Lorex LDC6081 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Lorex LDC6081 (2 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 56 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
Contents
Weatherproof IR dome camera
Mounting screws x 4
60ft. BNC / power extension cable
BNC female / RCA male adapter
Power adapter
Features
Advanced Sony Super HAD™ II image sensor
Video image processor produces sharp and clear video at
600 TV lines of resolution
4–9mm manual zoom lens for flexible viewing angle
(39–93º diagonal)
ClearNight imaging technology ensures clear night vision and
improves recording efficiency up to 30%
Night vision up to 75ft. (23m) away in total darkness*
Split glass design minimizes IR reflection
IP66 rated aluminum housing for indoor / outdoor
installations**
Disclaimers:
* Infrared illumination range under ideal conditions. Actual range and clarity may vary depending on
scene / object reflection and camera application.
** Not intended for submersion in water. Installation in a sheltered location recommended.
Warning/Caution
Read this guide carefully and keep it for future reference
Follow all instructions for safe use of the product
Use the camera within given temperature, humidity and voltage
levels noted in Camera Specifications
Do not disassemble the camera
Do not point the camera directly towards the sun or a source of
intense light
Use only the supplied regulated power supply. Use of a non-
regulated, non-conforming power supply can damage this
product and voids the warranty
The supplied extension cable is rated for surface mounting only
Cables for in-wall / floor-to-floor installations are sold
separately
Installation Tips
Point the camera where there is the least amount of obstructions
(i.e. tree branches)
Install the camera in a location that is difficult for vandals to
reach
Secure cabling so that it is not exposed or easily cut
Camera rated for outdoor use. Installation in a sheltered
location recommended
WARNING - A REGULATED UL / CSA APPROVED power supply is
REQUIRED for use with this camera. Use of a non-regulated, non-
conforming power supply can damage this product and voids the
warranty.
Camera Specifications
* IR Illumination Range under ideal conditions. Objects at or beyond this range may be partially or
completely obscured, depending on the camera application.
** Not intended for submersion in water. Installation in a sheltered location recommended.
Dimensions
Copyright © 2011 Lorex Technologies Inc.
As our products are subject to continuous improvement, Lorex reserves the right to modify product design,
specifications and prices, without notice and without incurring any obligation. E&OE
Image Sensor 1/3” Sony Super HAD™ II
Video Format NTSC
Effective Pixels H: 768 V: 494
Resolution 600 TV Lines
Scan System 2:1 Interlace
Sync System Internal
S / N Ratio 50dB (AGC Off)
Iris AES
AES Shutter Speed 1/60 ~ 1/100,000 sec.
Min. Illumination 0.2 Lux without IR LED
0 Lux with IR LED
Video Output Composite 1.0Vpp @ 75ohm
Lens / Lens Type 4–9mm F1.4 / Varifocal
FOV (Diagonal) 39–93°
Termination BNC Type
IR LED Qty. / Type 28 pieces / 850nm
Night Vision Range* 75ft / 23m
Power Requirement 12V DC ±10%
Power Consumption Max. 400mA (w / IR)
Operating Temp. Range 14° ~ 122°F / –10° ~ 50°C
Operating Humidity Range < 90% RH
Environmental Rating** IP66
Weight (including stand) 1.6lbs. / 0.7kg
120mm / 4.8"
102mm / 4.1”
Product Information
User Manuals
Quick Start Guides
Specification Sheets
Software Upgrades
Firmware Upgrades
LDC6081
SUPER RESOLUTION WEATHERPROOF
VARIFOCAL NIGHT VISION DOME CAMERA
FOR SUPPORT AND INFORMATION,
VISIT WWW.LOREXTECHNOLOGY.COM
QUICK START GUIDE
English Version 1.0
Installing The Camera
Before installing the camera:
Decide whether to run the cables
through the wall / ceiling
(drilling required), or along the
wall / ceiling.
If you run the cables along the
wall / ceiling, you must run the
cable through the cable notch on
the base. This will keep the
camera base flush to the wall /
ceiling when mounted.
To install the camera:
1. Rotate the camera base counterclockwise to separate
it from the ball camera and dome cover.
2. Feed the BNC / power cable through the camera base.
If you are running the cables against a wall or ceiling,
make sure to pass the cable through the cable notch as
shown above.
3. Connect the video and power cable as shown in the
next section ‘Connecting The Camera‘.
4. Mount the camera base to the wall or ceiling using the
included screws.
5. Position the dome cover over the camera and screw it
clockwise halfway onto the camera base.
6. Move the ball camera to the desired position. While
holding the ball camera firmly in place, screw the dome
cover the rest of the way to secure it to the camera base.
Holding the camera prevents it from moving while
installing the dome cover.
ATTENTION - Test all connections and ensure the camera is working
correctly prior to permanent installation by temporarily connecting the
camera(s) and cable(s) to the viewing / recording solution.
Cable notch
Connecting The Camera
Lens Adjustment
Use a flathead screwdriver to adjust the Focus and Zoom control
screws on the camera if necessary.
Note: Have a second person verify the camera image when you
adjust the focus and zoom.
BNC to RCA Adapter
Setup Diagram
Connect the BNC and power
connectors to the camera.
Connect the BNC connector to
the video input of the monitor /
DVR, and connect the included
power connector to a power
adapter. See Setup Diagram
below for details.
Male power
BNC
To Camera: To Monitor / DVR:
Female power
Zoom
Focus
DVR / CCTV MONITOR
Video IN
TV / VCR
Video IN
BNC to RCA Adapter
Attach the included BNC to RCA adapter to connect the
extension cable to RCA inputs (i.e. for a TV connection).
Cable Extension Options
Extend the cable run for your camera up to 300ft. or more
depending on the cable type used. See table below:
Notes:
1. For optimal performance, consider using option 2 or 3. It is best
to use the same cable type for the entire distance.
2. Cable run recommendation based on typical camera power
consumption (up to 500mA). For specialty cameras with higher
current consumption, maximum cable run may be reduced.
Consider providing power to the camera at the camera side,
rather then at the end of the extension cable.
3. Indicators that your cable run may be too long:
• Video is permanently black & white (even during day time)
• Video is distorted
Troubleshooting
Option Cable Type Max Cable
Run Distance
Max. # of
Extensions
1 Regular BNC (supplied with
camera)
180ft. / 55m 3
2 'RG59' or 'Coax' or ' Coaxial'
BNC (sold separately) 300ft. / 92m 5
3 Lorex Universal Cable
(sold separately) 300ft. / 92m 3
Problem Solution
No Picture / Signal Ensure your TV is on the correct input channel.
Common terms of an input channel: INPUT, AV
CHANNEL, LINE1, LINE2, AUX.
If your camera is connected to a VCR / DVR,
ensure it is properly connected to your TV /
Monitor.
Ensure connections are properly connected.
Ensure the camera power supply is plugged in.
Picture is too bright Ensure your camera isn’t pointed directly at a
source of light (e.g sun or spot light).
Slide the sunshade (bullet cameras only)
forward to block excess light.
Move your camera to a different location.
Picture is too dark If using during the day, the camera may not be
getting enough light. Slide the sunshade (bullet
cameras only) backwards to let in more light.
Check the brightness and contrast settings of
the device your camera connects to (TV /
Monitor / DVR).
Night vision is not
working The night vision activates when light levels
drop. The area may have too much light.
Picture is not clear Check the camera lens for dirt, dust, and
spiderwebs. Clean the lens with a soft, clean
cloth.
Make sure that the cable run is within the
limitations specified in the section ' Cable
Extension Options'.
Bright spot in video
when viewing camera
at night
Night vision reflects when pointing a camera to
a window. Move the camera to a different
location.
BNC connection does
not connect to my TV
Use a BNC to RCA adapter at the end of the
extension cable.
Camera Base


Product specificaties

Merk: Lorex
Categorie: Bewakingscamera
Model: LDC6081
Kleur van het product: Black,White
Gewicht verpakking: 1400 g
Breedte verpakking: 216 mm
Diepte verpakking: 172 mm
Hoogte verpakking: 140.5 mm
Internationale veiligheidscode (IP): IP66
Vormfactor: Dome
Ondersteuning voor plaatsing: Binnen & buiten
Connectiviteitstechnologie: Bedraad
Ethernet LAN: Nee
Montagewijze: Plafond
Maximum resolutie: - Pixels
Minimale belichting: 0 Lux
Field of view (FOV) hoek: 93 °
Meegeleverde kabels: BNC
Geïntegreerde geheugenkaartlezer: Nee
Ingebouwde HDD: Nee
Nachtvisie: Ja
LED-type: IR
Infrarood wavelength: 850 nm
Brandpuntbereik: 4 - 9 mm
Formaat analoog signaal: NTSC
Omvang optische sensor: 1/3 "
Type beeldsensor: CCD
Optische zoom: - x
Camera sluitertijd: 1/60 - 1/100000 s
Interface: BNC
Stroomverbruik: 400 mA
Composiet video-uitgang: 1
Power over Ethernet (PoE): Nee
Scherpstellen: 1.4
Aantal TV lijnen: 600
Nachtkijker afstand: 23 m
Aantal verlichtingen LEDS: 28
Wifi: Nee
Bedrijfstemperatuur (T-T): -10 - 50 °C
Relatieve vochtigheid in bedrijf (V-V): 0 - 90 procent

Heb je hulp nodig?

Als je hulp nodig hebt met Lorex LDC6081 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Bewakingscamera Lorex

Handleiding Bewakingscamera

Nieuwste handleidingen voor Bewakingscamera