Makita DUC254Z Handleiding

Makita Zaagmachine DUC254Z

Lees hieronder de 📖 handleiding in het Nederlandse voor Makita DUC254Z (24 pagina's) in de categorie Zaagmachine. Deze handleiding was nuttig voor 61 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/24

INSTRUCTION MANUAL

Cordless Chain Saw

DUC204

DUC254

DUC254C

ENGLISH: Original instructions

Read before use.

2 ENGLISH

SPECIFICATIONS

Model: DUC204 DUC254 DUC254C

Overall length (without guide bar) 256 mm

Rated voltage D.C. 18 V

Net weight 2.8 - 3.3 kg

Standard guide bar length 200 mm 250 mm

Recommended guide bar

length

with 90PX 200 - 250 mm -

with 91PX 250 mm- -

with 25AP 250 mm-

Applicable saw chain type

(refer to the table below)

90PX 90PX

91PX

25AP

Standard sprocket Number of teeth 6 9

Pitch 3/8″ 1/4″

Chain speed 0 - 24 m/s

(0 - 1,440 m/min)

0 - 22.5 m/s

(0 - 1,350 m/min)

Chain oil tank volume 140 cm

• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange

without notice.

• Specicationsmaydifferfromcountrytocountry.

• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-

est combination, according to EPTA-Procedure 01/2014, are shown in the table.

Applicable battery cartridge

BL1815N / BL1820 / BL1820B / BL1830 / BL1830B / BL1840 / BL1840B / BL1850 / BL1850B / BL1860B

• Some of the battery cartridges listed above may not be available depending on your region of residence.

WARNING: Only use the battery cartridges listed above. Use of any other battery cartridges may cause

injuryand/orre.

Saw chain, guide bar, and sprocket combination

Saw chain type 90PX

Number of drive links 33 40

Guide bar Guide bar length 200 mm 250 mm

Cutting length 180 mm 244 mm

Pitch 3/8″

Gauge 1.1 mm

Type Sprocket nose bar

Sprocket Number of teeth 6

Pitch 3/8″

Saw chain type 91PX

Number of drive links 40

Guide bar Guide bar length 250 mm

Cutting length 244 mm

Pitch 3/8″

Gauge 1.3 mm

Type Sprocket nose bar

Sprocket Number of teeth 6

Pitch 3/8″

3 ENGLISH

Saw chain type 25AP

Number of drive links 60

Guide bar Guide bar length 250 mm

Cutting length 250 mm

Pitch 1/4″

Gauge 1.3 mm

Type Carving bar

Sprocket Number of teeth 9

Pitch 1/4″

NOTICE: When using 25AP saw chain, use with Sprocket 9 (optional accessory).

WARNING:Useappropriatecombinationoftheguidebarandsawchain.Otherwisepersonalinjurymay

result.

Symbols

The following show the symbols used for the equipment. Be

sure that you understand their meaning before use.

Read instruction manual.

Wear safety glasses.

Wear ear protection.

Wear a helmet, goggles and ear protection.

Use appropriate protection for foot-leg and

hand-arm.

This saw is to be used by properly trained

operators only.

Do not expose to moisture.

Maximum permissible cut length

Always use two hands when operating the

chain saw.

Direction of chain travel

Sawchainoiladjustment

Ni-MH

Li-ion

Only for EU countries

Do not dispose of electric equipment or battery

pack together with household waste material!

In observance of the European Directives,

on Waste Electric and Electronic Equipment

and Batteries and Accumulators and Waste

Batteries and Accumulators and their implemen-

tation in accordance with national laws, electric

equipment and batteries and battery pack(s)

that have reached the end of their life must be

collected separately and returned to an environ-

mentally compatible recycling facility.

Intended use

The tool is intended for cutting branches and pruning

trees. It is also suitable for tree service.

Noise

The typical A-weighted noise level determined accord-

ing to IEC62841-4-1:

Model DUC204

Sound pressure level (L

pA) : 92.2 dB(A)

Sound power level (L

WA) : 103.2 dB (A)

Uncertainty (K) : 2.5 dB(A)

Model DUC254

Sound pressure level (L

pA) : 92.2 dB(A)

Sound power level (L

WA) : 103.2 dB (A)

Uncertainty (K) : 2.5 dB(A)

Model DUC254C

Sound pressure level (L

pA) : 92.2 dB(A)

Sound power level (L

WA) : 103.2 dB (A)

Uncertainty (K) : 2.5 dB(A)

WARNING: Wear ear protection.

Vibration

The vibration total value (tri-axial vector sum) deter-

mined according to IEC62841-4-1:

Model DUC204

Work mode: cutting wood

Vibration emission (a

h,W) : 3.1 m/s2

Uncertainty (K) : 1.5 m/s

Model DUC254

Work mode: cutting wood

Vibration emission (a

h,W) : 3.1 m/s2

Uncertainty (K) : 1.5 m/s

Model DUC254C

Work mode: cutting wood

Vibration emission (a

h,W) : 4.1 m/s2

Uncertainty (K) : 1.5 m/s

NOTE:

The declared vibration emission value has been

measured in accordance with the standard test method and

may be used for comparing one tool with another.

NOTE:

The declared vibration emission value may also be

used in a preliminary assessment of exposure.

Product specificaties

Merk:	Makita
Categorie:	Zaagmachine
Model:	DUC254Z
Kleur van het product:	Blauw
Stroombron:	Batterij/Accu
Stationair toerental:	- RPM
AC-ingangsspanning:	18 V
Type motor:	Borstelloos
Lemmet lengte:	482 mm
Chain snelheid:	24 m/s
Inhoud olietank:	0.14 l