Livarno Lux IAN 101253 Handleiding

Livarno Lux Verlichting IAN 101253

Lees hieronder de 📖 handleiding in het Nederlandse voor Livarno Lux IAN 101253 (32 pagina's) in de categorie Verlichting. Deze handleiding was nuttig voor 40 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/32

Operator’s Manual

VIKING PAPR FGS 3250D

WELDING HELMET

www.lincolnelectric.com/register

Authorized Service and Distributor Locator:

www.lincolnelectric.com/locator

IM10524 | Issue D ate Mar-21

Save for future reference

Date Purchased

K#: (ex: K3930-1)

Serial: (ex: U1060512345)

POWERED AIR-PURIFYING RESPIRATOR (PAPR)

WITH FGS 3250D AUTO-DARKENING HELMET

WARNING: Users must read and understand the

user instructions prior to use. Use of this respirator

by untrained or unqualified people, or use that is not

in accordance with these user instructions, may

adversely affect respirator performance and may

be dangerous to your health. Keep this operator’s

manual for future reference.

CODE NUMBER:

12895

12894

FUMES AND GASES can be dangerous to your health

• Fumes from the normal use of welding

products contain significant quantities of

potentially hazardous compounds. See

consumable product label/insert.

• Keep your head out of fumes.

• Use enough ventilation or local exhaust to keep fumes and

gases from your breathing zone and general area.

• An approved respirator should be used unless exposure

assessments are below applicable exposure limits.

• When welding with electrodes which may require additional

ventilation such as stainless or hard facing (see instructions on

container or Safety Data Sheet (SDS) or on lead or cadmium

plated steel and other metals or coatings which produce highly

toxic fumes, keep exposure as low as possible and within

applicable OSHA PEL and ACGIH TLV limits using local exhaust

or mechanical ventilation. In confined spaces or in some

circumstances, outdoors, a respirator may be required.

Additional precautions are also required when welding on

galvanized steel.

NIOSH approval

IMPORTANT: THIS RESPIRATOR IS INTENDED TO BE USED BY

TRAINED INDIVIDUALS IN ACCORDANCE WITH

ALL THE PROVISIONS OF AN ORGANIZED

RESPIRATORY PROTECTION PROGRAM WHICH

COMPLIES WITH THE REQUIREMENTS OF THE

OSHA STANDARD 29 CFR 1910.134 AVAILABLE

FROM THE US DEPARTMENT OF LABOR,

OCCUPATIONAL SAFETY AND HEALTH ADMINIS-

TRATION OR IN CANADA CONFORMANCE WITH

CSA Z94.4.

The Viking PAPR 3350 is approved in the USA by NIOSH for use

in environments where:

• Particulate concentrations are known and characterized.

• Particulate concentrations are not I mmediately Dangerous to

Life or Health (IDLH).

• Atmospheres are NOT oxygen deficient.

• Contaminant concentrations do not exceed the Maximum Use

Concentration (MUC) determined using the Assigned Protection

Factor (APF) for specific respirator system or the APF

mandated by specific government standards, whichever is

lower.

The Viking PAPR 3350 respirator components and filtration

media must be used only in configurations listed on the NIOSH

approval label. Refer to NIOSH approval label for list of approved

components.

This respirator is not capable of or approved for use in an area

which includes hazardous levels of gases . It is only effective to

filter out particulate contaminants.

ARC Rays can injure eyes and burn skin

• Before welding, always inspect helmet and

filter lens to be sure they are fitted

properly, in good condition and not

damaged.

• Check to see that the clear lens is clean and securely attached

to the helmet.

• Always wear safety glasses with side shields or goggles under

the welding helmet and protective clothing to protect your

skin from radiation, burns and spatter.

• Ensure that optical radiation from other welder’s arcs in the

immediate area does not enter in from behind the helmet

and auto-darkening filter.

• Stop welding immediately if the auto-darkening lens does not

darken when arc is struck. See instruction manual

for troubleshooting information.

• Do not weld in the overhead position while using this

helmet.

Note: Auto-darkening filters in Lincoln helmets are designed to

protect the user against harmful ultra-violet and infrared

rays both in the dark and light states. No matter what

shade the filter is set to, the UV/IR protection is always

present.

SAFETY

SAFETY WARNINGS – READ BEFORE USING

Refer to for additional safety information.http: //www.lincolnelectric.com/safety

THANK YOU FOR SELECTING

A QUALITY PRODUCT BY

LINCOLN ELEC TRIC.

PLEASE EXAMINE CARTON AND EQUIPMENT FOR

DAMAGE IMMEDIATELY

When this equipment is shipped, title passes to the purchaser

upon receipt by the carrier. Consequently, claims for material

damaged in shipment must be made by the purchaser against the

transportation company at the time the shipment is received.

SAFETY DEPENDS ON YOU

Lincoln arc welding and cutting equipment is designed and built

with safety in mind. However, your overall safety can be increased

by proper installation ... and thoughtful operation on your part.

DO NOT INSTALL, OPERATE OR REPAIR THIS EQUIPMENT

WITHOUT READING THIS MANUAL AND THE SAFETY

PRECAUTIONS CONTAINED THROUGHOUT. And, most importantly,

think before you act and be careful.

This statement appears where the information must be followed

exactly to avoid serious personal injury or loss of life.

This statement appears where the information must be followed

to avoid minor personal injury or damage to this equipment.

KEEP YOUR HEAD OUT OF THE FUMES.

DON’T get too close to the arc.

Use corrective lenses if necessary

to stay a reasonable distance

away from the arc.

READ and obey the Safety Data

Sheet (SDS) and the warning label

that appears on all containers of

welding materials.

USE ENOUGH VENTILATION or

exhaust at the arc, or both, to

keep the fumes and gases from

your breathing zone and the general area.

IN A LARGE ROOM OR OUTDOORS, natural ventilation may be

adequate if you keep your head out of the fumes (See below).

USE NATURAL DRAFTS or fans to keep the fumes away

from your face.

If you de velop unusual symptoms, see your supervisor.

Perhaps the welding atmosphere and ventilation system

should be checked.

WEAR CORRECT EYE, EAR &

BODY PROTECTION

PROTECT your eyes and face with welding helmet

properly fitted and with proper grade of filter plate

(See ANSI Z49.1).

PROTECT your body from welding spatter and arc

flash with protective clothing including woolen

clothing, flame-proof apron and gloves, leather

leggings, and high boots.

PROTECT others from splatter, flash, and glare

with protective screens or barriers.

IN SOME AREAS, protection from noise may be appropriate.

BE SURE protective equipment is in good condition.

Also, wear safety glasses in work area

AT ALL TIMES.

SPECIAL SITUATIONS

DO NOT WELD OR CUT containers or materials which previously

had been in contact with hazardous substances unless they are

properly cleaned. This is extremely dangerous.

DO NOT WELD OR CUT painted or plated parts unless special

precautions with ventilation have been taken. They can release

highly toxic fumes or gases.

Additional precautionary measures

PROTECT compressed gas cylinders from excessive heat,

mechanical shocks, and arcs; fasten cylinders so they cannot fall.

BE SURE cylinders are never grounded or part of an

electrical circuit.

REMOVE all potential fire hazards from welding area.

ALWAYS HAVE FIRE FIGHTING EQUIPMENT READY FOR

IMMEDIATE USE AND KNOW HOW TO USE IT.

WARNING

CAUTION

Safety 01 of 04 - 5/16/2018

Product specificaties

Merk:	Livarno Lux
Categorie:	Verlichting
Model:	IAN 101253

Heb je hulp nodig?

Als je hulp nodig hebt met Livarno Lux IAN 101253 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Verlichting Livarno Lux

Livarno Lux IAN 89559 Handleiding

29 November 2024

Livarno Lux IAN 37695 Handleiding

29 November 2024

Livarno Lux IAN 292044 Handleiding

29 November 2024

Livarno Lux IAN 286986 Handleiding

29 November 2024

Livarno Lux IAN 282512 Handleiding

29 November 2024

Livarno Lux IAN 273535 Handleiding

29 November 2024

Livarno Lux IAN 280201 Handleiding

17 November 2024

Livarno Lux IAN 103915 Handleiding

17 November 2024

Livarno Lux IAN 69126 Handleiding

17 November 2024

Livarno Lux IAN 288563 Handleiding

17 November 2024

Handleiding Verlichting

Nieuwste handleidingen voor Verlichting

EMOS D5AB01 Handleiding

2 December 2024

EMOS D3EW04 Handleiding

2 December 2024

EMOS DCLW09 Handleiding

2 December 2024

EMOS D4AA04 Handleiding

2 December 2024

EMOS D4FW01 Handleiding

2 December 2024

EMOS D5AP01 Handleiding

2 December 2024

EMOS D5AW01 Handleiding

2 December 2024

EMOS D4AM10 Handleiding

2 December 2024

EMOS D4BC02 Handleiding

2 December 2024

EMOS D5ZM01 Handleiding

2 December 2024