Makita HS7611J Handleiding

Makita Zaagmachine HS7611J

Lees hieronder de 📖 handleiding in het Nederlandse voor Makita HS7611J (12 pagina's) in de categorie Zaagmachine. Deze handleiding was nuttig voor 34 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/12

INSTRUCTION MANUAL

Circular Saw

HS7611

ENGLISH: Original instructions

DOUBLE INSULATION

Read before use.

2 ENGLISH

SPECIFICATIONS

Model: HS7611

Blade diameter 185 - 190 mm

Max. Cutting depth at 0° 63 - 65 mm

at 45° bevel 44 - 45 mm

No load speed 5,500 min-1

Overall length 311 mm

Net weight 3.9 kg

Safety class /II

• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange

without notice.

• Specicationsmaydifferfromcountrytocountry.

• WeightaccordingtoEPTA-Procedure01/2014

Symbols

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

Read instruction manual.

DOUBLE INSULATION

Only for EU countries

Do not dispose of electric equipment

together with household waste material! In

observance of the European Directive, on

WasteElectricandElectronicEquipment

and its implementation in accordance with

national law, electric equipment that have

reached the end of their life must be col-

lected separately and returned to an envi-

ronmentally compatible recycling facility.

Intended use

The tool is intended for performing lengthways and cross-

ways straight cuts and mitre cuts with angles in wood while

inrmcontactwiththeworkpiece.WithappropriateMakita

genuine saw blades, other materials can also be sawed.

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and

can only be operated on single-phase AC supply. They

are double-insulated and can, therefore, also be used

from sockets without earth wire.

For public low-voltage distribution

systems of between 220 V and 250 V

Switching operations of electric apparatus cause volt-

ageuctuations.Theoperationofthisdeviceunder

unfavorable mains conditions can have adverse effects

totheoperationofotherequipment.Withamains

impedance equal or less than 0.33 Ohms it can be pre-

sumed that there will be no negative effects. The mains

socket used for this device must be protected with a

fuse or protective circuit breaker having slow tripping

characteristics.

Noise

The typical A-weighted noise level determined accord-

ingtoEN62841:

Sound pressure level (L

pA):95dB(A)

Sound power level (L

WA):106dB(A)

Uncertainty(K):3dB(A)

WARNING: Wear ear protection.

Vibration

The vibration total value (tri-axial vector sum) deter-

minedaccordingtoEN62841:

Workmode:cuttingwood

Vibration emission (a

h,W):2.5m/s2 or less

Uncertainty(K):1.5m/s

NOTE: The declared vibration emission value has

been measured in accordance with the standard test

method and may be used for comparing one tool with

another.

NOTE: The declared vibration emission value

may also be used in a preliminary assessment of

exposure.

WARNING: The vibration emission during actual

use of the power tool can differ from the declared

emission value depending on the ways in which the

tool is used.

WARNING: Be sure to identify safety measures

to protect the operator that are based on an estima-

tion of exposure in the actual conditions of use (taking

account of all parts of the operating cycle such as

the times when the tool is switched off and when it is

running idle in addition to the trigger time).

EC Declaration of Conformity

For European countries only

The EC declaration of conformity is included as Annex A

to this instruction manual.

3 ENGLISH

SAFETY WARNINGS

General power tool safety warnings

WARNING:

Read all safety warnings, instruc-

tions, illustrations and specications provided with this

power tool. Failure to follow all instructions listed below

mayresultinelectricshock,reand/orseriousinjury.

Save all warnings and instruc-

tions for future reference.

The term "power tool" in the warnings refers to your

mains-operated (corded) power tool or battery-operated

(cordless) power tool.

Work area safety

1. Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

2. Do not operate power tools in explosive atmo-

spheres, such as in the presence of ammable

liquids, gases or dust.Powertoolscreatesparks

which may ignite the dust or fumes.

3. Keep children and bystanders away while

operating a power tool. Distractions can cause

you to lose control.

Electrical Safety

1. Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power

tools. Unmodiedplugsandmatchingoutletswill

reduce risk of electric shock.

2. Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators. There is an increased risk of elec-

tric shock if your body is earthed or grounded.

3. Do not expose power tools to rain or wet con-

ditions.Waterenteringapowertoolwillincrease

the risk of electric shock.

4. Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges

or moving parts. Damaged or entangled cords

increase the risk of electric shock.

When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of a cord

suitable for outdoor use reduces the risk of electric shock.

6. If operating a power tool in a damp location

is unavoidable, use a residual current device

(RCD) protected supply. Use of an RCD reduces

the risk of electric shock.

7. Use of power supply via an RCD with a rated

residual current of 30 mA or less is always

recommended.

Power tools can produce electromagnetic elds

(EMF) that are not harmful to the user. However,

users of pacemakers and other similar medical

devices should contact the maker of their device and/

or doctor for advice before operating this power tool.

9. Do not touch the power plug with wet hands.

10. If the cord is damaged, have it replaced by the

manufacturer or his agent in order to avoid a

safety hazard.

Personal Safety

1. Stay alert, watch what you are doing and use

common sense when operating a power tool.

Do not use a power tool while you are tired or

under the inuence of drugs, alcohol or med-

ication. A moment of inattention while operating

powertoolsmayresultinseriouspersonalinjury.

2. Use personal protective equipment. Always

wear eye protection.Protectiveequipmentsuch

as a dust mask, non-skid safety shoes, hard hat or

hearing protection used for appropriate conditions

willreducepersonalinjuries.

3. Prevent unintentional starting. Ensure the

switch is in the off-position before connecting

to power source and/or battery pack, picking

up or carrying the tool. Carrying power tools with

yourngerontheswitchorenergisingpowertools

that have the switch on invites accidents.

4. Remove any adjusting key or wrench before

turning the power tool on. A wrench or a key left

attached to a rotating part of the power tool may

resultinpersonalinjury.

5. Do not overreach. Keep proper footing and

balance at all times. This enables better control

of the power tool in unexpected situations.

6. Dress properly. Do not wear loose clothing or

jewellery. Keep your hair and clothing away

from moving parts.Looseclothes,jewelleryor

long hair can be caught in moving parts.

7. If devices are provided for the connection of

dust extraction and collection facilities, ensure

these are connected and properly used. Use of

dust collection can reduce dust-related hazards.

8. Do not let familiarity gained from frequent use

of tools allow you to become complacent and

ignore tool safety principles. A careless action

cancausesevereinjurywithinafractionofa

second.

9. Always wear protective goggles to protect

your eyes from injury when using power tools.

The goggles must comply with ANSI Z87.1 in

the USA, EN 166 in Europe, or AS/NZS 1336

in Australia/New Zealand. In Australia/New

Zealand, it is legally required to wear a face

shield to protect your face, too.

It is an employer's responsibility to enforce

the use of appropriate safety protective equip-

ments by the tool operators and by other per-

sons in the immediate working area.

Product specificaties

Merk:	Makita
Categorie:	Zaagmachine
Model:	HS7611J
Kleur van het product:	Black, Blue
Gewicht:	3900 g
Breedte:	240 mm
Diepte:	311 mm
Hoogte:	261 mm
Snoerlengte:	2.5 m
Stroombron:	AC
Input vermogen:	1600 W
Stationair toerental (max):	5500 RPM
Geluidsdrukniveau:	95 dB
Geluidsniveau onzekerheid:	3 dB
Mes doorsnede:	190 mm
Snij-diepte (90º):	65 mm
Saw blade included:	Ja
Inclusief moersleutel:	Ja
Snij-diepte (45º):	45 mm
Asgat:	30 mm
Geluidsvermogensniveau:	106 dB
Type moersleutel:	Zeskantsleutel