Makita GA9020KD Handleiding

Makita Slijpmachine GA9020KD

Lees hieronder de 📖 handleiding in het Nederlandse voor Makita GA9020KD (16 pagina's) in de categorie Slijpmachine. Deze handleiding was nuttig voor 17 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/16
1
ENGLISH (Original instructions)
INSTRUCTION MANUAL
DOUBLE INSULATION
IMPORTANT: Read Before Using.
Angle Grinder
GA7020
GA7020S
GA7021
GA9020
GA9020S
010853
2
ENGLISH (Original instructions)
SPECIFICATIONS
Model GA7020 GA7020S GA7021 GA9020 GA9020S
Depressed center wheel diameter 180 mm 180 mm 230 mm
Max. wheel thickness 6.5 mm 6.5 mm 6.5 mm 6.5 mm 6.5 mm
Spindle thread M14 or 5/8"
(country specific)
M14 or 5/8"
(country specific)
M14 or 5/8"
(country specific)
Rated speed (n) / No load speed (n
0) 8,500 min-1 6,600 min-1 6,600 min-1
Overall length 473 mm 473 mm 473 mm
Net weight 5.5 kg 5.7 kg 5.5 kg 5.8 kg 5.9 kg
Safety class /II
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
END202-7
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
ï½¥ Read instruction manual.
ï½¥ DOUBLE INSULATION
ï½¥ Wear safety glasses.
ï½¥ Only for EU countries
Do not dispose of electric equipment
together with household waste
material!
In observance of European Directive
2012/19/EU on waste electric and
electronic equipment and its
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an environmentally compatible
recycling facility.
ENE048-1
Intended use
The tool is intended for grinding, sanding and cutting of
metal and stone materials without the use of water.
ENF002-2
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
ENF100-1
For public low-voltage distribution systems of
between 220 V and 250 V.
Switching operations of electric apparatus cause voltage
fluctuations. The operation of this device under unfavorable
mains conditions can have adverse effects to the operation
of other equipment. With a mains impedance equal or less
than 0.27 Ohms it can be presumed that there will be no
negative effects. The mains socket used for this device must
be protected with a fuse or protective circuit breaker having
slow tripping characteristics.
ENG905-1
Noise
The typical A-weighted noise level determined
according to EN60745:
Sound pressure level (L
pA) : 89 dB (A)
Sound power level (L
WA) : 100 dB (A)
Uncertainty (K) : 3 dB (A)
Wear ear protection
ENG900-1
Vibration
The vibration total value (tri-axial vector sum)
determined according to EN60745:
Model GA7020,GA7020S
Work mode : surface grinding with normal side
grip
Vibration emission (ah,AG) : 8.5 m/s2
Uncertainty (K) : 1.5 m/s2
Work mode : surface grinding with anti vibration
side grip
Vibration emission (ah,AG) : 8.0 m/s2
Uncertainty (K) : 1.5 m/s2
3
Work mode : disc sanding
Vibration emission (ah,DS) : 2.5 m/s2
Uncertainty (K) : 1.5 m/s
2
Model GA7021
Work mode : surface grinding with normal side
grip
Vibration emission (ah,AG
) : 5.0 m/s2
Uncertainty (K) : 1.5 m/s
2
Work mode : surface grinding with anti vibration
side grip
Vibration emission (ah,AG
) : 4.5 m/s2
Uncertainty (K) : 1.5 m/s
2
Work mode: disc sanding
Vibration emission (ah,DS) : 2.5 m/s2 or less
Uncertainty (K) : 1.5 m/s
2
Model GA9020,GA9020S
Work mode : surface grinding
Vibration emission (ah,AG
) : 5.5 m/s2
Uncertainty (K) : 1.5 m/s
2
Work mode: disc sanding
Vibration emission (ah,DS) : 2.5 m/s2 or less
Uncertainty (K) : 1.5 m/s
2
ENG902-1
• The declared vibration emission value has been
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
• The declared vibration emission value is used for
main applications of the power tool. However if the
power tool is used for other applications, the
vibration emission value may be different.
WARNING:
• The vibration emission during actual use of the
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
• Be sure to identify safety measures to protect the
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
ENH101-17
For European countries only
EC Declaration of Conformity
Makita declares that the following Machine(s):
Designation of Machine:
Angle Grinder
Model No./ Type: GA7020, GA7020S, GA7021, GA9020,
GA9020S
Conforms to the following European Directives:
2006/42/EC
They are manufactured in accordance with the following
standard or standardized documents:
EN60745
The technical file in accordance with 2006/42/EC is
available from:
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
31.12.2013
000331
Yasushi Fukaya
Director
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
GEA005-3
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.

Product specificaties

Merk: Makita
Categorie: Slijpmachine
Model: GA9020KD

Heb je hulp nodig?

Als je hulp nodig hebt met Makita GA9020KD stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Slijpmachine Makita

Makita

Makita 9558PB Handleiding

23 November 2024
Makita

Makita JS3201 Handleiding

27 Mei 2024
Makita

Makita JN3201 Handleiding

27 Mei 2024
Makita

Makita BO4566 Handleiding

21 Februari 2024
Makita

Makita BBO180 Handleiding

21 Februari 2024
Makita

Makita 9557NB Handleiding

21 Februari 2024
Makita

Makita 9558HNR Handleiding

21 Februari 2024
Makita

Makita DBO484 Handleiding

21 Februari 2024
Makita

Makita CE002G Handleiding

21 Februari 2024
Makita

Makita 9057SF Handleiding

20 Juni 2023

Handleiding Slijpmachine

Nieuwste handleidingen voor Slijpmachine

Bosch

Bosch GWS 18V-11 Professional Handleiding

10 December 2024
Bavaria

Bavaria BAG 115 Handleiding

5 December 2024
Einhell

Einhell YPL 2000 Handleiding

4 December 2024
Einhell

Einhell YPL 880 Handleiding

4 December 2024
Bosch

Bosch GWS 850 Professional Handleiding

22 November 2024
Tryton

Tryton TMT810 Handleiding

19 November 2024
Proviel

Proviel HWS 230/5 Handleiding

19 November 2024
Bavaria By Einhell

Bavaria By Einhell BWS 125/850-1 Handleiding

19 November 2024
Bavaria By Einhell

Bavaria By Einhell BWS 230/3 Handleiding

19 November 2024
Cleco

Cleco 10L2565-01 Handleiding

19 November 2024