Makita 5903RK Handleiding

Makita Zaagmachine 5903RK

Lees hieronder de 📖 handleiding in het Nederlandse voor Makita 5903RK (12 pagina's) in de categorie Zaagmachine. Deze handleiding was nuttig voor 17 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/12

ENGLISH (Original instructions)

INSTRUCTION MANUAL

DOUBLE INSULATION

IMPORTANT: Read Before Using.

Circular Saw

5603R

5703R

5705R

5903R

5103R

5143R

005391

ENGLISH (Original instructions)

SPECIFICATIONS

Model 5603R 5703R 5705R 5903R 5103R 5143R

Blade diameter 165 mm 190 mm 190 mm 235 mm 270 mm 355 mm

at 90° 54 mm 66 mm 66 mm 85 mm 100 mm 130 mm

Max. cutting depth at 45° 38 mm 46 mm 46 mm 64 mm 73 mm 90 mm

No load speed (min

-1) 5,000 4,800 4,800 4,500 3,800 2,700

Overall length 330 mm 356 mm 356 mm 400 mm 442 mm 607 mm

Net weight 4.9 kg 5.7 kg 5.7 kg 7.2 kg 9.4 kg 14.0 kg

Safety class /II /II /II /II /II /II

• Due to our continuing program of research and development, the specifications herein are subject to change without notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

END201-6

Symbols

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

･ Read instruction manual.

･ DOUBLE INSULATION

･ Only for EU countries

Do not dispose of electric equipment

together with household waste material!

In observance of European Directive

2012/19/EU on waste electric and

electronic equipment and its

implementation in accordance with

national law, electric equipment that

have reached the end of their life must

be collected separately and returned to

an environmentally compatible recycling

facility.

ENE078-2

Intended use

The tool is intended for performing lengthways and

crossways straight cuts and mitre cuts with angles in

wood while in firm contact with the workpiece. With

appropriate Makita genuine saw blades, other materials

can also be sawed.

ENF002-2

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and can

only be operated on single-phase AC supply. They are

double-insulated and can, therefore, also be used from

sockets without earth wire.

For model 5705R

ENF100-1

For public low-voltage distribution systems of

between 220 V and 250 V.

Switching operations of electric apparatus cause voltage

fluctuations. The operation of this device under unfavorable

mains conditions can have adverse effects to the operation

of other equipment. With a mains impedance equal or less

than 0.37 Ohms it can be presumed that there will be no

negative effects. The mains socket used for this device

must be protected with a fuse or protective circuit breaker

having slow tripping characteristics.

ENG905-1

Noise

The typical A-weighted noise level determined according

to EN60745:

Model 5603R

Sound pressure level (L

pA) : 91 dB(A)

Sound power level (L

WA) : 102 dB(A)

Uncertainty (K) : 3 dB(A)

Model 5143R

Sound pressure level (L

pA) : 88 dB(A)

Sound power level (L

WA) : 99 dB(A)

Uncertainty (K) : 3 dB(A)

Model 5703R, 5705R, 5903R

Sound pressure level (L

pA) : 92 dB(A)

Sound power level (L

WA) : 103 dB(A)

Uncertainty (K) : 3 dB(A)

Model 5103R

Sound pressure level (L

pA) : 87 dB(A)

Sound power level (L

WA) : 98 dB(A)

Uncertainty (K) : 3 dB(A)

Wear ear protection

ENG900-1

Vibration

The vibration total value (tri-axial vector sum) determined

according to EN60745:

Model 5603R

Work mode : cutting wood

Vibration emission (ah,W) : 2.5 m/s2 or less

Uncertainty (K) : 1.5 m/s2

Model 5103R, 5143R

Work mode : cutting wood

Vibration emission (ah,W) : 2.5 m/s2 or less

Uncertainty (K) : 1.5 m/s2

Work mode : cutting metal

Vibration emission (ah,M) : 2.5 m/s2 or less

Uncertainty (K) : 1.5 m/s2

Model 5703R

Work mode : cutting wood

Vibration emission (ah,W) : 3.5 m/s2

Uncertainty (K) : 1.5 m/s2

Model 5903R

Work mode : cutting wood

Vibration emission (ah,W) : 3.0 m/s2

Uncertainty (K) : 1.5 m/s2

Work mode : cutting metal

Vibration emission (ah,M) : 4.0 m/s2

Uncertainty (K) : 1.5 m/s2

Model 5705R

Work mode : cutting wood

Vibration emission (ah,W) : 2.5 m/s2

Uncertainty (K) : 1.5 m/s2

ENG901-1

• The declared vibration emission value has been

measured in accordance with the standard test

method and may be used for comparing one tool

with another.

• The declared vibration emission value may also be

used in a preliminary assessment of exposure.

WARNING:

• The vibration emission during actual use of the

power tool can differ from the declared emission

value depending on the ways in which the tool is

used.

• Be sure to identify safety measures to protect the

operator that are based on an estimation of

exposure in the actual conditions of use (taking

account of all parts of the operating cycle such as

the times when the tool is switched off and when it

is running idle in addition to the trigger time).

ENH101-16

For European countries only

EC Declaration of Conformity

We Makita Corporation as the responsible

manufacturer declare that the following Makita

machine(s):

Designation of Machine:

Circular Saw

Model No./ Type: 5603R, 5703R, 5705R, 5903R, 5103R,

5143R

are of series production and

Conforms to the following European Directives:

2006/42/EC

And are manufactured in accordance with the following

standards or standardised documents:

EN60745

The technical documentation is kept by:

Makita International Europe Ltd.

Technical Department,

Michigan Drive, Tongwell,

Milton Keynes, Bucks MK15 8JD, England

30.1.2009

000230

Tomoyasu Kato

Director

Makita Corporation

3-11-8, Sumiyoshi-cho,

Anjo, Aichi, 446-8502, JAPAN

GEA005-3

General Power Tool Safety

Warnings

WARNING Read all safety warnings and all

instructions. Failure to follow the warnings and

instructions may result in electric shock, fire and/or

serious injury.

Save all warnings and

instructions for future reference.

The term "power tool" in the warnings refers to your

mains-operated (corded) power tool or battery-operated

(cordless) power tool.

Work area safety

1. Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

Product specificaties

Merk:	Makita
Categorie:	Zaagmachine
Model:	5903RK
Gewicht:	7600 g
Geluidsniveau:	106 dB
Stroombron:	AC
Input vermogen:	1550 W
Stationair toerental (max):	4500 RPM
Opbergetui:	Ja
Mes doorsnede:	235 mm
Snij-diepte (90º):	85 mm
Snij-diepte (45º):	64 mm