Makita EY2650H25H Handleiding

Makita Zaagmachine EY2650H25H

Lees hieronder de 📖 handleiding in het Nederlandse voor Makita EY2650H25H (28 pagina's) in de categorie Zaagmachine. Deze handleiding was nuttig voor 97 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/28
Telescopic Petrol Pole Saw
EY2650H
Original Instruction Manual
INSTRUCTION MANUAL
EY2650H
WARNING:
Read this instruction manual carefully before putting the Telescopic Petrol Pole Saw into operation and
strictly observe the safety regulations!
Save instruction manual for future reference.
2
Thank you very much for purchasing the MAKITA Telescopic Petrol Pole Saw.
We are pleased to recommend to you the MAKITA Telescopic Petrol Pole
Saw which is the result of a long development programme and many years of
knowledge and experience.
Please read this booklet which refers in detail to the various points that will
demonstrate its outstanding performance. This will assist you to obtain the best
possible result from your MAKITA Telescopic Petrol Pole Saw.
You will note the following symbols when reading the instructions manual.
Read instruction manual and follow the
warnings and safety precautions! No open flame!
Take particular care and attention! Chain oil.
Wear protective helmet, eye and ear
protection.
Keep the area of operation clear of all
persons and pets!
Protective gloves must be worn! Fuel (Gasoline)
Wear sturdy boots with non-slip soles. Engine-manual start
Keep a distance of at least 15 m (50 ft)
between the equipment and bystanders
and/or electrical line (including any
branches contacting it). Risk of electrical
shock and/or personal injury.
First Aid
Never hold the pole saw at an angle of
more than 60°. ON/START
Chain speed. OFF/STOP
Forbidden! Emergency stop
No smoking!
English (Original instructions)
Table of Contents Page
Symbols .........................................................................2
Safety instructions .........................................................3
Technical data................................................................9
Designation of parts.....................................................10
Assembly and adjustment ........................................... 11
Before start of operation ..............................................14
Points in operation and how to stop ............................16
Operation .....................................................................18
Servicing instructions...................................................18
Storage ........................................................................24
3
General instructions
To ensure correct operation, user has to read this instruction manual to -
make himself familiar with the handling of the equipment. Users insufciently
informed will risk danger to themselves as well as others due to improper
handling.
It is recommended only to lend the equipment to people who have proven to -
be experienced with equipment.
Always hand over the instruction manual.
First users should ask the dealer for basic instructions to familiarize oneself -
with the handling of an engine powered cutter.
Children and young persons aged under 18 years must not be allowed to -
operate the equipment. Persons over the age of 16 years may however use
the device for the purpose of being trained only whilst under supervision of a
qualied trainer.
Use the equipment with the utmost care and attention. -
Operate the equipment only if you are in good physical condition. Perform all -
work calmly and carefully. The user has to accept liability for others.
Never use the equipment after consumption of alcohol or drugs, or if feeling -
tired or ill.
Never attempt to modify the equipment. -
National regulations may restrict of the use of the equipment. Follow the -
regulations about handling of pole saws and chain saws in your country.
Intended use of the machine
This equipment is designed only for the purpose of pruning branches and limbs
less than 15 cm in diameter. Never use the equipment for the other purpose.
Abusing the equipment may cause serious injury.
Personal protective equipment
The clothing worn should be functional and appropriate, i.e. it should be tight- -
tting but not cause hindrance. Do not wear either jewelry or clothing which
could become entangled with bushes or shrubs.
In order to avoid either head-, eye-, hand-or foot injuries as well as to protect -
your hearing the following protective equipment and protective clothing must
be used during operation.
Always wear a helmet where there is a risk of falling objects. The protective -
helmet (1) is to be checked at regular intervals for damage and is to be
replaced at the latest after 5 years. Use only approved protective helmets.
The visor (2) of the helmet (or alternatively goggles) protects the face from -
flying debris and stones. During operation always wear goggles, or a visor to
prevent eye injuries.
Wear adequate noise protection equipment to avoid hearing impairment (ear -
muffs (3), ear plugs etc.).
The work overalls (4) protect against flying stones and debris. -
We strongly recommend that the user wears work overalls.
Special gloves (5) made of thick leather are part of the prescribed equipment -
and must always be worn during operation.
When using the equipment, always wear sturdy shoes (6) with a non-slip -
sole. This protects against injuries and ensures a good footing.
When handling the saw chain or adjusting the chain tension, wear protective -
gloves. Saw chain can cut bare hands severely.

Product specificaties

Merk: Makita
Categorie: Zaagmachine
Model: EY2650H25H

Heb je hulp nodig?

Als je hulp nodig hebt met Makita EY2650H25H stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Zaagmachine Makita

Makita

Makita DJR187ZK Handleiding

2 December 2024
Makita

Makita BSS610 Handleiding

21 Februari 2024
Makita

Makita DLM463Z Handleiding

8 Juli 2023
Makita

Makita LS800D Handleiding

28 Juni 2023
Makita

Makita UC4020A Handleiding

20 Juni 2023
Makita

Makita 5008MGJ Handleiding

20 Juni 2023
Makita

Makita DLM465Z Handleiding

19 Juni 2023
Makita

Makita DPB180RTE Handleiding

17 Juni 2023
Makita

Makita JR3051T Handleiding

9 Juni 2023
Makita

Makita EA3500F Handleiding

7 Juni 2023

Handleiding Zaagmachine

Nieuwste handleidingen voor Zaagmachine

Anova

Anova E60CS Handleiding

20 December 2024
Silverline

Silverline 447132 Handleiding

19 December 2024
Silverline

Silverline 427644 Handleiding

19 December 2024
Herkules

Herkules KS 210 Profi Handleiding

17 December 2024
Total

Total TS730301 Handleiding

16 December 2024
Total

Total TJSLI8501 Handleiding

16 December 2024
Turbo-Silent

Turbo-Silent EKS 2040/1 Handleiding

16 December 2024
Bavaria

Bavaria BJS 400 Handleiding

5 December 2024
Bavaria

Bavaria BCS 64/1 Handleiding

5 December 2024
Bavaria

Bavaria BEC 2040 TC Handleiding

5 December 2024