Makita EK8100 Handleiding

Makita Zaagmachine EK8100

Lees hieronder de 📖 handleiding in het Nederlandse voor Makita EK8100 (32 pagina's) in de categorie Zaagmachine. Deze handleiding was nuttig voor 109 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/32
Important:
Read this instruction manual carefully before putting the Power Cut into operation and strictly observe the
safety regulations!
Keep this instruction manual!
Instruction Manual
Original Instruction Manual
EK7300
EK7301
EK8100
2
Table of contents Page
Packing ................................................................................ 2
Delivery inventory .............................................................. 3
Symbols ...............................................................................3
SAFETY PRECAUTIONS
Intended use ................................................................... 4
General precautions ....................................................... 4
Protective equipment ...................................................4-5
Fuels / Refuelling ............................................................5
Putting into operation ...................................................... 5
Cutting discs ................................................................... 6
Kickback and lock-in ....................................................... 7
Working behavior / Method of working ............................ 7
Always observe the following when using
synthetic resin cutting discs ............................................. 8
Cutting metal ...................................................................8
Cutting masonry and concrete .....................................8-9
Transport and storage ..................................................... 9
Maintenance ................................................................. 10
First aid ......................................................................... 10
Disposal and environmental protection .........................10
Technical data ................................................................... 11
Denomination of components ......................................... 12
PUTTING INTO OPERATION
Mounting the cutting disc ............................................... 13
Tightening the V-belt / Checking V-belt tension ............ 14
Fuels / Refuelling .....................................................14-15
Starting the engine ........................................................16
Cold-starting .................................................................17
Warm-starting ............................................................... 17
Stop engine ...................................................................17
Adjusting the carburetor .................................................. 18
MAINTENANCE
Changing the V-belt ...................................................... 19
Cleaning the protection hood ........................................ 20
Cleaning / changing the air Þ lter ..............................20-21
Replacing the spark plug .............................................. 22
Replacing the suction head ..........................................22
Replacing the starter cable ........................................... 23
Replacing the return spring ...........................................24
Replacing / cleaning the spark arrester screen .............26
Instructions for periodic maintenance ........................... 28
Cutting attachment in central / side position ................. 25
Repositioning the cutting attachment ....................... 25-26
SPECIAL ACCESSORIES
Diamond cutting discs, trolley, water tank
and pressure water system ............................................27
Service, spare parts and guarantee ................................ 28
Troubleshooting ...............................................................29
Extract from spare parts list .......................................30-31
Accessories ..................................................................31
Packing
Your MAKITA Power Cut is packed in a cardboard box to pr e-
vent shipping damage.
Cardboard is a basic raw material and is consequently reuseable
or suitable for recycling (waste paper recycling).
Thank you for purchasing a MAKITA product!
Congratulations on choosing a MAKITA Power Cut cutoff saw!
We are conÞ dent that you will be satisÞ ed with this modern
piece of equipment. Like our chain saws, the MAKITA Power
Cuts feature specially designed high-performance engines
with outstanding power-to-weight ratios, for heavy-duty yet
lightweight tools.
Other advantages of the MAKITA Power Cuts:
• Sturdy construction and high reliability.
• Maintenance-free electronic ignition, hermetically sealed to
protect against dust and moisture.
• Vibration damping with the MAKITA 2-mass system (D2M) for
tireless working even when guiding the Power Cut by hand.
• Five-stage air-Þ lter system for reliable working even under
very dusty conditions.
• Two options for mounting the cutter attachment: Either cen-
trally, for good balance when guiding the unit manually, or on
the side, for ß ush cuts along walls or curbsides or horizontally
directly above the ground.
• Extensive range of resin-bonded and diamond grit cutting
discs, trolley with dust catcher, and systems for supplying
water to the disc.
The following industrial property rights apply: US 08510690,
SE 95027298, SE 95027306, IT 95000653, IT 95000654, GBM
9412558, GBM 9412559.
We want you to be satisÞ ed with your MAKITA product.
In order to guarantee the optimal function and performance of
your Power Cut and to ensure your personal safety we would
request you to perform the following:
Read this instruction manual carefully before putting the
Power Cut into operation for the Þ rst time, and strictly
observe the safety regulations! Failure to observe these
precautions can lead to severe injury or death!
EU Conformity Declaration
The undersigned, Tom as authorized by oyasu Kato, MAKITA
Corporation, declare that the MAKITA machines,
Type: 395, 328
Power Cut EK7300, EK7301 ( EK8100395), (328)
manufactured by MAKITA Corporation, 3-11-8 Sumiyoshi-Cho,
Anjo, Aichi, 446-8502 Japan, conforms to the basic safety and
health requirements of the applicable EU Directives:
EU Machinery Directive 2006/42/EG, EU EMC Directive
2004/108/ EG, Outdoor Noise Directive 2000/14/EG.
The most important standards applied to properly meet the re-
quirements of the above EU Directive were: EN 19432, CISPR
12, EN ISO 14982, DIN EN 61000-4. The conformity assess-
ment procedure 2000/14/EG was performed per Annex V. The
measured noise level (Lwa) is 114 dB(A). The guaranteed noise
level (Ld) is 115 dB(A).
The technical documentation is on Þ le at MAKITA International
Europe Ltd., Michigan Drive, Tongwell, Milton Keynes, Bucks,
MK15 8JD, England.
Anjo, 1.10.2012 for MAKITA Corporation
Tomoyasu Kato
Managing Director
3
6 5 4 3 2 1
Delivery inventory
1. Power Cut
2. Cutting disc (not in the general scope of delivery. Country-speciÞ c)
3. Adapter ring 20/25.4 (not in the general scope of delivery. Country-speciÞ c)
4. Screwdriver (for carburetor adjustment)
5. Offset screwdriver
6. Universal wrench 13/19
7. Instruction manual (not shown)
In case one of the parts listed should not be included in the
delivery inventory, please consult your sales agent.
Symbols
You will notice the following symbols on the Power Cut and in the Instruction Manual:
Read instruction manual and
follow the warning- and safety
precautions!
Particular care and caution!
Forbidden!
Wear helmet and eye, respiratory
and hearing protection!
Wear protective gloves!
Wear respiratory protection!
Hazardous dust and/or
gas emission!
Fire hazard from ß ying sparks!
No smoking!
No open Þ re!
Direction of cutting wheel rotation
Warning: the max. peripheral
speed of the cutting disc is 80 m/s!
Cutting disc dimensions
Never use circular saw blades!
Never use damaged cutting discs!
Combination switch
Choke, Start/Stop (I/O)
Starting procedure
(Press decompression valve,
Engine - manual start)
Stop engine!
Warning!
Kickback!
Fuel and oil mixture
First aid
Recycling
CE - Marking

Product specificaties

Merk: Makita
Categorie: Zaagmachine
Model: EK8100

Heb je hulp nodig?

Als je hulp nodig hebt met Makita EK8100 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Zaagmachine Makita

Makita

Makita DJR187ZK Handleiding

2 December 2024
Makita

Makita BSS610 Handleiding

21 Februari 2024
Makita

Makita DLM463Z Handleiding

8 Juli 2023
Makita

Makita LS800D Handleiding

28 Juni 2023
Makita

Makita UC4020A Handleiding

20 Juni 2023
Makita

Makita 5008MGJ Handleiding

20 Juni 2023
Makita

Makita DLM465Z Handleiding

19 Juni 2023
Makita

Makita DPB180RTE Handleiding

17 Juni 2023
Makita

Makita JR3051T Handleiding

9 Juni 2023
Makita

Makita EA3500F Handleiding

7 Juni 2023

Handleiding Zaagmachine

Nieuwste handleidingen voor Zaagmachine

Anova

Anova E60CS Handleiding

20 December 2024
Silverline

Silverline 447132 Handleiding

19 December 2024
Silverline

Silverline 427644 Handleiding

19 December 2024
Herkules

Herkules KS 210 Profi Handleiding

17 December 2024
Total

Total TS730301 Handleiding

16 December 2024
Total

Total TJSLI8501 Handleiding

16 December 2024
Turbo-Silent

Turbo-Silent EKS 2040/1 Handleiding

16 December 2024
Bavaria

Bavaria BJS 400 Handleiding

5 December 2024
Bavaria

Bavaria BCS 64/1 Handleiding

5 December 2024
Bavaria

Bavaria BEC 2040 TC Handleiding

5 December 2024