Lindy 32321 Handleiding

Lindy Schakelaar 32321

Lees hieronder de 📖 handleiding in het Nederlandse voor Lindy 32321 (12 pagina's) in de categorie Schakelaar. Deze handleiding was nuttig voor 77 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/12

For Home and Office Use

Tested to Comply with

FCC Standards

KVM Switch Pro USB 2.0 Audio

User Manual English

Benutzerhandbuch Deutsch

Manuel Utilisateur Français

Manuale d’uso Italiano

LINDY No. 32320 – 2 Port VGA

LINDY No. 32321 – 4 Port VGA

LINDY No. 32322 – 2 Port DVI-I

LINDY No. 32323 – 4 Port DVI-I

www.LINDY.com

- 2 -

User Manual ...................... English......................... page 3

Benutzerhandbuch ........... Deutsch........................ Seite 8

Manuel d’utilisateur .......... Français..................... page 13

Manuale d’uso................... Italiano .................... pagina 18

Certifications & Statements.................................. page 24

User Manual English

- 3 -

Introduction

Thank you for purchasing the LINDY KVM Switch Pro USB 2.0 Audio. This

product is covered by a limited 2 Year warranty.

Pease read this manual carefully to fully understand all the functions and features

of this advanced USB KVM Switch.

This KVM Switch allows several USB enabled computers to be connected and

controlled from a single keyboard, monitor and mouse thereby reducing hardware

costs and maximising desk space.

Product Features

The LINDY KVM Switch Pro USB 2.0 Audio supports advanced features that allow

modern USB enabled computers such as PCs and Macs to connect and share

USB peripherals, such as printers, scanners, storage devices etc.

•

Supports USB mice and keyboards as well as USB 2.0 device sharing among

the connected computers

•

Computer port selection by any of the following:

o Front panel push buttons on the switch

o Keyboard Hotkey – configurable by the user

•

Audio support for microphone and speakers. Includes selectable switching

function which can be configured to exclude audio switching for uninterrupted

listening.

•

Built in 2 port USB 2.0 hub allows peripherals to be shared between the

connected computers. USB hub ports can be configured to be excluded from

switching when changing computers.

•

DVI-I and as VGA versions available, both with 2 or 4 ports and supplied with

KVM cables for connecting to the computers.

•

The DVI-I version uses advanced DVI-I technology for digital video as well as

analogue video signals via the DVI-I connector. Supports all digital DVI-D

Single Link resolutions up to 1920 x 1200, and analogue VGA resolutions up to

2048 x 1536.

Package contents



LINDY KVM Switch Pro USB 2.0 Audio



2 or 4 sets of KVM cables (depending on model) to connect the computers



Power supply



This manual

User Manual English

- 4 -

USB 2.0 Device Sharing

This KVM Switch provides USB keyboard and mouse ports as well as two USB 2.0 hub ports to

connect different USB 2.0 devices. The built in USB hub supports USB data rates of up to

480Mbps. The internal USB 2.0 hub ports also support the connection of an additional USB hub

allowing more that two devices to be connected to the KVM switch. USB devices can either be

switched together with the KVM function or configured to be excluded from switching.

Important Note: If you share USB Pen Drives, Card Readers or other memory devices, and

switch them between your computers, you must make sure that any current data transfer is

completed before you change channels. If you do not do this the active data transfer may be

interrupted and files may become corrupted or lost. To prevent such problems make sure that

any data transfer has completed or use the Windows or Mac function to remove the USB

hardware safely.

Installation

DVI version: If you wish to connect computers with both digital DVI-D and

analogue VGA signals then you will need to add the LINDY VGA to DVI Adapter

(Part No. 41223) to your graphics card. Please also ensure your monitor accepts

both digital and analogue signals. This KVM Switch does not convert the video

signal but only switches the analogue and digital signals. If your monitor has two

separate input connectors for analogue (VGA) and digital (DVI-D) signals then you

will require the LINDY Video Splitter Cable (Part No. 41219) to connect to your

monitor.

You can now install your LINDY KVM Switch Pro USB 2.0 Audio by following

the procedure as described below:

Step 1. Connect the power supply to the KVM switch before you connect any

other cables.

Step 2. Connect your keyboard, monitor and mouse to the USB and DVI ports on

the KVM switch labelled CONSOLE. Connect your speakers and microphone if

required.

Step 3. Connect your computers using the cables provided. Should you wish to

extend the operating distance then you may purchase suitable cables from

LINDY. Be advised that the maximum working distance for USB is 5m. If you

require a longer distance then please use the LINDY No. 42915 USB 2.0

Active Extension Cable (Part No. 42915).

Step 4. Turn on the power to all devices and computers.

Step 5. Your computer should now boot and detect the newly installed hardware.

A Windows operating system will detect and install multiple USB device drivers.

Please wait until this procedure has finally completed to ensure correct

operation. A Mac computer system may not identify a PC keyboard at the first

boot up and may show an identification menu; please follow the on screen

User Manual English

- 5 -

information. In some cases it may be nessacery to unplug the mouse and

keyboard and re-connect to allow the USB ports to re-detect.

It may also be necessary to reboot your computer with the mouse and

keyboard directly connected. Once the device drivers have installed correctly

you may remove the mouse and keyboard and connect them directly to the

KVM switch console port. The windows operating system includes all relevant

USB device drivers so no additional drivers are required to be installed.

KVM switching options

Computer port selection may be made by any of the following:

o Front panel push buttons on the switch

o Keyboard Hotkey – configurable by the user

Front panel push buttons with white/red LED indicators

Press the front push button to select the appropriate port/computer. During the

switching process a white LED behind the switch button will flash. The LED will

remain on when switching is completed and the connections are established.

Depending on the configuration only the KVM ports (USB keyboard, mouse and

monitor) or KVM and USB 2.0 hub and/or Audio ports are switched. To learn more

about these options, please refer to the table on the next page.

The white port LEDs refer to the KVM section status, the red port LEDs refer to

the USB 2.0 hub section status and shows the port/computer currently selected.

Keyboard Hotkey Switching

The KVM switch may also be conveniently switched and configured using

keyboard hotkeys. This process is invoked by pressing a universal hotkey on the

keyboard twice within 2 seconds. The factory default setting for this universal

hotkey is the SCROLL LOCK button. The KVM switch can be reconfigured to use

a different hotkey from the following list: NUM LOCK, or CAPS LOCK, or F12 or

Escape (ESC) key.

Press the universal hotkey twice to invoke the switching function – the KVM switch

will confirm this with a short beep signal. Depending on the next key you press

you can select any of the available switching or configuration functions of the KVM

switch. Please refer to the following table for the available options.

User Manual English

- 6 -

Hotkey Switching and Configuration Commands

* stands for the universal hotkey (factory default is SCROLL LOCK, configurable to new

hotkey ** NUM, CAPS, F12, or ESC key)

Fn1-Fn4 stands for the function keys F1, F2, F3, and F4

(#) To change the universal hotkey from the front push buttons please press the highest port

button until you hear two short confirmation beeps. Then press the chosen new hotkey

SCROLL, NUM, CAPS, F12, or ESC on your keyboard. The KVM switch will confirm this

by a short beep and the hotkey is permanently changed.

(Yes) When binding between KVM and USB 2.0 Hub and/or Audio ports is enabled, pressing

the front push button will switch all: KVM & USB hub & Audio. If binding is disabled for

Audio or the USB hub this will not be included for port switching

KVM Switch Pro USB 2.0 Audio

Command Hotkey Input Front

Binds KVM & Hub switching (Default, ) Z for QWERTY kb! * + * + Y Z (or )

Unbinds KVM & Hub switching * + * + X

Binds KVM & Audio switching (Default) * + * + Q

Unbinds KVM & Audio switching * + * + W

Switches directly to port 1, 2, 3 or 4 * + * + 1-4 Yes

Switches USB Hub to port 1, 2, 3 or 4 * + * + Fn1-Fn4 (Yes)

Switches Audio devices to port 1, 2, 3 or 4 * + * + Fn5-Fn8 (Yes)

Switches one port up * + * + ↓

↓↓

↓

Switches one port down * + * + ↑

↑↑

↑

Switches to the previous port * + * + ←

←←

←

Switches the Beep confirmation tone ON / OFF * + * + B

Switches the universal Hotkey to ** * + * + + ** H

Yes (#)

Switches to Autoscan * + * + S

Switches to Autoscan with port time 10s (1) to 100s (0) * + * + + S 0-9

Stops Autoscan Any key Yes

Product specificaties

Merk:	Lindy
Categorie:	Schakelaar
Model:	32321
Kleur van het product:	Zilver
Gewicht:	1000 g
Snoerlengte:	1.8 m
LED-indicatoren:	Ja
Connectiviteitstechnologie:	Bedraad
Maximum resolutie:	2048 x 1536 Pixels
Aansluitingen:	2x USB 2.0
Compatibele besturingssystemen:	Windows 2000/XP/Vista\nLinux\nMac OS
Afmetingen (B x D x H):	255 x 12 x 46 mm
Aansluiting video:	VGA
Aantal poorten:	4
Aansluiting toetsenbord:	USB
Aansluiting muis:	USB
Aantal computers:	4