LG F1403TD5 Handleiding

LG Wasmachine F1403TD5

Lees hieronder de 📖 handleiding in het Nederlandse voor LG F1403TD5 (4 pagina's) in de categorie Wasmachine. Deze handleiding was nuttig voor 37 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

1 2

3 4

60 - 100 cm

• Water supply is not adequate in

area

• Water supply taps are not

completely open.

• Water inlet hose(s) are kinked.

• The filter of the inlet hose(s) are

clogged.

• Drain hose is kinked or clogged.

• The drain filter is clogged.

• Load is too small.

• Load is out of balance.

• The appliance has an unbalance detection

and correction system. If individual heavy

articles are loaded (ex. bath mat, both robe,

etc.), this system may stop spinning or even

interrupt the spin cycle altogether.

• If the laundry is still too wet at the end of the

cycle, add smaller articles of laundry to

balance the load and repeat the spin cycle.

• Is the door opened or not

completely closed?

• Water overfills due to the faulty water

valve.

• Water level sensor has malfunctioned.

• Over load in motor.

• The washer experienced a power failure.

Check another tap in the house.

Fully open tap.

Straighten hose(s).

Check the filter of the inlet hose(s).

Clean and straighten the drain hose.

Clean the drain filter.

For more detailed information,

please refer to “Cleaning the drain pump filter”

Add 1 or 2 similar items to help

balance the load.

Rearrange load to allow proper

spinning

Close the door completely.

If “ ”is not released, call for service.

Unplug the power plug and call for service.

Close the water tap.

Unplug the power plug.

Call for service.

Restart the cycle.

Green and

Yellow (Earth)

Brown(Live)

Blue(Neutral) Fuse

Cord

grip

Owner s Manual‘

F1403TD(1~9)

WD-16855TDK

Safety instructions for use

Read all instructions and explanations of the installation before use. Follow the instructions carefully. Keep the operating

instructions handy for later use. If the appliance is sold or passed on then ensure that the new owner always receives these

operating instructions. The following warnings must be strictly observed for safety reasons. They must be read before instal-

ling the appliance and putting it into operation.

• Intended use: This appliance has been designed exclusively for use in dry-interior households. Use the appliance only with cold

drinking water and only for washing textiles with washing detergents designed for washing machines. Every other use is improper and

may lead to injuries, whereby the liability of the manufacturer will cease.

• This appliance may only be used by adults. Do not allow children to touch the controls or to play with the product.

• Never modify the appliance on your own, as this is dangerous.

• This appliance is heavy. Transporting with care.

• Remove all packaging and transport bolts before using the appliance. Otherwise serious damage may result.

• All installation work must be carried out by a qualiﬁ ed ﬁ tter or technician.

• Have electrical connections done by a qualiﬁ ed electrician.

• Never place the appliance on the power cord.

• If the appliance is placed on a carpet then place the feet so that air can circulate underneath the appliance.

• Always unplug the machine and turn off the water supply after use. Disconnect appliance by pulling only the plug - never disconnect

by pulling the power cord. Never touch the plug with wet ﬁ ngers or hands.

• Do not overload the appliance.

• Wash only machine-washable textiles. If you have doubts regarding this, then observe the markings on the label.

• Never place electrical heaters, candles etc. in the vicinity of the appliance. They could cause the appliance to ignite or parts to warp.

• Protect the appliance from wet and damp. Otherwise, there is danger of electric shock and ﬁ re.

• Connect the appliance to a suitable wall socket for 220-240V. Never use an extension cord or double adapter.

• Empty all pockets. Hard or sharp objects such as coins, needles, nails, screws or stones may cause serious damage.

Unbalanced mass may create heavy vibrations. If heavy vibrations remain also without load, call for an authorized customer service.

• Do not wash or dry articles that have been cleaned in, washed in, soaked in, or dabbed with combustible or explosive substances

(such as wax, oil, paint, gasoline, degreasers, dry-cleaning solvents, kerosene, etc.). This may result in ﬁ re or explosion.

• Never insert products coated with mineral oils (e.g. nylon coating, plastic belts, etc. ) into the machine. If a stain remover has been

used then make sure that the solvent has been carefully washed out before inserting the clothes into the appliance. Oil may remain in

the tub after a whole cycle resulting in ﬁ re during drying. So, do not load oily clothes.

• Do not operate the appliance at locations where ﬂ ammable substances are present such as oil, benzene or highly inﬂ ammable gas.

Such materials may cause ﬁ re or explosion. Never use combustible detergents.

• Only add the prescribed amount of softener. Excessive amounts may damage the clothes.

• After washing, keep the drum door open to protect the door seal.

• Make sure that all water has run off before opening the door. Never open the door if water still remains. Danger of scalding.

• Animals and children may get into the washing machine. So always check the appliance before using it.

• During washing, the glass door becomes very hot. Keep children away from the appliance when in operation.

• Never try to repair the machine yourself. Incorrect repairs may result in injuries and/or serious defects to the machine.

• The product should be serviced and repaired only by the authorised customer service using original replacement parts.

• When disposing of your old machine, the power cable must be capped and the door lock must be made unusable in order to protect children.

• When placing on a carpeted ﬂ oor, make sure that the opening in the socket is not blocked.

• If the appliance has been under water then contact the customer service. There is danger of electric shock and ﬁ re.

• The cover cup of the ﬁ lter as well as the dispenser drawer may not be opened during the operation.

• Keep all washing powder and detergents away from children. Danger of poisoning.

Disposal

Before use please read carefully the safety instructions!

Thank you for buying an LG fully automatic washing machine.

Please read this owner‘s manual carefully, it provides instructions on safe installation, use and maintenance.

Keep it handy for future reference of this machine. Make a note of the model and serial numbers of your washing machine.

Remove Packaging

Requirements for installation site

Transit bolts

Electrical connection

Connecting water supply hose

• The appliance is ﬁ tted with transit bolts to prevent internal

damage during transport. Be careful, heavy load!

• Packing and all transit bolts must be removed before using

the washing machine.

• When unpacking the base, be sure to remove the additional

packing support in the middle of the base packing.

Store original packing for future move.

Dispose of packing material according to local regulations.

Unscrew the 4 bolts

using the spanner

supplied.

Level ﬂ oor: Permissible ﬂ oor gradient under entire washing machine

is 1˚ .

Power socket: Must be within 100 cm of either side of location of

washing machine. Do not overload the socket with more than one

appliance.

Additional Clearance: For wall, ﬂ oor and door space is needed.

(10cm: rear / 2cm:right & left side). Do not place or store laundry pro-

ducts on top of the washing machine at any times. They can damage

the ﬁ nish or controls of the machine.

• Two rubber seals are supplied with the water inlet

hoses. They are used for preventing water leaks.

• Make sure the connection to taps is tight enough.

• Periodically check the condition of the hose and

replace the hose if necessary.

• Make sure that there is no kink on the hose and

that it is not crushed.

Water supply pressure must be between 1.0-10 bar (100kPa~1000kPa)

Don’t strip or crossthread when connecting inlet hose to the valve.

If the water supply pressure is more than 1000kPa, a decompression

device should be installed.

• The drain hose should not be placed higher than 100 cm above the ﬂ oor.

• Proper securing of the drain hose will protect the ﬂ oor from damage due to any water leakage.

• If the drain hose is too long do not force back into the washing machine. This will cause unusual noise.

• Proper level-adjustment of the washing ma-

chine prevents excessive noise and vibration.

Install the appliance on a solid and level ﬂ oor

surface, preferably in a corner of the room.

• If the ﬂ oor is uneven, adjust feet as required.

(Do not insert pieces of wood etc. under the

feet). Make sure that all four feet are stable

and resting on the ﬂ oor. Then check that

the appliance is perfectly level. (Use a spirit

level).

Safety instuctions for the installation

CAUTION about positioning the appliance

CAUTION about the power cord

CAUTION about location and moving

CAUTION about the ﬂ oor surface

Rattling and clanking noise Extraneous objects such as coins or safety pins maybe in drum or pump.

Thumping sound Heavy wash loads may produce a thumping sound. This is usually normal.

Vibrating noise Have all transit bolts and packing been removed?

Water leaks. Check and tighten hose connections. Unclog drain pipe.

Contact plumber if necessary.

Excessive suds Too much detergent or unsuitable detergent.

Washing machine does not start Power cord may not be plugged in or connection may be loose.

Washing machine won’t spin Check that the door is ﬁ rmly shut.

Door does not open Once started, the door can not be opened for safety reasons.

Wait one or two minutes before opening the door to allow the electric

locking mechanism time to release.

Troubleshooting

Level adjustment

To prevent internal dama-

ge during transport, the

special 4 bolts are locked.

If they are not removed, it

may cause heavy vibrati-

on, noise and machine to

malfunction.

Installation of drain hose

Technical Speciﬁ cation

If after completing connection water leaks from the hose, repeat the same steps. Use the most conventional

type of tap for water supply. In case the faucet is square or too big, remove the spacing ring before inserting

the tap into the adaptor.

For the U.K. customer

CUSTOMER SERVICES Tel. : +44-(0) 844 847 LGLG(5454) Fax. : +44-(0) 844 847 1413

LGEUK SERVICE WEB-SITE : http://www.lge.co.uk

• When this crossed-out wheeled bin symbol is attached to a product it means the product is covered

by European Directive 2002/96/EC.

• All electrical and electronic products should be disposed of separately from municipal waste stream

via designated collection facilities appointed by the government or the local authorities.

• The correct disposal of your old appliance will help prevent potential adverse consequences for the

environment and human health.

• For more detailed information about disposal of your old appliance, please contact your city ofﬁ ce,

waste disposal service or the shop where you purchased the product.

The hose supplied with the machine must be used. Old hoses may not be reused

Close the holes with

the caps supplied.

Remove the 4 bolts

along with the rubber

bungs by slightly

twisting the bung.

P/No. :MFLMFL59755548

ABC

1 2 3 4 5

1 3

Program

Fabric Type Water Temp.

(Option)

Cotton

Lightly soiled clothing and

small loads

Cotton

Quick

Synthetic

Baby Care

Delicate

Quick 30

Duvet

Hand Wash

Wool

Color fast garments (shirts,

nightdresses, pajamas...)and

lightly soiled white cotton

(underwear)

Polyamide, Acrylic, Polyester

Lightly soiled baby wear

Delicate laundry easily

damaged

“Hand wash” marked delicate

and wool laundry

Machine washable woolens

with pure new wool only

Colored laundry which is lightly

soiled fast

Cotton bedding with filling duvet,

pillow, blanket, sofa cover with

light filling

- Time Delay

- Intensive

- Soak

- Pre Wash

- Crease Care

- Rinse+Spin

- Medic Rinse

- Time Delay

- Intensive

- Crease Care

- Rinse+Spin

1 king size (9 Tog)

60°C

(Cold, 30°C,

40°C, 95°C)

Rating

Less than 2.0kg

Less than 4.5kg

Less than 4.0kg

Less than 6.0kg

40°C (Cold,

30°C, 60°C)

30°C

(Cold, 40°C)

30°C

(Cold, 40°C)

40°C

(Cold, 30°C)

40°C

(Cold, 30°C)

60°C

(40°C, 95°C)

Maximum LoadOption

1 2 3 4 5

INSERT PLUS INTO THE MAINS SOCKET

Never touch the plug with wet hands!

Never remove the plug from the

socket by pulling on the cord.

HANG UP WASTE WATER HOSE

Hose elbow connection e.g. attach to water tap

WATER CONNECTION

Turn on the water tap

CHECKING THE MACHINE

Never use a defective machine! In case of any

failure, first unplug the machine and turn off the

water

tap.

DOING LAUNDRY AND USING MACHINE

WITH CARE

- empty all pockets

- remove all metal parts

- place the delicate textiles into the laundry net

- close zippers

WATER TREATMENT

- with hardness III water

- use water softening agent

DRUM CARE

- remove extraneous objects

- leave door open to dry the drum

- check the rubber seals regularly

ECOLOGICAL WASHING

- make use of the max. washing quantity

- do not “pre wash” if possible

- use short program if possible

LAUNDRY WITH DIFFERENT AMOUNTS OF

SOILING

- wash new textiles separately

- do not prewash

- pretreat dirty spots

- pre wash

Sort the laundry

note washing instruction symbols -

Degree of soiling -

Type of textile / colour -

Fill the drum

Check the folds of the flexible gasket (grey) -

and remove any small articles, if any. .

Check inside of the drum and remove -

any left in items for next wash cycle. .

Remove any clothing or items on the flexible gasket -

to prevent clothing and the gasket damages .

Fill detergent

Refer to the

written information

on the detergent's packing

Turn the machine ON

by pressing the Power button

Select a

Program

Select the

Spinning speed

Select an Option

Pre Wash / Soak / Crease Care / Rinse+Spin

Select Rinse mode

and Washing temperature

4 additional programs

Press Start / Pause

to start the washing process

Turn off tap

- close water supply

- clean the machine

- unplug machine

Additional Steps

- Turn the machine off

- leave door open to

allow drum to dry

Remove laundry

- open the door

- remove the laundry

Wait t until washing

Time Delay / Favorite / Intensive / Medic Rinse

Main Wash

For very dirty clothes fill 1/4 of the

portion of detergent in here and

select a prewashing programm

Softener

Do not exceed the MAX-Level.

Highly densed softeners are to

be diluted with some water.

Pre Wash

For normal dirty clothes use a small

amount of detergent. Don't pre wash.

Mount the level plate to use fluid detergents.

Dry ﬂ at

Do not bleach

Handy to bleach

Do not

tumble dry

Hang to dry

Drip dry

Medium hot

ironing

Hot ironing

Do not iron

Washing

temperature

Do not wash

Luke warm ironing

Turn off the water

tap

Unscrew the water

inlet hose

Pull out the water

inlet filter

Clean the filter using

a hard bristle brush

Pull out the

dispenser drawer

Clean the dispenser

drawer under flow-

ing water

Clean inside the

recess with an old

toothbrush

Insert the dispenser

drawer

Cleaning the water inlet ﬁ lter

Cleaning the dispenser drawer

Open the lower cover

cap. Drain plug to

pull out the hose

Unplug the drain plug.

Then open the filter

by turning to the left

Remove any

extraneous matter

from the pump filter

After cleaning, turn

the pump filter and

insert the drain plug

Time Delay

Setting “Time Delay” determines when machine stops.

How to set “Time Delay”

- Press button.Power

- Turn the dial to select the program you require.Program

- Press button and set time required.Time Delay

- Press the button.Start/Pause

Favorite

- Favorite program allows you to store a customized wash cycle for future use.

- To make a Favorite program:

(1) Select a cycle.

(2) Select

The course, washing method, number of rinses, spin speed, water temperature etc.

(3) Press and hold Favorite program button 3 seconds (2 beep sounds).

The Favorite program is now stored for future use.

To reuse the program, select Favorite program and press Start/Pause.

Intensive

If the laundry is heavily soiled “Intensive”option is effective.

- By selecting the Intensive option, the washing duration may be extended,

depending on the program selected.

- To use this option, press the intensive button once before the wash program is started.

Medic Rinse

For best results or for cleaner rinsing, select the “Medic Rinse” option.

Available in the Cotton, Cotton Quick, Synthetic and Baby Care programs.

Medic Rinse is set by default in the Baby Care program.

The respective temperature indicator will light up.

Spinning cycle

Temperature

Rinse

Options

Start / PauseProgram Cycle

Power button

Drum

Dispenser

drawer

Cover cap

Control panel

Washing program table

Additional programs Child Lock

Tub Clean

To activate:

press and hold

the Option buttons

simultaneously

To deactivate:

press and hold

the Option buttons

simultaneously

Change to the desired program, whilst in child lock mode:

Empty the drum

completly and close

the door

Add anti-limescale

(Calgon) to the main

wash compartment.

Close the disp. drawer

Power ON with

Then press and

hold Rinse and

Temp. button

Press the

Start/Pause

button to start Tub

Clean process

After the cycle is

complete, leave the

door open to dry

Select this function to lock the buttons on the control panel and to prevent tampering.

Press and hold

the Option buttons

simultaneously

Press

Start/Pause

Select the desired

program

Press

Start/Pause

TUB CLEAN is special cycle to clean the inside of the washing machine.

A higher water level is used in this cyle at higher spin speed. Perform this cycle regularly.

Preparation

lightly

heavily

Tighten up the inlet

hose

Cleaning the drain pump ﬁ lter

Close the lower

cover cap

Washing symbols

Dispenser drawer

Once you

have finished

cleaning, replace

the drawer and

run a rinse cycle

without laundry.

Cleaning and Maintenance

Warning: Before cleaning the washing machine interior, unplug the electrical power cord to avoid the risk of electric shock.

DisplayAdditional programs

3 sec.

Exterior

Proper care of your washing machine can extend its service life. The

outside of the machine can be cleaned with warm water and a neutral

non-abrasive household detergent. Immediately wipe off any spillage.

Wipe with damp cloth. Avoid striking the surface with sharp objects. Never

hose down the machine!

Interior

Dry around the washing machine door

opening, flexible gasket and door glass.

Run washing machine through a complete

cycle using hot water. Repeat process if

necessary.

Cleaning in general Important: Do not use methylated spirits, solvents or similar products.

Water Temperature: Select water temperature to suit wash cycles. Always follow garment manufacture’s care label or instructions when washing.

Intensive: If the laundry is heavily soiled “Intensive” option is effective.

Set program at “Cotton 60°C + Intensive” option for test in accordance or in conformity with IEC60456 and EN60456.

Pre Wash: If the laundry is heavily soiled, “Pre Wash” Cotton is recommended. Pre Wash is available in the Cotton, Cotton Quick, Synthetic and Baby Care program.

Crease Care: If you want to prevent creasing, select Crease Care option.

Medic Rinse: For best results or for cleaner rinsing, you can choose Medic Rinse option. Medic Rinse is set by default in the Baby Care program.

3 sec.

The Beep on/off function can be set only during the washing cycle.

1. Press button.Power

2. Press the button.Start/Pause

3. Press and hold the and button simultaneously for three seconds to set Beep on/off function. Option Rinse

Once the Beep on/off function is set, the setting is memorized even after Power is off.

Beep on / off

The wool wash cycle of this machine has been approved by Woolmark for the washing of machine washable Woolmark products provided that the products are