Lorex LDC6080B Handleiding

Lorex Bewakingscamera LDC6080B

Lees hieronder de 📖 handleiding in het Nederlandse voor Lorex LDC6080B (2 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 45 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

QUICK START GUIDE

www.lorextechnology.com

Lorex Technologies Inc.

As our products are subject to continuous improvement, Lorex reserves the right to modify product

design, specifications and prices, without notice and without incurring any obligation. E&OE

Cable Extension Options SUPER RESOLUTION IR

VANDAL DOME

CAMERA

Problem Solution

No Picture/Signal • Ensure your TV is on the correct input

channel. Common terms of an input channel:

INPUT, AV CHANNEL, LINE1, LINE2, AUX.

• If your camera is connected to a VCR/DVR,

ensure it is properly connected to your TV/

Monitor.

• Ensure connections are properly connected.

• Ensure all the camera power supply is

plugged in.

Picture is too bright • Ensure your camera isn’t pointed directly at a

source of light (e.g sun or spot light).

• Slide the sunshade (bullet cameras only)

forward to block excess light.

• Move your camera to a different location.

Picture is too dark • If using during the day, the camera may not

be getting enough light. Slide the sunshade

backwards to let in more light. Check the

brightness and contrast settings of the device

your camera connects to (TV/Monitor/DVR).

Night Vision is not

working

• The night vision activates when light levels

drop. The area may have too much light.

Picture is not clear • Check the camera lens for dirt, dust,

spiderwebs. Clean the lens with a soft, clean

cloth.

• Make sure that the cable run is within the

limitations specified in the section ' Cable

Extension Options'

Bright spot in video

when viewing camera

at night

• Night vision reflects when pointing a camera

to a window. Move the camera to a different

location.

BNC connection does

not connect to my TV

• Use a BNC to RCA adapter at the end of the

extension cable.

Troubleshooting

Option Cable Type

1Regular BNC

(supplied with

camera)

180ft / 55m 3

2'RG59' or 'Coax'

or ' Coaxial'

BNC (sold sepa-

rately)

300ft / 92m 5

3Lorex Universal

Cable

(sold separately)

300ft / 92m 3

Max. Cable

Run Distance

Max. # of

Extensions

MODEL: LDC6080 SERIES

English Version 1.0

Image Sensor 1/3" Sony Super HAD™ II

Video Format / Pixels

Horizontal Resolution

Video Output

IR / Night Vision Range

Field of View (diagonal)

Minimum Illumination

Termination

NTSC: 768(H)×494(V)

600 TVL

Comp. 1.0 Vpp @ 75ohm

39 - 93 Degrees

0 LUX (IR LEDs on)

Video: BNC Female

Power: Barrel Female

Lens / Lens Mount 4~9mm F1.6~2.4 / Varifocal

Camera Specifications

Notes:

1. For optimal performance, consider using option 2 or 3. Preference for using

the same cable type for the entire distance.

2. Cable run recommendation based on typical camera power consumption (up

to 500mA). For specialty cameras with higher current consumption,

maximum cable run may be reduced. Consider providing power to the camera

at the camera side rather then at the end of the extension cable.

3. Indicators that your cable run may be too long:

• Video is permanently Black & White (even during day time)

• Video is distorted

Product Information

User Manuals

Quick Start Guides

Specification Sheets

Software Upgrades

Firmware Upgrades

www.lorextechnology.com

IT’S ALL ON THE WEB!

Extend the cable run for your camera up to 300ft or more

depending on the cable type used. See table below:

Operating Temperature 14°F ~ 122°F

(-10°C ~ 50°C)

Power Requirement 12V DC ±10%

Power Consumption 500 mA or 6W max

Weight (with stand) 1.6 lbs. / 0.8 kg

35 IR LED/100 ft. (30m)

Environmental Rating IP 66

5.3in/135mm

4 in /

101.6mm

Setup Diagram

Before Installing The Camera

• Decide whether to run the cables through the wall/ceiling (drilling required), or along

the wall/ceiling.

• If you run the cables along the wall/ceiling,

you must run the cables through the

opening in the camera base, then tuck the

cable into the cable notch on the base.

This will keep the camera base flush to the

wall/ceiling when mounted.

To install the camera:

1. Remove the three screws located on the outer ring of the

Dome Cover using the Allen key (included).

2. Mount the Camera Base to the ceiling or wall using the

provided screws.

3. Position the Ball Camera at the desired position and

angle.

4. Position the Dome Cover over the Ball Camera. Holding

the cover firmly in place, use the Allen key to tighten the

screws on the outer ring of the Dome Cover.

Cable notch

ATTENTION - Test all connections and ensure the camera is working

correctly prior to permanent installation by temporarily connecting the

camera(s) and cable(s) to the viewing/recording solution.

Tighten the dome

cover using the

Allen key.

Contents

Features

1x Super Resolution Color Camera

3 x Mounting screws / 1 x Allen key

1x 60ft. BNC/Power Extension Cable

1x BNC to RCA Adaptor

1x Power Adapter

Installation Tips

• Point the camera where there is the least amount of

obstructions (ie tree branches).

• Install the camera in a location that is difficult for

vandals to reach.

• Secure cabling so that it is not exposed or easily cut.

• Connect your system and cameras to a back-up power

supply. This ensures the system continues to record

during power outtages.

Installing The Camera

Warning / Caution Statements

1. Read this guide carefully and keep it for future reference.

2. Follow all instructions for safe use of the product.

3. Use the camera within given temperature, humidity and voltage levels noted

in Camera Specifications.

4. Do not disassemble the camera.

5. Do not point the camera directly towards the sun or a source of intense light.

6. Use only the supplied regulated power supply. Use of a non-regulated, non-

conforming power supply can damage this product and voids the warranty.

7. The supplied extension cable is rated for surface mounting only.

Cables for in-wall / floor-to-floor installations are sold separately.

BNC to RCA Adapter

WARNING - A REGULATED UL/CSA APPROVED power supply is

REQUIRED for use with this camera. Use of a non-regulated, non-

conforming power supply can damage this product and voids the warranty.

3 pcs

Video (BNC)

Power

• 600TV line resolution for unmatched video quality

• Latest Sony Super HAD™ 2nd generation Image

Sensor

• Advanced Noise Reduction for crystal clear Night

Vision

• Improved recording storage efficiency by up to 30%

• Dual glass design prevents IR light reflection

• Varifocal lens for flexible area coverage

• Weatherproof, vandal resistant aluminum housing

• Flexible camera design for wall and ceiling mounting

Use a screwdriver to adjust the Focus and Zoom control

screws on the camera if necessary.

Zoom

Focus

Note: Have a second person verify the camera image when you

adjust the Focus and Zoom settings.

Lens Adjustment

Connecting The Camera

DVR/CCTV MONITOR

Video IN

TV/VCR

Video IN

Attach the included BNC to RCA adapter to connect the

extension cable to RCA inputs (i.e. for a TV connection).

BNC to RCA Adapter

Connect the BNC and power

connectors to the camera.

Connect the BNC connector to

the video input of the monitor/

DVR, and connect the included

power connector to a power

adapter.

Male power connector

BNC Connector

To Camera: To Monitor/ DVR:

Female power connector

Product specificaties

Merk:	Lorex
Categorie:	Bewakingscamera
Model:	LDC6080B
Stroomvoorziening:	12VDC
Maximum resolutie:	768 x 494 Pixels
Minimale belichting:	0 Lux
Nachtvisie:	Ja
LED-type:	IR
Infrarood wavelength:	850 nm
Brandpuntbereik:	4 - 9 mm
Formaat analoog signaal:	NTSC
Omvang optische sensor:	1/3 "
Type beeldsensor:	CCD
Camera sluitertijd:	1/60 - 1/100000 s
Stroomverbruik:	500 mA
Signaal/ruis-verhouding:	52 dB
Power over Ethernet (PoE):	Nee
Maximale afstand:	30 m
Aantal TV lijnen:	600
Aantal verlichtingen LEDS:	35
Wifi:	Nee
Stroomverbruik (typisch):	6 W
Bedrijfstemperatuur (T-T):	-10 - 50 °C
Bereik kantelhoek:	39 - 93 °
F-nummer (relatieve aperture):	1.6