Makita 9401 Handleiding

Makita Schuurmachine 9401

Lees hieronder de 📖 handleiding in het Nederlandse voor Makita 9401 (8 pagina's) in de categorie Schuurmachine. Deze handleiding was nuttig voor 55 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/8
1
ENGLISH (Original instructions)
INSTRUCTION MANUAL
DOUBLE INSULATION
WARNING:
For your personal safety, READ and UNDERSTAND before using.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Belt Sander
9901
9924DB
9401
9402
003360
2
ENGLISH (Original instructions)
SPECIFICATIONS
Model 9401 9402 9901 9924DB
Belt size 100 mm x 610 mm
76 mm x 533 mm 76 mm x 610 mm
Belt speed 5.8 m/s H 5.8 m/s
L 5.0 m/s 6.3 m/s 6.6 m/s
Overall length 374 mm 328 mm 355 mm
Net weight 7.4 kg 3.3 kg 4.8 kg
Safety class /II
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
END201-5
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
ï½¥ Read instruction manual.
ï½¥ DOUBLE INSULATION
ï½¥ Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic equipment and its
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an environmentally compatible
recycling facility.
ENE052-1
Intended use
The tool is intended for the sanding of large surface of
wood, plastic and metal materials as well as painted
surfaces.
ENF002-1
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated in accordance with European
Standard and can, therefore, also be used from sockets
without earth wire.
For Model 9401
ENG102-3
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
pA) : 89 dB(A)
Sound power level (L
WA) : 100 dB(A)
Uncertainty (K) : 3 dB(A)
Wear ear protection
ENG212-2
Vibration
The vibration total value (tri-axial vector sum)
determined according to EN60745:
Work mode : sanding metal plate
Vibration emission (ah) : 2.5 m/s2 or less
Uncertainty (K) : 1.5 m/s2
For Model 9402
ENG102-3
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
pA) : 93 dB(A)
Sound power level (L
WA) : 104 dB(A)
Uncertainty (K) : 3 dB(A)
Wear ear protection
ENG212-2
Vibration
The vibration total value (tri-axial vector sum)
determined according to EN60745:
Work mode : sanding metal plate
Vibration emission (ah) : 2.5 m/s2 or less
Uncertainty (K) : 1.5 m/s2
3
For Model 9924DB
ENG102-3
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
pA) : 91 dB(A)
Sound power level (LWA) : 102 dB(A)
Uncertainty (K) : 3 dB(A)
Wear ear protection
ENG212-2
Vibration
The vibration total value (tri-axial vector sum)
determined according to EN60745:
Work mode : sanding metal plate
Vibration emission (ah) : 2.5 m/s2 or less
Uncertainty (K) : 1.5 m/s2
ENG901-1
• The declared vibration emission value has been
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
• The vibration emission during actual use of the
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
• Be sure to identify safety measures to protect the
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
ENH101-13
For European countries only
EC Declaration of Conformity
We Makita Corporation as the responsible
manufacturer declare that the following Makita
machine(s):
Designation of Machine:
Belt Sande
r
Model No./ Type: 9401,9402,9924DB
are of series production and
Conforms to the following European Directives:
98/37/EC until 28th December 2009 and then with
2006/42/EC from 29th December 2009
And are manufactured in accordance with the following
standards or standardised documents:
EN60745
The technical documentation is kept by our authorised
representative in Europe who is:
Makita International Europe Ltd,
Michigan, Drive, Tongwell,
Milton Keynes, MK15 8JD, England
30th January 2009
000230
Tomoyasu Kato
Director
Makita Corporation
3-11-8, Sumiyoshi-cho,
Anjo, Aichi, JAPAN
GEA005-3
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical safety
4. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
5. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of
electric shock if your body is earthed or grounded.
6. Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
7. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords
increase the risk of electric shock.

Product specificaties

Merk: Makita
Categorie: Schuurmachine
Model: 9401

Heb je hulp nodig?

Als je hulp nodig hebt met Makita 9401 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Schuurmachine Makita

Makita

Makita BO4558 Handleiding

16 Juni 2023
Makita

Makita BO4555 Handleiding

6 Juni 2023
Makita

Makita PV7000C Handleiding

13 Mei 2023
Makita

Makita BO3711 Handleiding

5 Mei 2023
Makita

Makita 9911K Handleiding

2 Mei 2023
Makita

Makita 9911 Handleiding

26 April 2023
Makita

Makita 9901 Handleiding

20 April 2023
Makita

Makita BO4901 Handleiding

18 April 2023
Makita

Makita 9741 Handleiding

15 April 2023
Makita

Makita 9031 Handleiding

13 April 2023

Handleiding Schuurmachine

Nieuwste handleidingen voor Schuurmachine

Einhell

Einhell BT-BS 1200 Handleiding

4 December 2024
Einhell

Einhell TH-OS 1520 Handleiding

4 December 2024
King Craft

King Craft BBS 240 Handleiding

30 November 2024
King Craft

King Craft BNTS 150/200 Handleiding

30 November 2024
Bavaria By Einhell

Bavaria By Einhell Bavaria BBS 240/1 Handleiding

19 November 2024
Prowork

Prowork PSS 135 Handleiding

19 November 2024
Prowork

Prowork PD 150 Handleiding

19 November 2024
Proviel

Proviel HBS 1200 Handleiding

19 November 2024
Bavaria By Einhell

Bavaria By Einhell Bavaria BSS 280/1 Handleiding

19 November 2024
Bavaria By Einhell

Bavaria By Einhell Bavaria BSS 150 Handleiding

19 November 2024