Makita DUB363PG2V Handleiding
Makita
Bladblazer
DUB363PG2V
Lees hieronder de 📖 handleiding in het Nederlandse voor Makita DUB363PG2V (16 pagina's) in de categorie Bladblazer. Deze handleiding was nuttig voor 69 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/16
INSTRUCTION MANUAL
Cordless Blower
DUB363
ENGLISH: Original instructions
Read before use.
2 ENGLISH
SPECIFICATIONS
Model: DUB363
Capacities Air volume 0 - 13.4 m3/min
Air speed (average) 0 - 54 m/s
Air speed (max.) 0 - 65 m/s
Dimensions (L x W x H) *1 341 mm x 193 mm x 415 mm
Rated voltage D.C. 36 V
Net weight Blower *2 3.8 - 5.2 kg
Vacuum *3 6.0 - 6.6 kg
*1. Without pipes, nozzles, dust bag, shoulder strap, and battery cartridges.
*2.
With blower pipe, end nozzle and at nozzle, and without suction pipe, suction nozzle, elbow pipe, dust bag and shoulder strap.
*3.
With suction pipe, suction nozzle, elbow pipe, dust bag and shoulder strap, and without blower pipe, end nozzle and at nozzle.
• Due to our continuing program of research and development, the specications herein are subject to change
without notice.
• Specications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge
BL1815N / BL1820 / BL1820B / BL1830 / BL1830B / BL1840 / BL1840B / BL1850 / BL1850B / BL1860B
• Some of the battery cartridges listed above may not be available depending on your region of residence.
WARNING: Only use the battery cartridges listed above. Use of any other battery cartridges may cause
injury and/or î‚¿re.
Symbols
The followings show the symbols used for the equipment.
Be sure that you understand their meaning before use.
Take particular care and attention.
Read instruction manual.
Keep hands away from rotating parts.
Long hair may cause entanglement
accident.
Keep bystanders away.
Wear eye and ear protection.
Do not expose to moisture.
Ni-MH
Li-ion
Only for EU countries
Do not dispose of electric equipment or
battery pack together with household waste
material!
In observance of the European Directives,
on Waste Electric and Electronic
Equipment and Batteries and Accumulators
and Waste Batteries and Accumulators
and their implementation in accordance
with national laws, electric equipment and
batteries and battery pack(s) that have
reached the end of their life must be col-
lected separately and returned to an envi-
ronmentally compatible recycling facility.
Intended use
The machine is intended for blowing and vacuuming.
Noise
The typical A-weighted noise level determined accord-
ing to EN50636-2-100:
Sound pressure level (L
pA) : 84.8 dB(A)
Uncertainty (K) : 1.3 dB(A)
Sound power level (L
WA) : 94.9 dB (A)
Uncertainty (K) : 0.3 dB(A)
NOTE: The declared noise emission value(s) has
been measured in accordance with a standard test
method and may be used for comparing one tool with
another.
NOTE: The declared noise emission value(s)
may also be used in a preliminary assessment of
exposure.
WARNING: Wear ear protection.
WARNING: The noise emission during actual
use of the power tool can differ from the declared
value(s) depending on the ways in which the
tool is used especially what kind of workpiece is
processed.
WARNING: Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
off and when it is running idle in addition to the
trigger time).
3 ENGLISH
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN50636-2-100:
Work mode: operation without load (blowing)
Vibration emission (a
h) : 2.5 m/s2 or less
Uncertainty (K) : 1.5 m/s
2
Work mode: operation without load (vacuuming)
Vibration emission (a
h) : 2.5 m/s2 or less
Uncertainty (K) : 1.5 m/s
2
NOTE: The declared vibration total value(s) has been
measured in accordance with a standard test method
and may be used for comparing one tool with another.
NOTE: The declared vibration total value(s) may also
be used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual
use of the power tool can differ from the declared val-
ue(s) depending on the ways in which the tool is used
especially what kind of workpiece is processed.
WARNING:
Be sure to identify safety measures
to protect the operator that are based on an estima-
tion of exposure in the actual conditions of use (tak-
ing account of all parts of the operating cycle such
as the times when the tool is switched off and when
it is running idle in addition to the trigger time).
EC Declaration of Conformity
For European countries only
The EC declaration of conformity is included as Annex A
to this instruction manual.
SAFETY WARNINGS
Cordless Blower Safety Instructions
WARNING: Read all safety warnings and
all instructions. Failure to follow the warnings and
instructions may result in electric shock, î‚¿re and/or
serious injury.
Save all warnings and instruc-
tions for future reference.
Training
1. Read the instructions carefully. Be familiar
with the controls and the correct use of the
machine.
2. Never allow children, persons with reduced
physical, sensory or mental capabilities or
lack of experience and knowledge or people
unfamiliar with these instructions to use the
machine. Local regulations may restrict the
age of the operator.
3. Never operate the machine while people, espe-
cially children, or pets are nearby.
4. Keep in mind that the operator or user is
responsible for accidents or hazards occurring
to other people or their property.
Preparation
1. Always wear substantial footwear and long
trousers while operating the machine.
2. Do not wear loose clothing or jewellery that
can be drawn into the air inlet. Keep long hair
away from the air inlets.
3. Always wear protective goggles to protect
your eyes from injury when using power tools.
The goggles must comply with ANSI Z87.1 in
the USA, EN 166 in Europe, or AS/NZS 1336
in Australia/New Zealand. In Australia/New
Zealand, it is legally required to wear a face
shield to protect your face, too.
It is an employer's responsibility to enforce
the use of appropriate safety protective equip-
ments by the tool operators and by other per-
sons in the immediate working area.
4. To prevent dust irritation the wearing of a face
mask is recommended.
5. While operating the machine, always wear
non-slip and protective footwear. Non-skid,
closed-toed safety boots and shoes will reduce the
risk of injury.
6. Use personal protective equipment. Always
wear eye protection. Protective equipment such
as a dust mask, non-skid safety shoes, hard hat or
hearing protection used for appropriate conditions
will reduce personal injuries.
Operation
1. Switch off the machine and remove the battery
cartridge and make sure that all moving parts
have come to a complete stop
• whenever you leave the machine.
• before clearing blockages.
• before checking, cleaning or working on
the machine.
• if the machine starts to vibrate
abnormally.
• whenever you convert the machine from
blower to vacuum, and vice versa.
2. Operate the machine only in daylight or in
good artiî‚¿cial light.
3. Do not overreach and keep proper balance and
footing at all times.
4. Always be sure of your footing on slopes.
5. Walk, never run.
6. Keep all cooling air inlets clear of debris.
7. Never blow debris in the direction of
bystanders.
Product specificaties
| Merk: | Makita |
| Categorie: | Bladblazer |
| Model: | DUB363PG2V |
Heb je hulp nodig?
Als je hulp nodig hebt met Makita DUB363PG2V stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Bladblazer Makita
1 Juni 2023
29 Mei 2023
22 Mei 2023
18 Mei 2023
30 April 2023
28 April 2023
27 April 2023
26 April 2023
23 April 2023
20 April 2023
Handleiding Bladblazer
- Bladblazer Bosch
- Bladblazer Panasonic
- Bladblazer DeWalt
- Bladblazer Karcher
- Bladblazer WOLF-Garten
- Bladblazer Al-ko
- Bladblazer Alpina
- Bladblazer Atika
- Bladblazer Black Decker
- Bladblazer Brandson
- Bladblazer Dolmar
- Bladblazer Echo
- Bladblazer Einhell
- Bladblazer Eurogarden
- Bladblazer Farmer
- Bladblazer Ferrex
- Bladblazer Flex
- Bladblazer Florabest
- Bladblazer Flymo
- Bladblazer Fuxtec
- Bladblazer Gamma
- Bladblazer Garden Feelings
- Bladblazer Gardena
- Bladblazer Gardenline
- Bladblazer Gardol
- Bladblazer GBM
- Bladblazer GForce
- Bladblazer Global
- Bladblazer Greenworks
- Bladblazer Grizzly
- Bladblazer Gude
- Bladblazer Hikoki
- Bladblazer Hitachi
- Bladblazer Homelite
- Bladblazer Honda
- Bladblazer Husqvarna
- Bladblazer Hyundai
- Bladblazer Kibani
- Bladblazer Kress
- Bladblazer McCulloch
- Bladblazer Metabo
- Bladblazer Milwaukee
- Bladblazer Mr Gardener
- Bladblazer MTD
- Bladblazer Parkside
- Bladblazer Pattfield
- Bladblazer Powerplus
- Bladblazer Powertec Garden
- Bladblazer Remington
- Bladblazer Robust
- Bladblazer Ryobi
- Bladblazer Scheppach
- Bladblazer Skil
- Bladblazer Solo
- Bladblazer Stanley
- Bladblazer Stiga
- Bladblazer Stihl
- Bladblazer Tanaka
- Bladblazer Tesco
- Bladblazer Texas
- Bladblazer Toledo
- Bladblazer Top Garden
- Bladblazer Topcraft
- Bladblazer Toro
- Bladblazer Troy-Bilt
- Bladblazer Varo
- Bladblazer Vonroc
- Bladblazer Westfalia
- Bladblazer Worx
- Bladblazer Ozito
- Bladblazer Black And Decker
- Bladblazer Cocraft
- Bladblazer Meec Tools
- Bladblazer Hilti
- Bladblazer Cobra
- Bladblazer Cotech
- Bladblazer Truper
- Bladblazer Fieldmann
- Bladblazer McGregor
- Bladblazer Prime3
- Bladblazer Sun Joe
- Bladblazer Yard Force
- Bladblazer Cramer
- Bladblazer EGO
- Bladblazer Grouw
- Bladblazer Maruyama
- Bladblazer Sovereign
- Bladblazer Spear & Jackson
- Bladblazer Tryton
- Bladblazer Powerworks
- Bladblazer Craftsman
- Bladblazer Verto
- Bladblazer Zenoah-Komatsu
- Bladblazer Snow Joe
- Bladblazer Yato
- Bladblazer Jonsered
- Bladblazer Bestgreen
- Bladblazer Baumr-AG
- Bladblazer IKRA
- Bladblazer MTM
- Bladblazer Arebos
- Bladblazer Anova
- Bladblazer Massimo
- Bladblazer Prowork
- Bladblazer LawnMaster
- Bladblazer Bahr
Nieuwste handleidingen voor Bladblazer
19 November 2024
19 November 2024
17 November 2024
17 November 2024
16 November 2024
16 November 2024
14 November 2024
5 November 2024
3 November 2024
3 November 2024