Makita DUB185Z Handleiding

Makita Bladblazer DUB185Z

Lees hieronder de 📖 handleiding in het Nederlandse voor Makita DUB185Z (12 pagina's) in de categorie Bladblazer. Deze handleiding was nuttig voor 16 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/12

INSTRUCTION MANUAL

Cordless Blower

DUB185

DUB186

ENGLISH: Original instructions

Read before use.

2 ENGLISH

SPECIFICATIONS

Model: DUB185 DUB186

Capacities Air volume 0 - 3.2 m3/min

Air speed (average) 0 - 81 m/s 0 - 56 m/s

Air speed (max.) 0 - 98 m/s 0 - 68 m/s

Overall length 517 mm *1 861 mm *2

Rated voltage D.C. 18 V

Net weight With nozzle 1.6 - 2.1 kg -

With garden nozzle 1.6 - 2.1 kg-

*1. With nozzle and battery cartridge, and without dust bag.

*2. With garden nozzle and battery cartridge, and without dust bag.

•

Due to our continuing program of research and development, the specications herein are subject to change without notice.

• Specications may dier from country to country.

• The weight may dier depending on the attachment(s), including the battery cartridge. The lightest and heavi-

est combination, according to EPTA-Procedure 01/2014, are shown in the table.

Applicable battery cartridge and charger

Battery cartridge BL1815N / BL1820 / BL1820B / BL1830 / BL1830B / BL1840 /

BL1840B / BL1850 / BL1850B / BL1860B

Charger DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /

DC18SH

•

Some of the battery cartridges and chargers listed above may not be available depending on your region of residence.

WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridges

and chargers may cause injury and/or re.

Recommended battery adapter

Battery adapter PDC01

• The battery adapter(s) listed above may not be available depending on your region of residence.

• Before using the battery adapter, read instruction and cautionary markings on the battery adapter.

Symbols

The followings show the symbols which may be used

for the equipment. Be sure that you understand their

meaning before use.

Take particular care and attention.

Read instruction manual.

Keep hands away from rotating parts.

Long hair may cause entanglement

accident.

Keep bystanders away.

Wear eye and ear protection.

Do not expose to moisture.

Ni-MH

Li-ion

Only for EU countries

Do not dispose of electric equipment or battery

pack together with household waste material!

In observance of the European Directives,

on Waste Electric and Electronic

Equipment and Batteries and Accumulators

and Waste Batteries and Accumulators

and their implementation in accordance

with national laws, electric equipment and

batteries and battery pack(s) that have

reached the end of their life must be col-

lected separately and returned to an envi-

ronmentally compatible recycling facility.

Intended use

The machine is intended for blowing and vacuuming.

Noise

The typical A-weighted noise level determined accord-

ing to EN62841-1:

Model DUB185

Sound pressure level (L

pA) : 83 dB(A)

Sound power level (L

WA) : 94 dB (A)

Uncertainty (K) : 3 dB(A)

The typical A-weighted noise level determined accord-

ing to EN50636-2-100:

3 ENGLISH

Model DUB186

Sound pressure level (L

pA) : 82.5 dB(A)

Uncertainty (K) : 2.3 dB(A)

Sound power level (L

WA) : 92.4 dB (A)

Uncertainty (K) : 2.8 dB(A)

NOTE:

The declared noise emission value(s) has been

measured in accordance with a standard test method

and may be used for comparing one tool with another.

NOTE:

The declared noise emission value(s) may

also be used in a preliminary assessment of exposure.

WARNING: Wear ear protection.

WARNING:

The noise emission during actual

use of the power tool can dier from the declared val-

ue(s) depending on the ways in which the tool is used

especially what kind of workpiece is processed.

WARNING: Be sure to identify safety mea-

sures to protect the operator that are based on an

estimation of exposure in the actual conditions of

use (taking account of all parts of the operating

cycle such as the times when the tool is switched

o and when it is running idle in addition to the

trigger time).

Vibration

The vibration total value (tri-axial vector sum) deter-

mined according to EN62841-1:

Model DUB185

Work mode: operation without load

Vibration emission (a

h) : 2.5 m/s2 or less

Uncertainty (K) : 1.5 m/s

The vibration total value (tri-axial vector sum) deter-

mined according to EN50636-2-100:

Model DUB186

Work mode: operation without load

Vibration emission (a

h) : 2.5 m/s2 or less

Uncertainty (K) : 1.5 m/s

NOTE: The declared vibration total value(s) has been

measured in accordance with a standard test method

and may be used for comparing one tool with another.

NOTE: The declared vibration total value(s) may also

be used in a preliminary assessment of exposure.

WARNING: The vibration emission during

actual use of the power tool can dier from the

declared value(s) depending on the ways in which

the tool is used especially what kind of workpiece

is processed.

WARNING: Be sure to identify safety mea-

sures to protect the operator that are based on an

estimation of exposure in the actual conditions of

use (taking account of all parts of the operating

cycle such as the times when the tool is switched

o and when it is running idle in addition to the

trigger time).

EC Declaration of Conformity

For European countries only

The EC declaration of conformity is included as Annex A

to this instruction manual.

SAFETY WARNINGS

General power tool safety warnings

WARNING:

Read all safety warnings, instruc-

tions, illustrations and specications provided with this

power tool. Failure to follow all instructions listed below

may result in electric shock, re and/or serious injury.

Save all warnings and instruc-

tions for future reference.

The term "power tool" in the warnings refers to your mains-oper-

ated (corded) power tool or battery-operated (cordless) power tool.

Work area safety

1. Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

2. Do not operate power tools in explosive atmo-

spheres, such as in the presence of ammable

liquids, gases or dust. Power tools create sparks

which may ignite the dust or fumes.

3. Keep children and bystanders away while

operating a power tool. Distractions can cause

you to lose control.

Electrical safety

Power tool plugs must match the outlet. Never modify

the plug in any way. Do not use any adapter plugs with

earthed (grounded) power tools. Unmodied plugs and

matching outlets will reduce risk of electric shock.

2. Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators. There is an increased risk of elec-

tric shock if your body is earthed or grounded.

3. Do not expose power tools to rain or wet con-

ditions. Water entering a power tool will increase

the risk of electric shock.

Do not abuse the cord. Never use the cord for carrying,

pulling or unplugging the power tool. Keep cord away

from heat, oil, sharp edges or moving parts. Damaged

or entangled cords increase the risk of electric shock.

When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of a cord

suitable for outdoor use reduces the risk of electric shock.

If operating a power tool in a damp location is unavoid-

able, use a residual current device (RCD) protected

supply. Use of an RCD reduces the risk of electric shock.

Power tools can produce electromagnetic elds

(EMF) that are not harmful to the user. However,

users of pacemakers and other similar medical

devices should contact the maker of their device and/

or doctor for advice before operating this power tool.

Personal safety

1. Stay alert, watch what you are doing and use

common sense when operating a power tool.

Do not use a power tool while you are tired or

under the inuence of drugs, alcohol or med-

ication. A moment of inattention while operating

power tools may result in serious personal injury.

Use personal protective equipment. Always wear eye

protection. Protective equipment such as a dust mask,

non-skid safety shoes, hard hat or hearing protection used

for appropriate conditions will reduce personal injuries.

Product specificaties

Merk:	Makita
Categorie:	Bladblazer
Model:	DUB185Z
Kleur van het product:	Black, Blue
Breedte:	156 mm
Diepte:	517 mm
Hoogte:	210 mm
Soort:	Draagbare blazer
Accu/Batterij voltage:	18 V
Soft grip:	Ja
Werkingstechnologie:	Electrisch
Zuig capaciteit:	192 m³/uur