Makita LH1040 Handleiding

Makita Zaagmachine LH1040

Lees hieronder de 📖 handleiding in het Nederlandse voor Makita LH1040 (36 pagina's) in de categorie Zaagmachine. Deze handleiding was nuttig voor 11 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/36

ENGLISH (Original instructions)

INSTRUCTION MANUAL

DOUBLE INSULATION

IMPORTANT: Read Before Using.

Table Top Miter Saw

LH1040

LH1040F

012649

ENGLISH (Original instructions)

SPECIFICATIONS

Model LH1040 / LH1040F

Blade diameter 255 mm -260 mm

Blade body thickness 1.6 mm - 1.8 mm

Riving knife thickness 2.0 mm

Hole diameter

For all countries other than European countries 25.4 mm and 25 mm

For European countries 30 mm

Max. Cutting capacities (H x W) with blade 260 mm in diameter in the miter saw mode

Miter angle

Bevel angle 0° 45°

69 mm x 130 mm

right 69 mm x 85 mm, 93 mm x 67 mm

0° 93 mm x 95 mm

left 69 mm x 85 mm, 93 mm x 67 mm

35 mm x 130 mm

right 35 mm x 91 mm, 49 mm x 67 mm

45° (left) 53 mm x 95 mm

left 35 mm x 65 mm, 49 mm x 42 mm

Max. Cutting capacities at 90°in the table saw (bench saw mode) 40 mm

No load speed (min-1) 4,800

Table size (W x L) 260 mm x 405 mm

Dimensions (L x W x H) 530 mm x 476 mm x 535 mm

Net weight 14.3 kg

Safety class /II

• Due to our continuing program of research and development, the specifications herein are subject to change without notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

END208-6

Symbols

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

･ Read instruction manual.

･ DOUBLE INSULATION

･ To avoid injury from flying debris, keep

holding the saw head down, after

making cuts, until the blade has come to

a complete stop.

･ When using the tool in the miter saw

mode, secure the top table at the

topmost position so that the saw blade

never protrudes from the top surface of

the top table.

･ Do not place hand or fingers close to the

blade.

･ For your safety, remove the chips, small

pieces, etc. from the table top before

operation.

･ Only for EU countries

Do not dispose of electric equipment

together with household waste material!

In observance of the European Directive,

on Waste Electric and Electronic

Equipment and its implementation in

accordance with national law, electric

equipment that have reached the end of

their life must be collected separately

and returned to an environmentally

compatible recycling facility.

ENE060-1

Intended use

The tool is intended for accurate straight cutting and

(only when used as a miter saw on the lower table) miter

cutting in wood.

ENF002-2

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and can

only be operated on single-phase AC supply. They are

double-insulated and can, therefore, also be used from

sockets without earth wire.

ENG905-1

Noise

The typical A-weighted noise level determined according

to EN61029:

Sound pressure level (L

pA) : 93 dB (A)

Sound power level (L

WA) : 107 dB (A)

Uncertainty (K) : 3 dB (A)

Wear ear protection

ENG900-1

Vibration

The vibration total value (tri-axial vector sum) determined

according to EN61029:

Vibration emission (ah) : 2.5 m/s2 or less

Uncertainty (K) : 1.5 m/s2

ENG901-1

• The declared vibration emission value has been

measured in accordance with the standard test

method and may be used for comparing one tool

with another.

• The declared vibration emission value may also be

used in a preliminary assessment of exposure.

WARNING:

• The vibration emission during actual use of the

power tool can differ from the declared emission

value depending on the ways in which the tool is

used.

• Be sure to identify safety measures to protect the

operator that are based on an estimation of

exposure in the actual conditions of use (taking

account of all parts of the operating cycle such as

the times when the tool is switched off and when it

is running idle in addition to the trigger time).

ENH003-14

For European countries only

EC Declaration of Conformity

We Makita Corporation as the responsible

manufacturer declare that the following Makita

machine(s):

Designation of Machine:

Table Top Miter Saw

Model No./ Type: LH1040, LH1040F

are of series production and

Conforms to the following European Directives:

2006/42/EC

And are manufactured in accordance with the following

standards or standardised documents:

EN61029

The technical documentation is kept by:

Makita International Europe Ltd.

Technical Department,

Michigan Drive, Tongwell,

Milton Keynes, Bucks MK15 8JD, England

11.2.2010

000230

Tomoyasu Kato

Director

Makita Corporation

3-11-8, Sumiyoshi-cho,

Anjo, Aichi, 446-8502, JAPAN

ENA001-2

SAFETY INSTRUCTIONS

WARNING! When using electric tools, basic safety

precautions, including the following, should always

be followed to reduce the risk of fire, electric shock

and personal injury. Read all these instructions

before operating this product and save these

instructions.

For safe operations:

1. Keep work area clean.

Cluttered areas and benches invite injuries.

2. Consider work area environment.

Do not expose power tools to rain. Do not use

power tools in damp or wet locations. Keep work

area well lit. Do not use power tools where there is

risk to cause fire or explosion.

3. Guard against electric shock.

Avoid body contact with earthed or grounded

surfaces (e.g. pipes, radiators, ranges,

refrigerators).

4. Keep children away.

Do not let visitors touch the tool or extension cord.

All visitors should be kept away from work area.

5. Store idle tools.

When not in use, tools should be stored in a dry,

high or locked up place, out of reach of children.

6. Do not force the tool.

It will do the job better and safer at the rate for

which it was intended.

7. Use the right tool.

Do not force small tools or attachments to do the

job of a heavy duty tool. Do not use tools for

purposes not intended; for example, do not use

circular saws to cut tree limbs or logs.

8. Dress properly.

Do not wear loose clothing or jewellery, they can

be caught in moving parts. Rubber gloves and

non-skid footwear are recommended when

working outdoors. Wear protecting hair covering to

contain long hair.

9. Use safety glasses and hearing protection.

Also use face or dust mask if the cutting operation

is dusty.

Product specificaties

Merk:	Makita
Categorie:	Zaagmachine
Model:	LH1040
Gewicht:	14300 g
Breedte:	476 mm
Diepte:	530 mm
Hoogte:	535 mm
Snoerlengte:	2.5 m
Stroombron:	AC
Input vermogen:	1650 W
Stationair toerental (max):	4800 RPM
Meegeleverde stofzak:	Ja
Mes doorsnede:	260 mm
Asgat:	15.88 mm
Tafelzaag mode:	Ja
Stroomverbruik (typisch):	1650 W
Type zaagblad:	Tungsten carbide-tipped (TCT)
Snij capaciteit 0°:	93 mm
Snij capaciteit 45° mitre:	53 x 95 mm
Aanvoerapparaat:	Ja