Makita LW1400 Handleiding

Makita Zaagmachine LW1400

Lees hieronder de 📖 handleiding in het Nederlandse voor Makita LW1400 (12 pagina's) in de categorie Zaagmachine. Deze handleiding was nuttig voor 11 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/12

INSTRUCTION MANUAL

Portable Cut-Off

LW1400

LW1401

ENGLISH: Original instructions

DOUBLE INSULATION

Read before use.

2 ENGLISH

SPECIFICATIONS

Model: LW1400 LW1401

Wheel diameter 355 mm

Hole diameter 25.4 mm

No load speed 3,800 min-1

Dimensions

(L x W x H)

With European type safety

guard

530 mm x 295 mm x 640 mm 500 mm x 295 mm x 640 mm

With safety guard other than

European type

530 mm x 290 mm x 640 mm 500 mm x 290 mm x 620 mm

Net weight With European type safety

guard and under cover

18.7 kg 18.3 kg

Safety class /II

• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange

without notice.

• Specicationsmaydifferfromcountrytocountry.

• WeightaccordingtoEPTA-Procedure01/2003

• Theshapeandweightvarydependingonthespecicationswhichdiffercountrytocountry.

Symbols

The following show the symbols used for the equip-

ment. Be sure that you understand their meaning before

use.

Wear safety glasses.

Read instruction manual.

DOUBLE INSULATION

Only for EU countries

Do not dispose of electric equipment

together with household waste material! In

observance of the European Directive, on

Waste Electric and Electronic Equipment

and its implementation in accordance with

national law, electric equipment that have

reached the end of their life must be col-

lected separately and returned to an envi-

ronmentally compatible recycling facility.

Intended use

The tool is intended for cutting in ferrous materials with

appropriate abrasive cut-off wheel. Follow all laws and

regulations regarding dust and work area health and

safety in your country.

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and

can only be operated on single-phase AC supply. They

are double-insulated and can, therefore, also be used

from sockets without earth wire.

For public low-voltage distribution

systems of between 220 V and 250 V

Switching operations of electric apparatus cause volt-

ageuctuations.Theoperationofthisdeviceunder

unfavorable mains conditions can have adverse effects

to the operation of other equipment. With a mains

impedance equal or less than 0.18 Ohms it can be pre-

sumed that there will be no negative effects. The mains

socket used for this device must be protected with a

fuse or protective circuit breaker having slow tripping

characteristics.

Noise

The typical A-weighted noise level determined accord-

ing to EN61029:

Model LW1400

Sound pressure level (LpA) : 102 dB(A)

Sound power level (LWA) : 110 dB (A)

Uncertainty (K) : 3 dB(A)

Model LW1401

Sound pressure level (LpA) : 102 dB(A)

Sound power level (LWA) : 110 dB (A)

Uncertainty (K) : 3 dB(A)

WARNING: Wear ear protection.

Vibration

The vibration total value (tri-axial vector sum) deter-

mined according to EN61029:

Model LW1400

Vibration emission (ah) : 2.5 m/s2 or less

Uncertainty (K) : 1.5 m/s2

Model LW1401

Vibration emission (ah) : 2.5 m/s2 or less

Uncertainty (K) : 1.5 m/s2

3 ENGLISH

NOTE: The declared vibration emission value has

been measured in accordance with the standard test

method and may be used for comparing one tool with

another.

NOTE: The declared vibration emission value

may also be used in a preliminary assessment of

exposure.

WARNING: The vibration emission during actual

use of the power tool can differ from the declared

emission value depending on the ways in which the

tool is used.

WARNING: Be sure to identify safety measures

to protect the operator that are based on an estima-

tion of exposure in the actual conditions of use (taking

account of all parts of the operating cycle such as

the times when the tool is switched off and when it is

running idle in addition to the trigger time).

EC Declaration of Conformity

For European countries only

Makita declares that the following Machine(s):

DesignationofMachine:PortableCut-Off

Model No./ Type: LW1400, LW1401

Conforms to the following European Directives:

2006/42/EC

They are manufactured in accordance with the following

standard or standardized documents: EN61029

Thetechnicalleinaccordancewith2006/42/ECis

available from:

Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium

21.5.2015

Yasushi Fukaya

Director

Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium

General power tool safety warnings

WARNING: Read all safety warnings and

all instructions. Failure to follow the warnings and

instructionsmayresultinelectricshock,reand/or

seriousinjury.

Save all warnings and instruc-

tions for future reference.

The term "power tool" in the warnings refers to your

mains-operated (corded) power tool or battery-operated

(cordless) power tool.

Work area safety

1. Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

2. Do not operate power tools in explosive atmo-

spheres, such as in the presence of ammable

liquids, gases or dust.Powertoolscreatesparks

which may ignite the dust or fumes.

3. Keep children and bystanders away while

operating a power tool. Distractions can cause

you to lose control.

Electrical Safety

1. Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power

tools. Unmodiedplugsandmatchingoutletswill

reduce risk of electric shock.

2. Avoid body contact with earthed or grounded

surfaces such as pipes, radiators, ranges and

refrigerators. There is an increased risk of elec-

tric shock if your body is earthed or grounded.

3. Do not expose power tools to rain or wet con-

ditions. Water entering a power tool will increase

the risk of electric shock.

4. Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges

or moving parts. Damaged or entangled cords

increase the risk of electric shock.

5. When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of

a cord suitable for outdoor use reduces the risk of

electric shock.

6. If operating a power tool in a damp location

is unavoidable, use a residual current device

(RCD) protected supply. Use of an RCD reduces

the risk of electric shock.

7. Use of power supply via an RCD with a rated

residual current of 30 mA or less is always

recommended.

Personal Safety

1. Stay alert, watch what you are doing and use

common sense when operating a power tool.

Do not use a power tool while you are tired or

under the inuence of drugs, alcohol or med-

ication. A moment of inattention while operating

powertoolsmayresultinseriouspersonalinjury.

2. Use personal protective equipment. Always

wear eye protection.Protectiveequipmentsuch

as dust mask, non-skid safety shoes, hard hat, or

hearing protection used for appropriate conditions

willreducepersonalinjuries.

3. Prevent unintentional starting. Ensure the

switch is in the off-position before connecting

to power source and/or battery pack, picking

up or carrying the tool. Carrying power tools with

yourngerontheswitchorenergisingpowertools

that have the switch on invites accidents.

4. Remove any adjusting key or wrench before

turning the power tool on. A wrench or a key left

attached to a rotating part of the power tool may

resultinpersonalinjury.

5. Do not overreach. Keep proper footing and

balance at all times. This enables better control

of the power tool in unexpected situations.

6. Dress properly. Do not wear loose clothing or

jewellery. Keep your hair, clothing, and gloves

away from moving parts.Looseclothes,jewel-

lery or long hair can be caught in moving parts.

7. If devices are provided for the connection of

dust extraction and collection facilities, ensure

these are connected and properly used. Use of

dust collection can reduce dust-related hazards.

Product specificaties

Merk:	Makita
Categorie:	Zaagmachine
Model:	LW1400
Kleur van het product:	Black, Blue, Stainless steel
Gewicht:	18700 g
Breedte:	295 mm
Diepte:	530 mm
Hoogte:	640 mm
Stroombron:	AC
Input vermogen:	2200 W
Stationair toerental (max):	3800 RPM
Geluidsdrukniveau:	102 dB
Onzekerheid K:	1.5 m/s²
Asvergrendeling:	Ja
Geluidsniveau onzekerheid:	3 dB
Zaagblad wisselen zonder gereedschap:	Ja
Vibratie emissie:	2.5 m/s²
Extra handgreep:	Ja
Mes doorsnede:	355 mm
Snij-diepte (90º):	- mm
Saw blade included:	Ja
Beschermingsklasse:	II
Asgat:	25.4 mm
Geluidsvermogensniveau:	110 dB
Type zaagblad:	Enkel blad
Bladdikte (max):	3 mm