Makita CE002G Handleiding


Lees hieronder de ๐Ÿ“– handleiding in het Nederlandse voor Makita CE002G (28 pagina's) in de categorie Slijpmachine. Deze handleiding was nuttig voor 68 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/28
INSTRUCTION MANUAL
Cordless Power Cutter
CE002G
ENGLISH: Original instructions
Read before use.
2 ENGLISH
SPECIFICATIONS
Model: CE002G
Wheel diameter 350 - 355 mm
Max. wheel thickness 4.0 mm
Max. cutting depth 127 mm
Rated speed 4,200 min-1
Rated voltage D.C. 72 V - 80 V max
Recommended air volume of the vacuum cleaner Equal to or more than 1.8 m
3/min
Overall length 825 mm
Net weight 13.1 - 15.1 kg
โ€ข๎˜ƒ Due๎˜ƒto๎˜ƒour๎˜ƒcontinuing๎˜ƒprogram๎˜ƒof๎˜ƒresearch๎˜ƒand๎˜ƒdevelopment,๎˜ƒthe๎˜ƒspeci๎šฟcations๎˜ƒherein๎˜ƒare๎˜ƒsubject๎˜ƒto๎˜ƒchange๎˜ƒ
without notice.
โ€ข๎˜ƒ Speci๎šฟcations๎˜ƒmay๎˜ƒdi๓ฐ€จer๎˜ƒfrom๎˜ƒcountry๎˜ƒto๎˜ƒcountry.
โ€ข๎˜ƒ The๎˜ƒweight๎˜ƒmay๎˜ƒdi๓ฐ€จer๎˜ƒdepending๎˜ƒon๎˜ƒthe๎˜ƒattachment(s),๎˜ƒincluding๎˜ƒthe๎˜ƒbattery๎˜ƒcartridge.๎˜ƒThe๎˜ƒlightest๎˜ƒand๎˜ƒheavi-
est combinations, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery๎˜ƒcartridge BL4040 / BL4050F* / BL4080F*
*๎˜ƒ:๎˜ƒRecommended๎˜ƒbattery
Charger DC40RA / DC40RB / DC40RC
โ€ข๎˜ƒ Some๎˜ƒof๎˜ƒthe๎˜ƒbattery๎˜ƒcartridges๎˜ƒand๎˜ƒchargers๎˜ƒlisted๎˜ƒabove๎˜ƒmay๎˜ƒnot๎˜ƒbe๎˜ƒavailable๎˜ƒdepending๎˜ƒon๎˜ƒyour๎˜ƒregion๎˜ƒof๎˜ƒ
residence.
WARNING: Only use the battery cartridges and chargers listed above.๎˜ƒUse๎˜ƒof๎˜ƒany๎˜ƒother๎˜ƒbattery๎˜ƒcartridges๎˜ƒ
and๎˜ƒchargers๎˜ƒmay๎˜ƒcause๎˜ƒinjury๎˜ƒand/or๎˜ƒ๎šฟre.
Symbols
The๎˜ƒfollowings๎˜ƒshow๎˜ƒthe๎˜ƒsymbols๎˜ƒwhich๎˜ƒmay๎˜ƒbe๎˜ƒused๎˜ƒ
for๎˜ƒthe๎˜ƒequipment.๎˜ƒBe๎˜ƒsure๎˜ƒthat๎˜ƒyou๎˜ƒunderstand๎˜ƒtheir๎˜ƒ
meaning before use.
Read instruction manual.
Wear๎˜ƒsafety๎˜ƒglasses.
Do๎˜ƒnot๎˜ƒuse๎˜ƒabrasive๎˜ƒcut-o๓ฐ€จ๎˜ƒwheel.
Only๎˜ƒdiamond๎˜ƒwheel๎˜ƒis๎˜ƒapplicable.
Do not cut metal.
Do not feed water.
Ni-MH
Li-ion
Only๎˜ƒfor๎˜ƒEU๎˜ƒcountries
Due to the presence of hazardous com-
ponents in the equipment, waste electrical
and electronic equipment, accumulators
and๎˜ƒbatteries๎˜ƒmay๎˜ƒhave๎˜ƒa๎˜ƒnegative๎˜ƒimpact๎˜ƒ
on the environment and human health.
Do not dispose of electrical and electronic
appliances or batteries with household
waste!
In accordance with the European Directive
on waste electrical and electronic equip-
ment and on accumulators and batteries
and waste accumulators and batteries,
as well as their adaptation to national law,
waste electrical equipment, batteries and
accumulators๎˜ƒshould๎˜ƒbe๎˜ƒstored๎˜ƒseparately๎˜ƒ
and delivered to a separate collection point
for municipal waste, operating in accor-
dance with the regulations on environmen-
tal protection.
This๎˜ƒis๎˜ƒindicated๎˜ƒby๎˜ƒthe๎˜ƒsymbol๎˜ƒof๎˜ƒthe๎˜ƒ
crossed-out wheeled bin placed on the
equipment.
Intended use
The๎˜ƒtool๎˜ƒis๎˜ƒintended๎˜ƒfor๎˜ƒcutting๎˜ƒin๎˜ƒmasonry๎˜ƒmaterials๎˜ƒ
with a diamond wheel.
3 ENGLISH
Noise
The๎˜ƒtypical๎˜ƒA-weighted๎˜ƒnoise๎˜ƒlevel๎˜ƒdetermined๎˜ƒaccording๎˜ƒto๎˜ƒEN60745-2-22:
Sound๎˜ƒpressure๎˜ƒlevel๎˜ƒ(L
pA)๎˜ƒ:๎˜ƒ106๎˜ƒdB(A)
Sound๎˜ƒpower๎˜ƒlevel๎˜ƒ(L
WA)๎˜ƒ:๎˜ƒ117๎˜ƒdB๎˜ƒ(A)
Uncertainty๎˜ƒ(K)๎˜ƒ:๎˜ƒ3๎˜ƒdB(A)
NOTE:๎˜ƒThe๎˜ƒdeclared๎˜ƒnoise๎˜ƒemission๎˜ƒvalue(s)๎˜ƒhas๎˜ƒbeen๎˜ƒmeasured๎˜ƒin๎˜ƒaccordance๎˜ƒwith๎˜ƒa๎˜ƒstandard๎˜ƒtest๎˜ƒmethod๎˜ƒand๎˜ƒ
may๎˜ƒbe๎˜ƒused๎˜ƒfor๎˜ƒcomparing๎˜ƒone๎˜ƒtool๎˜ƒwith๎˜ƒanother.
NOTE:๎˜ƒThe๎˜ƒdeclared๎˜ƒnoise๎˜ƒemission๎˜ƒvalue(s)๎˜ƒmay๎˜ƒalso๎˜ƒbe๎˜ƒused๎˜ƒin๎˜ƒa๎˜ƒpreliminary๎˜ƒassessment๎˜ƒof๎˜ƒexposure.
WARNING: Wear ear protection.
WARNING: The noise emission during actual use of the power tool can di๓ฐ€จer from the declared val-
ue(s) depending on the ways in which the tool is used especially what kind of workpiece is processed.
WARNING: Be sure to identify safety measures to protect the operator that are based on an estimation
of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the
times when the tool is switched o๓ฐ€จ and when it is running idle in addition to the trigger time).
Vibration
Work mode: concrete cutting
Left hand Right hand Applicable standard
ah,W (m/s2) Uncertainty K (m/s2) ah,W (m/s2) Uncertainty K (m/s2)
2.5 1.5 2.5 1.5 EN60745-2-22
NOTE:๎˜ƒThe๎˜ƒdeclared๎˜ƒvibration๎˜ƒtotal๎˜ƒvalue(s)๎˜ƒhas๎˜ƒbeen๎˜ƒmeasured๎˜ƒin๎˜ƒaccordance๎˜ƒwith๎˜ƒa๎˜ƒstandard๎˜ƒtest๎˜ƒmethod๎˜ƒand๎˜ƒ
may๎˜ƒbe๎˜ƒused๎˜ƒfor๎˜ƒcomparing๎˜ƒone๎˜ƒtool๎˜ƒwith๎˜ƒanother.
NOTE:๎˜ƒThe๎˜ƒdeclared๎˜ƒvibration๎˜ƒtotal๎˜ƒvalue(s)๎˜ƒmay๎˜ƒalso๎˜ƒbe๎˜ƒused๎˜ƒin๎˜ƒa๎˜ƒpreliminary๎˜ƒassessment๎˜ƒof๎˜ƒexposure.
WARNING: The vibration emission during actual use of the power tool can di๓ฐ€จer from the declared
value(s) depending on the ways in which the tool is used especially what kind of workpiece is processed.
WARNING: Be sure to identify safety measures to protect the operator that are based on an estimation
of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the
times when the tool is switched o๓ฐ€จ and when it is running idle in addition to the trigger time).
Declarations of Conformity
For European countries only
The๎˜ƒDeclarations๎˜ƒof๎˜ƒconformity๎˜ƒare๎˜ƒincluded๎˜ƒin๎˜ƒAnnex๎˜ƒA๎˜ƒ
to this instruction manual.
SAFETY WARNINGS
General power tool safety warnings
WARNING Read all safety warnings, instruc-
tions, illustrations and speci๎šฟcations provided with
this power tool. Failure to follow all instructions listed
below๎˜ƒmay๎˜ƒresult๎˜ƒin๎˜ƒelectric๎˜ƒshock,๎˜ƒ๎šฟre๎˜ƒand/or๎˜ƒserious๎˜ƒ
injury.
Save all warnings and instruc-
tions for future reference.
The๎˜ƒterm๎˜ƒ"power๎˜ƒtool"๎˜ƒin๎˜ƒthe๎˜ƒwarnings๎˜ƒrefers๎˜ƒto๎˜ƒyour๎˜ƒ
mains-operated๎˜ƒ(corded)๎˜ƒpower๎˜ƒtool๎˜ƒor๎˜ƒbattery-operated๎˜ƒ
(cordless)๎˜ƒpower๎˜ƒtool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive atmo-
spheres, such as in the presence of ๎›€ammable
liquids, gases or dust. Power tools create sparks
which๎˜ƒmay๎˜ƒignite๎˜ƒthe๎˜ƒdust๎˜ƒor๎˜ƒfumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you๎˜ƒto๎˜ƒlose๎˜ƒcontrol.
Electrical safety
1. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodi๎šฟed๎˜ƒplugs๎˜ƒand๎˜ƒmatching๎˜ƒoutlets๎˜ƒwill๎˜ƒ
reduce risk of electric shock.
2. Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric๎˜ƒshock๎˜ƒif๎˜ƒyour๎˜ƒbody๎˜ƒis๎˜ƒearthed๎˜ƒor๎˜ƒgrounded.
3. Do not expose power tools to rain or wet con-
ditions. Water entering a power tool will increase
the risk of electric shock.


Product specificaties

Merk: Makita
Categorie: Slijpmachine
Model: CE002G

Heb je hulp nodig?

Als je hulp nodig hebt met Makita CE002G stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Slijpmachine Makita

Handleiding Slijpmachine

Nieuwste handleidingen voor Slijpmachine