC015G
Sound pressure level (L
pA) : 91 dB(A)
Sound power level (L
WA) : 102 dB (A)
Uncertainty (K) : 3 dB(A)
Model UC016G
Sound pressure level (L
pA) : 91 dB(A)
Sound power level (L
WA) : 102 dB (A)
Uncertainty (K) : 3 dB(A)
Model UC017G
Sound pressure level (L
pA) : 91 dB(A)
Sound power level (L
WA) : 102 dB (A)
Uncertainty (K) : 3 dB(A)
NOTE: The declared noise emission value(s) has
been measured in accordance with a standard test
method and may be used for comparing one tool with
another.
NOTE: The declared noise emission value(s)
may also be used in a preliminary assessment of
exposure.


Product specificaties

Merk: Makita
Categorie: Niet gecategoriseerd
Model: UC014G

Heb je hulp nodig?

Als je hulp nodig hebt met Makita UC014G stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Makita

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Electrolux

Electrolux STA9 Handleiding

23 November 2024
Electrolux

Electrolux UMP3 Handleiding

23 November 2024
Bosch

Bosch HEZ8TK36UC Handleiding

23 November 2024
Bosch

Bosch HEZ8ZZ36UC Handleiding

23 November 2024
Bosch

Bosch HDZIT301 Handleiding

23 November 2024
Bosch

Bosch HEZBS301 Handleiding

23 November 2024
LG

LG LX-330 Handleiding

23 November 2024
Bosch

Bosch KSZ2AVU00 Handleiding

22 November 2024