LG GR-B410RQHL Handleiding

LG Koelkast GR-B410RQHL

Lees hieronder de 📖 handleiding in het Nederlandse voor LG GR-B410RQHL (28 pagina's) in de categorie Koelkast. Deze handleiding was nuttig voor 12 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/28
P/NO : MFL68489001
ENGLISH FRENCH ARABIC
3
10
11
13
22
23
25
25
27
Lamp Replacement
Green Ion Door Cooling /
Ice Beam Door Cooling (Optional)
Inverter On feature (Optional)
WARNING
Keep ventilation openings, in the appliance enclosure or in
the built-in-structure, clear of obstruction.
Do not use mechanical devices or other means to accelerate
the defrosting process, other than those recommended by the
manufacturer.
Do not damage the refrigerant circuit.
Do not use electrical appliances inside the food storage
compartment, unless they are recommended by the
manufacturer.
The refrigerant and insulation blowing gas used in the
appliance requires special disposal procedures. When
disposal, please consult with services agent or a similarly
qualified person.
This appliance contains a small amount of isobutane refrigerant
(R600a), natural gas with high environmental compatibility, but it is
also combustible. When transporting and installing the appliance,
care should be taken to ensure that no parts of the refrigerating
circuit are damaged. Refrigerant squirting out of the pipes could
ignite or cause an eye injury. If a leak is detected, avoid any naked
flames or potential sources of ignition and air the room in which the
appliance is standing for several minutes.
Never startup an appliance showing any signs of damage. If in
doubt, consult your dealer.
If gas used is R600a
Do not use or store
inflammable materials like
ether, benzene, alcohol,
medicine, LP gas, spray or
cosmetics
near or in the
refrigerator.
It may cause
explosion or fire.
Inverter-On feature (Optional)
Minimum requirement: UPS/ Inverter
should be in ON condition having
minimum 600VA capacity along with
minimum 120Ah capacity battery
connected with the refrigerator’s
power supply socket.
Green Ion Door
Cooling / Ice
Beam Door
Cooling (Optional)
When the Freezer compartment is not enough cold in winter, adjust the control for the freezer to High
(4/5/ / )
For achieving temperature in Freezing , Energy and Storage Test, Freezer control may be required to set at
or ● ●●
●●
‘3’ or ‘4’
Use this function when calling the Customer Call Centre and receive precise diagnosis when the
Refrigerator malfunctions or fails. Use it only when advised by the consultant and not otherwise.
SMART DIAGNOSIS (Only for Selected External Micom Models)
1. Open all the doors of the refrigerator.
2. Press the refrigerator control (REF
TEMP) button for 3 sec or more.
3. If the buzzer sounds 4 times (Frequency
of SDS Buzzer is 2000Hz, 0.2sec Off/
0.2sec On 4 times) place the phone near
the speaker hole in the top right hand
side door hinge.
4. Ensure the microphon e of the
telephone is towards the speaker hole.
CAUTION
The transmission sound may be irritating.
Do not take away the telephone until the sound
stops for good diagnosis.
Smart diagnosis function is...
Use this function when calling the Customer Call Centre and receive precise diagnosis when the
Refrigerator malfunctions or fails. Use it only when advised by the consultant and not otherwise.
How to use the function
Be aware!
Difference of the regional call qualities may have influence on the function.
If you use home phone, better communication performance will enable much better service.
Smart diagnosis data transmission may not be successful if the call is made from a mobile phone
with poor network reception.
First, call LG service center. Only use the Smart Diagnosis feature when instructed to do so by the LG
call center agent.
5. Do not take away the telephone while
data is being transmitted.
6. During the data transmission for smart
diagnosis, hold the telephone 10cm
away from the speaker hole and avoid
any background noises. After inputting
SDS, SDS buzzer will ring. After
completion of the data transmission,
the consultant will explain the result of
the smart diagnos is and advice
a c c o r d i n g l y. W h e n t h e d a t a
transmiss ion is co mple ted, th e
refrigerator will be automatically turned
off and on a few seconds later.
SMART DIAGNOSIS (Only for Selected Internal Micom Models)
LED PATTEN DURING INVERTER-ON MODE (OPTIONAL)
During the use of this feature, you will find this pattern of LED running. It is a symbol
that the product is running at basic energy requirement. One can press the button “REF
TEMP” to change the LED setting during power cuts, if needed. The LED will then show
the setting as desired. When the mode is changed from Normal supply to Inverter mode
& vice versa, the LED pattern will take some time to display the change.
LAMP REPLACEMENT
NOTE : This product applies LED Lamp which cannot be replaced
by the user. Please contact authorized service centre for
the lamp replacement.
INVERTER-ON FEATURE (Optional)
1. While using this feature, the refrigerator will work on basic requirement as required by
the product.
2. The results of the Inverter-On feature may vary depending on the number of appliances
that are running on inverter.
3. For optimum running of refrigerator during Inverter-On mode, it is recommended to
switch off the other appliances which are not in use.
4. It is recommended to confirm the quality of food items before consumption.
5. Ice cream etc. may get soften during the use of this feature, if situation arises so, it is
recommended to change the setting as per one’s choice.
23
SUPPLY CORD
REPLACEMENT
If the supply cord is damaged, it
must be replaced by the
manufacturer or its service agent
or a similarly qualified person in
order to avoid a hazard.


Product specificaties

Merk: LG
Categorie: Koelkast
Model: GR-B410RQHL

Heb je hulp nodig?

Als je hulp nodig hebt met LG GR-B410RQHL stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Koelkast LG

Handleiding Koelkast

Nieuwste handleidingen voor Koelkast