Makita DTM52Z Handleiding

Makita Multitool DTM52Z

Lees hieronder de 📖 handleiding in het Nederlandse voor Makita DTM52Z (34 pagina's) in de categorie Multitool. Deze handleiding was nuttig voor 18 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/34

INSTRUCTION MANUAL

Cordless Multi Tool

DTM52

ENGLISH: Original instructions

Read before use.

2 ENGLISH

SPECIFICATIONS

Model: DTM52

Oscillation per minute 10,000 - 20,000 min

-1

Oscillation angle, left/right 1.8° (3.6° total)

Overall length with BL1820B 305 mm

with BL1860B 322 mm

Net weight 1.7 - 2.0 kg

Rated voltage D.C. 18 V

•

Due to our continuing program of research and development, the specications herein are subject to change without notice.

• Specications may dier from country to country.

• The weight may dier depending on the attachment(s), including the battery cartridge. The lightest and heavi-

est combination, according to EPTA-Procedure 01/2014, are shown in the table.

Applicable battery cartridge and charger

Battery cartridge BL1815N / BL1820B / BL1830B / BL1840B / BL1850B / BL1860B

Charger DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /

DC18SH

•

Some of the battery cartridges and chargers listed above may not be available depending on your region of residence.

WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridges

and chargers may cause injury and/or re.

Applicable application tool

Use the application tool which type is adaptable to this

tool as shown in the following table.

OIS

STARLOCK PLUS

STARLOCK

STARLOCK MAX

Symbols

The followings show the symbols which may be used

for the equipment. Be sure that you understand their

meaning before use.

Read instruction manual.

Wear safety glasses.

Ni-MH

Li-ion

Only for EU countries

Do not dispose of electric equipment or

battery pack together with household waste

material!

In observance of the European Directives,

on Waste Electric and Electronic

Equipment and Batteries and Accumulators

and Waste Batteries and Accumulators

and their implementation in accordance

with national laws, electric equipment and

batteries and battery pack(s) that have

reached the end of their life must be col-

lected separately and returned to an envi-

ronmentally compatible recycling facility.

Intended use

The tool is intended for sawing and cutting wood,

plastic, gypsum, non-ferrous metals, and fastening

elements (e.g. nails and staples). It is also intended for

working soft wall tiles, as well as dry sanding and scrap-

ing of small surfaces. It is especially for working close to

edge and ush cutting.

Noise

The typical A-weighted noise level determined accord-

ing to EN62841-2-4:

Work mode: Sanding

Sound pressure level (L

pA) : 69 dB(A)

Uncertainty (K) : 3 dB(A)

The noise level under working may exceed 80 dB (A).

The typical A-weighted noise level determined accord-

ing to EN62841-1:

Work mode: Cutting with plunge cut saw blade

Sound pressure level (L

pA) : 72 dB(A)

Uncertainty (K) : 3 dB(A)

The noise level under working may exceed 80 dB (A).

3 ENGLISH

The typical A-weighted noise level determined accord-

ing to EN62841-1:

Work mode: Cutting with segmental saw blade

Sound pressure level (L

pA) : 76 dB(A)

Uncertainty (K) : 3 dB(A)

The noise level under working may exceed 80 dB (A).

The typical A-weighted noise level determined accord-

ing to EN62841-1:

Work mode: Scraping

Sound pressure level (L

pA) : 71 dB(A)

Uncertainty (K) : 3 dB(A)

The noise level under working may exceed 80 dB (A).

NOTE: The declared noise emission value(s) has

been measured in accordance with a standard test

method and may be used for comparing one tool with

another.

NOTE: The declared noise emission value(s)

may also be used in a preliminary assessment of

exposure.

WARNING: Wear ear protection.

WARNING: The noise emission during actual

use of the power tool can dier from the declared

value(s) depending on the ways in which the

tool is used especially what kind of workpiece is

processed.

WARNING: Be sure to identify safety mea-

sures to protect the operator that are based on an

estimation of exposure in the actual conditions of

use (taking account of all parts of the operating

cycle such as the times when the tool is switched

o and when it is running idle in addition to the

trigger time).

Vibration

The vibration total value (tri-axial vector sum) deter-

mined according to EN62841-2-4:

Work mode: Sanding

Vibration emission (a

h) : 2.5 m/s2 or less

Uncertainty (K) : 1.5 m/s

The vibration total value (tri-axial vector sum) deter-

mined according to EN62841-1:

Work mode: Cutting with plunge cut saw blade

Vibration emission (a

h) : 2.5 m/s2 or less

Uncertainty (K) : 1.5 m/s

The vibration total value (tri-axial vector sum) deter-

mined according to EN62841-1:

Work mode: Cutting with segmental saw blade

Vibration emission (a

h) : 2.5 m/s2 or less

Uncertainty (K) : 1.5 m/s

The vibration total value (tri-axial vector sum) deter-

mined according to EN62841-1:

Work mode: Scraping

Vibration emission (a

h) : 2.5 m/s2 or less

Uncertainty (K) : 1.5 m/s

NOTE: The declared vibration total value(s) has been

measured in accordance with a standard test method

and may be used for comparing one tool with another.

NOTE: The declared vibration total value(s) may also

be used in a preliminary assessment of exposure.

WARNING: The vibration emission during

actual use of the power tool can dier from the

declared value(s) depending on the ways in which

the tool is used especially what kind of workpiece

is processed.

WARNING: Be sure to identify safety mea-

sures to protect the operator that are based on an

estimation of exposure in the actual conditions of

use (taking account of all parts of the operating

cycle such as the times when the tool is switched

o and when it is running idle in addition to the

trigger time).

EC Declaration of Conformity

For European countries only

The EC declaration of conformity is included as Annex A

to this instruction manual.

SAFETY WARNINGS

General power tool safety warnings

WARNING: Read all safety warnings, instruc-

tions, illustrations and specications provided

with this power tool. Failure to follow all instructions

listed below may result in electric shock, re and/or

serious injury.

Save all warnings and instruc-

tions for future reference.

The term "power tool" in the warnings refers to your

mains-operated (corded) power tool or battery-operated

(cordless) power tool.

Work area safety

1. Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

2. Do not operate power tools in explosive atmo-

spheres, such as in the presence of ammable

liquids, gases or dust. Power tools create sparks

which may ignite the dust or fumes.

3. Keep children and bystanders away while

operating a power tool. Distractions can cause

you to lose control.

Electrical safety

1. Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power

tools. Unmodied plugs and matching outlets will

reduce risk of electric shock.

2. Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators. There is an increased risk of elec-

tric shock if your body is earthed or grounded.

3. Do not expose power tools to rain or wet con-

ditions. Water entering a power tool will increase

the risk of electric shock.

Product specificaties

Merk:	Makita
Categorie:	Multitool
Model:	DTM52Z
Kleur van het product:	Black,Blue,Silver
Gewicht:	2000 g
Stroombron:	Batterij/Accu
Accu/Batterij voltage:	18 V
Input vermogen:	- W
Uitgangsvermogen:	370 W
Geluidsdrukniveau:	76 dB
Ingebouwd licht:	Ja
Aanpasbare snelheid:	Ja
Geluidsniveau onzekerheid:	3 dB
Trillingsniveau (schuren):	2.5 m/s²
Stationair aantal schuurbewegingen (min):	10000 OPM
Stationair aantal schuurbewegingen (max):	20000 OPM
Multi-tool applicatie:	Sanding,Sawing,Scraping
Soft start:	Ja
Type motor:	Borstelloos
Oscillatiehoek:	3.6 °
Accessoires wisselen zonder gereedschap:	Ja
Trillingsniveau (invalzaagblad):	2.5 m/s²
Trillingsniveau onzekerheid (invalzaagblad):	1.5 m/s²
Trillingsniveau (segmentzaagblad):	2.5 m/s²
Trillingsniveau onzekerheid (segmentzaagblad):	1.5 m/s²
Trillingsniveau (schrapen):	2.5 m/s²
Trillingsniveau onzekerheid (schrapen):	1.5 m/s²