Makita TM30DWAE Handleiding

Makita Multitool TM30DWAE

Lees hieronder de 📖 handleiding in het Nederlandse voor Makita TM30DWAE (12 pagina's) in de categorie Multitool. Deze handleiding was nuttig voor 21 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/12

INSTRUCTION MANUAL

Cordless Multi Tool

TM30D

ENGLISH: Original instructions

Read before use.

2 ENGLISH

SPECIFICATIONS

Model: TM30D

Oscillation per minute 6,000 - 20,000 min

-1

Oscillation angle, left/right 1.6° (3.2° total)

Rated voltage D.C. 10.8 V - 12 V max

Battery cartridge BL1016, BL1021B BL1041B

Overall length 277 mm 296 mm

Net weight without dust extraction

attachment

1.1 kg 1.2 kg

with dust extraction

attachment

1.2 kg 1.3 kg

• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange

without notice.

• Specicationsandbatterycartridgemaydifferfromcountrytocountry.

• Weight,withbatterycartridge,accordingtoEPTA-Procedure01/2003

Symbols

Thefollowingshowthesymbolsusedfortheequip-

ment. Be sure that you understand their meaning before

use.

Read instruction manual.

Wearsafetyglasses.

OnlyforEUcountries

Donotdisposeofelectricequipment

together with household waste material! In

observanceoftheEuropeanDirective,on

WasteElectricandElectronicEquipment

and its implementation in accordance with

nationallaw,electricequipmentthathave

reached the end of their life must be col-

lected separately and returned to an envi-

ronmentally compatible recycling facility.

Intended use

Thetoolisintendedforsawingandcuttingwood,

plastic, gypsum, non-ferrous metals, and fastening

elements (e. g. unhardened nails and staples). It is also

intended for working soft wall tiles, as well as dry sand-

ing and scraping of small surfaces. It is especially for

workingclosetoedgeandushcutting.

Noise

ThetypicalA-weightednoiseleveldeterminedaccord-

ingtoEN60745:

Workmode:Sanding

Soundpressurelevel(L

pA):75dB(A)

Uncertainty(K):3dB(A)

Thenoiselevelunderworkingmayexceed80dB(A).

Workmode:Cuttingwithplungecutsawblade

Soundpressurelevel(L

pA):82dB(A)

Soundpowerlevel(L

WA):93dB(A)

Uncertainty(K):3dB(A)

Workmode:Cuttingwithsegmentalsawblade

Soundpressurelevel(L

pA):81dB(A)

Soundpowerlevel(L

WA):92dB(A)

Uncertainty(K):3dB(A)

Workmode:Scraping

Soundpressurelevel(L

pA ):81dB(A)

Soundpowerlevel(L

WA):92dB(A)

Uncertainty(K):3dB(A)

WARNING: Wear ear protection.

Vibration

Thevibrationtotalvalue(tri-axialvectorsum)deter-

minedaccordingtoEN60745:

Workmode:Sanding

Vibration emission (a

h):2.5m/s2 or less

Uncertainty(K):1.5m/s

Workmode:Cuttingwithplungecutsawblade

Vibration emission (a

h):10.5m/s2

Uncertainty(K):1.5m/s

Workmode:Cuttingwithsegmentalsawblade

Vibration emission (a

h):5.5m/s2

Uncertainty(K):1.5m/s

Workmode:Scraping

Vibration emission (a

h):9.0m/s2

Uncertainty(K):1.5m/s

NOTE:Thedeclaredvibrationemissionvaluehas

been measured in accordance with the standard test

method and may be used for comparing one tool with

another.

NOTE:Thedeclaredvibrationemissionvalue

may also be used in a preliminary assessment of

exposure.

WARNING:Thevibrationemissionduringactual

use of the power tool can differ from the declared

emission value depending on the ways in which the

tool is used.

WARNING: Be sure to identify safety measures

to protect the operator that are based on an estima-

tion of exposure in the actual conditions of use (taking

account of all parts of the operating cycle such as

the times when the tool is switched off and when it is

running idle in addition to the trigger time).

3 ENGLISH

EC Declaration of Conformity

For European countries only

MakitadeclaresthatthefollowingMachine(s):

DesignationofMachine:CordlessMultiTool

ModelNo./Type:TM30D

ConformstothefollowingEuropeanDirectives:

2006/42/EC

Theyaremanufacturedinaccordancewiththefollowing

standardorstandardizeddocuments:EN60745

Thetechnicalleinaccordancewith2006/42/ECis

availablefrom:

Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium

24.9.2015

Yasushi Fukaya

Director

Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium

SAFETY WARNINGS

General power tool safety warnings

WARNING:

Read all safety warnings and all

instructions. Failure to follow the warnings and instruc-

tionsmayresultinelectricshock,reand/orseriousinjury.

Save all warnings and instruc-

tions for future reference.

Theterm"powertool"inthewarningsreferstoyourmains-oper-

ated (corded) power tool or battery-operated (cordless) power tool.

Work area safety

1. Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

2. Do not operate power tools in explosive atmo-

spheres, such as in the presence of ammable

liquids, gases or dust.Powertoolscreatesparks

which may ignite the dust or fumes.

Keep children and bystanders away while operating

a power tool. Distractions can cause you to lose control.

Electrical Safety

1. Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power

tools. Unmodiedplugsandmatchingoutletswill

reduce risk of electric shock.

2. Avoid body contact with earthed or grounded

surfaces such as pipes, radiators, ranges and

refrigerators.Thereisanincreasedriskofelec-

tric shock if your body is earthed or grounded.

3. Do not expose power tools to rain or wet con-

ditions.Waterenteringapowertoolwillincrease

the risk of electric shock.

4. Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges

or moving parts. Damaged or entangled cords

increase the risk of electric shock.

5.

When operating a power tool outdoors, use an

extension cord suitable for outdoor use.Useofacord

suitable for outdoor use reduces the risk of electric shock.

6. If operating a power tool in a damp location

is unavoidable, use a residual current device

(RCD) protected supply.UseofanRCDreduces

the risk of electric shock.

Personal Safety

1. Stay alert, watch what you are doing and use

common sense when operating a power tool.

Do not use a power tool while you are tired or

under the inuence of drugs, alcohol or med-

ication.Amomentofinattentionwhileoperating

powertoolsmayresultinseriouspersonalinjury.

Use personal protective equipment. Always wear eye

protection.Protectiveequipmentsuchasdustmask,non-

skid safety shoes, hard hat, or hearing protection used for

appropriateconditionswillreducepersonalinjuries.

3. Prevent unintentional starting. Ensure the

switch is in the off-position before connecting

to power source and/or battery pack, picking

up or carrying the tool. Carrying power tools with

yourngerontheswitchorenergisingpowertools

that have the switch on invites accidents.

4. Remove any adjusting key or wrench before

turning the power tool on.Awrenchorakeyleft

attached to a rotating part of the power tool may

resultinpersonalinjury.

5. Do not overreach. Keep proper footing and

balance at all times.Thisenablesbettercontrol

of the power tool in unexpected situations.

6. Dress properly. Do not wear loose clothing or

jewellery. Keep your hair, clothing, and gloves

away from moving parts.Looseclothes,jewel-

lery or long hair can be caught in moving parts.

7. If devices are provided for the connection of

dust extraction and collection facilities, ensure

these are connected and properly used.Useof

dust collection can reduce dust-related hazards.

Power tool use and care

1. Do not force the power tool. Use the correct

power tool for your application.Thecorrect

powertoolwilldothejobbetterandsaferatthe

rate for which it was designed.

Do not use the power tool if the switch does not turn

it on and off.Anypowertoolthatcannotbecontrolled

with the switch is dangerous and must be repaired.

3. Disconnect the plug from the power source

and/or the battery pack from the power tool

before making any adjustments, changing

accessories, or storing power tools.Suchpre-

ventive safety measures reduce the risk of starting

the power tool accidentally.

4. Store idle power tools out of the reach of chil-

dren and do not allow persons unfamiliar with

the power tool or these instructions to operate

the power tool.Powertoolsaredangerousinthe

hands of untrained users.

5. Maintain power tools. Check for misalignment

or binding of moving parts, breakage of parts

and any other condition that may affect the

power tool’s operation. If damaged, have the

power tool repaired before use. Many accidents

are caused by poorly maintained power tools.

Product specificaties

Merk:	Makita
Categorie:	Multitool
Model:	TM30DWAE

Heb je hulp nodig?

Als je hulp nodig hebt met Makita TM30DWAE stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Multitool Makita

Makita TM30DSMJX4 Handleiding

21 Juni 2023

Makita 195711-1 Handleiding

27 Mei 2023

Makita TD110D Handleiding

19 Mei 2023

Makita TM3000CX1J Handleiding

10 Mei 2023

Makita BTM40ZJX3 Handleiding

8 Mei 2023

Makita 199339-7 Handleiding

5 Mei 2023

Makita BTM50RFEX3 Handleiding

4 Mei 2023

Makita DTM51ZJX3 Handleiding

25 April 2023

Makita 195652-1 Handleiding

19 April 2023

Makita TM30DZJX4 Handleiding

18 April 2023

Handleiding Multitool

Nieuwste handleidingen voor Multitool

Powerblade PC4MT5 Handleiding

10 December 2024

EGO PH1420E Handleiding

8 December 2024

Einhell TE-MG 200 E Handleiding

4 December 2024

Alpha Tools A 180 Handleiding

17 November 2024

EGO MRC2306E Handleiding

17 November 2024

Workzone WZMS 10,8 Li Handleiding

14 November 2024

Vonroc OT505DC Handleiding

20 Oktober 2024

Ozito PXPPHTK-258 Handleiding

23 Augustus 2024

Ozito PXGMTK-2536 Handleiding

30 Juli 2024

Einhell BT-MG 180/1 Handleiding

10 Juli 2024