Lightware DVI-OPT-RX220-PRO Handleiding

Lightware AV extender DVI-OPT-RX220-PRO

Lees hieronder de 📖 handleiding in het Nederlandse voor Lightware DVI-OPT-RX220-PRO (39 pagina's) in de categorie AV extender. Deze handleiding was nuttig voor 33 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/39

DVI-OPT-TX220-Pro

DVI-OPT-TX220-ST-Pro

DVI-OPT-RX220-Pro

DVI-OPT-RX220-ST-Pro

User’s Manual

Fiber Multimedia Extender



DVI-OPT-220-Pro series – User's Manual 2

Important Safety Instructions

Class I Apparatus Construction.

This equipment must be used with a mains power system with a

protective earth connection. The third (earth) pin is a safety feature,

do not bypass or disable it. The equipment should be operated only

from the power source indicated on the product.

To disconnect the equipment safely from power, remove the power

cord from the rear of the equipment, or from the power source. The

MAINS plug is used as the disconnect device, the disconnect device

shall remain readily operable.

There are no user-serviceable parts inside of the unit. Removal of the

cover will expose dangerous voltages. To avoid personal injury, do not

remove the cover. Do not operate the unit without the cover installed.

The appliance must be safely connected to multimedia systems.

Follow instructions described in this manual.

Replacing the AC fuse

Unplug the AC power cord from the device. Locate the AC fuse on the

rear panel. Replace only the AC fuse as indicated on the rear panel.

Connect the power cord to the switcher and to the AC power source.

Make sure the switcher is working properly.

Ventilation

For the correct ventilation and to avoid overheating ensure enough

free space around the appliance. Do not cover the appliance, let the

ventilation holes free and never block or bypass the ventilators (if any).

WARNING

To prevent injury, the apparatus is recommended to securely attach to

the oor/wall or mount in accordance with the installation instructions.

The apparatus shall not be exposed to dripping or splashing and that

no objects lled with liquids, such as vases, shall be placed on the

apparatus. No naked ame sources, such as lighted candles, should

be placed on the apparatus.

CAUTION AVIS

RISK OF ELECTRIC SHOCK

DO NOT OPEN

RISQUE DE CHOC ELECTRIQUE

NE PAS OUVRIR



Waste Electrical & Electronic Equipment

WEEE

This marking shown on the product or its literature,

indicates that it should not be disposed with other

household wastes at the end of its working life. To

prevent possible harm to the environment or human

health from uncontrolled waste disposal, please

separate this from other types of wastes and recycle it

responsibly to promote the sustainable reuse of material

resources. Household users should contact either the

retailer where they purchased this product, or their local government

ofce, for details of where and how they can take this item for

environmentally safe recycling. Business users should contact their

supplier and check the terms and conditions of the purchase contract.

This product should not be mixed with other commercial wastes for

disposal.

Caution: Laser product

INVISIBLE LASER RADIATION

AVOID DIRECT EYE EXPOSURE

CLASS 3R LASER PRODUCT

Radiated wavelengths:

778 nm, 800 nm, 825 nm, 850 nm

Output power <= 1mW

Classified by EN 60825-1:2008

Common Safety Symbols

Symbol Description

Alternating current

Protective conductor terminal

Caution, possibility of electric shock

Caution

Laser radiation









DVI-OPT-220-Pro series – User's Manual 3

Symbol Legend

The following symbols and markings are used in the document:

WARNING! Safety-related information which is highly

recommended to read and keep in every case!

ATTENTION! Useful information to perform a successful procedure;

it is recommended to read.

INFO: A notice which may contain additional information. Procedure

can be successful without reading it.

DEFINITION: The short description of a feature or a function.

TIPS AND TRICKS: Ideas which you may have not known yet but can

be useful.

Navigation Buttons

Go back to the previous page. If you clicked on a link previously,

you can go back to the source page by clicking the button.

Navigate to the Table of Contents.

Step back one page.

Step forward to the next page.









Document Information

All presented functions refer to the indicated products. The descriptions

have been made during testing these functions in accordance with the

indicated Hardware/Firmware/Software environment:

Item Version

Lightware Device Controller (LDC) software 1.22.1

Lightware Bootloader Software 3.3.2

Controller rmware

DVI-OPT-TX220-Pro, DVI-OPT-TX220-ST-Pro 1.1.8

Controller rmware

DVI-OPT-RX220-Pro, DVI-OPT-RX220-ST-Pro 1.1.3

Hardware

DVI-OPT-TX220-Pro, DVI-OPT-TX220-ST-Pro 3.2

Hardware

DVI-OPT-RX220-Pro, DVI-OPT-RX220-ST-Pro 3.1

Document revision: v.2.0

Release date: 22-06-2018

Editor: Judit Barsony







Product specificaties

Merk:	Lightware
Categorie:	AV extender
Model:	DVI-OPT-RX220-PRO
Kleur van het product:	Zwart
Gewicht:	1340 g
Breedte:	221 mm
Diepte:	181 mm
Hoogte:	42.2 mm
Soort:	AV-receiver
LED-indicatoren:	Ja
Aan/uitschakelaar:	Ja
Connectiviteitstechnologie:	Bedraad
Ondersteunde video-modi:	1080p
Maximum resolutie:	1920 x 1200 Pixels
Certificering:	CE
Materiaal:	Metaal
Ondersteunde grafische resoluties:	640 x 480 (VGA), 1920 x 1200 (WUXGA)
Temperatuur bij opslag:	-40 - 85 °C
Rack-montage:	Ja
DVI output ports:	2
RS-232 uitgangspoorten:	1
Bandbreedte:	1.65 Gbit/s
Maximaal bereik:	2500 m
AC-ingangsspanning:	100 - 240 V
AC-ingangsfrequentie:	50 - 60 Hz
Bedrijfstemperatuur (T-T):	0 - 55 °C
Relatieve vochtigheid in bedrijf (V-V):	10 - 90 procent
Vezel-optische connector:	LC
Draad modus structuur:	Multimode
Extended display identification data (EDID):	Ja
Ondersteunde golflengten:	850 nm
Stroomverbruik (RX):	4 W
Budget optisch verlies:	8 dB
Bedieningspaneel aan de voorzijde (RX):	Ja
EDID-geheugen (TX):	Ja
EDID-emulatie (TX):	Ja
OMA-ontvanger gevoeligheid:	-14.25 dBm