Makita DJV181Z Handleiding

Makita Zaagmachine DJV181Z

Lees hieronder de 📖 handleiding in het Nederlandse voor Makita DJV181Z (16 pagina's) in de categorie Zaagmachine. Deze handleiding was nuttig voor 9 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/16

ENGLISH (Original instructions)

INSTRUCTION MANUAL

IMPORTANT: Read Before Using.

Cordless Jig Saw

DJV141

DJV181

013927

ENGLISH (Original instructions)

SPECIFICATIONS

Model DJV141 DJV181

Length of stroke 26 mm 26 mm

Wood 135 mm 135 mm

Mild steel 10 mm 10 mm

Max. cutting capacities

Aluminum 20 mm 20 mm

Strokes per minute (min

-1 ) 800 - 3,500 800 - 3,500

Overall length 280 mm 298 mm

Net weight 2.4 kg 2.5 kg

Rated voltage D.C. 14.4 V D.C. 18 V

• Due to our continuing program of research and development, the specifications herein are subject to change without notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

END004-6

Symbols

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

･ Read instruction manual.

･ Only for EU countries

Do not dispose of electric equipment or

battery pack together with household

waste material!

In observance of the European

Directives, on Waste Electric and

Electronic Equipment and Batteries and

Accumulators and Waste Batteries and

Accumulators and their implementation

in accordance with national laws, electric

equipment and batteries and battery

pack(s) that have reached the end of

their life must be collected separately

and returned to an environmentally

compatible recycling facility.

ENE019-1

Intended use

The tool is intended for the sawing of wood, plastic and

metal materials. As a result of the extensive accessory

and saw blade program, the tool can be used for many

purposes and is very well suited for curved or circular cuts.

ENG905-1

Noise

The typical A-weighted noise level determined

according to EN60745:

Sound pressure level (L

pA) : 78 dB (A)

Uncertainty (K) : 3 dB (A)

The noise level under working may exceed 80 dB (A).

Wear ear protection

ENG900-1

Vibration

The vibration total value (tri-axial vector sum)

determined according to EN60745:

Work mode : cutting boards

Vibration emission (ah,B) : 6.5 m/s2

Uncertainty (K) : 1.5 m/s2

Work mode : cutting sheet metal

Vibration emission (ah,M

) : 5.0 m/s2

Uncertainty (K) : 1.5 m/s2

ENG901-1

• The declared vibration emission value has been

measured in accordance with the standard test

method and may be used for comparing one tool

with another.

• The declared vibration emission value may also be

used in a preliminary assessment of exposure.

WARNING:

• The vibration emission during actual use of the

power tool can differ from the declared emission

value depending on the ways in which the tool is

used.

• Be sure to identify safety measures to protect the

operator that are based on an estimation of

exposure in the actual conditions of use (taking

account of all parts of the operating cycle such as

the times when the tool is switched off and when it

is running idle in addition to the trigger time).

Ni-MH

Li-ion

ENH101-17

For European countries only

EC Declaration of Conformity

Makita declares that the following Machine(s):

Designation of Machine:

Cordless Jig Saw

Model No./ Type: DJV141, DJV181

Conforms to the following European Directives:

2006/42/EC

They are manufactured in accordance with the following

Standard or standardized documents:

EN60745

The Technical file in accordance with 2006/42/EC is

available from:

Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium

31.12.2013

000331

Yasushi Fukaya

Director

Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium

GEA006-2

General Power Tool Safety

Warnings

WARNING Read all safety warnings and all

instructions. Failure to follow the warnings and

instructions may result in electric shock, fire and/or

serious injury.

Save all warnings and

instructions for future reference.

The term "power tool" in the warnings refers to your

mains-operated (corded) power tool or battery-operated

(cordless) power tool.

Work area safety

1. Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

2. Do not operate power tools in explosive

atmospheres, such as in the presence of

flammable liquids, gases or dust. Power tools

create sparks which may ignite the dust or fumes.

3. Keep children and bystanders away while

operating a power tool. Distractions can cause

you to lose control.

Electrical safety

4. Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power

tools. Unmodified plugs and matching outlets will

reduce risk of electric shock.

5. Avoid body contact with earthed or grounded

surfaces such as pipes, radiators, ranges and

refrigerators. There is an increased risk of

electric shock if your body is earthed or grounded.

6. Do not expose power tools to rain or wet

conditions. Water entering a power tool will

increase the risk of electric shock.

7. Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges or

moving parts. Damaged or entangled cords

increase the risk of electric shock.

8. When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use

of a cord suitable for outdoor use reduces the risk

of electric shock.

9. If operating a power tool in a damp location is

unavoidable, use a ground fault circuit

interrupter (GFCI) protected supply. Use of an

GFCI reduces the risk of electric shock.

Personal safety

10. Stay alert, watch what you are doing and use

common sense when operating a power tool.

Do not use a power tool while you are tired or

under the influence of drugs, alcohol or

medication. A moment of inattention while

operating power tools may result in serious

personal injury.

11. Use personal protective equipment. Always

wear eye protection. Protective equipment such

as dust mask, non-skid safety shoes, hard hat, or

hearing protection used for appropriate conditions

will reduce personal injuries.

12. Prevent unintentional starting. Ensure the

switch is in the off-position before connecting

to power source and/or battery pack, picking

up or carrying the tool. Carrying power tools

with your finger on the switch or energising power

tools that have the switch on invites accidents.

13. Remove any adjusting key or wrench before

turning the power tool on. A wrench or a key

left attached to a rotating part of the power tool

may result in personal injury.

14. Do not overreach. Keep proper footing and

balance at all times. This enables better control

of the power tool in unexpected situations.

15. Dress properly. Do not wear loose clothing or

jewellery. Keep your hair, clothing, and gloves

away from moving parts. Loose clothes,

jewellery or long hair can be caught in moving

parts.

16. If devices are provided for the connection of

dust extraction and collection facilities,

Product specificaties

Merk:	Makita
Categorie:	Zaagmachine
Model:	DJV181Z
Gewicht:	2600 g
Breedte:	77 mm
Diepte:	298 mm
Hoogte:	189 mm
Stroombron:	Batterij/Accu
Accu/Batterij voltage:	18 V
Opbergetui:	Nee
Inclusief acculader:	Nee
Inclusief batterij:	Nee
Zaagblad wisselen zonder gereedschap:	Ja
Stationair aantal zaagbewegingen (min):	800 spm
Stationair aantal zaagbewegingen (max):	3500 spm
Snij-diepte in hout:	135 mm
Snij-diepte in aluminium:	20 mm
Snij-diepte in niet-gelagerd staal:	10 mm
Stroke height:	26 mm