LG 17BR30T Handleiding

LG Monitor 17BR30T

Lees hieronder de 📖 handleiding in het Nederlandse voor LG 17BR30T (17 pagina's) in de categorie Monitor. Deze handleiding was nuttig voor 66 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/17
www.lg.com
Please read this manual carefully before operating
your set and retain it for future reference.
*LG LED Monitors are LCD Monitors with LED Backlighting.
LED LCD MONITOR MODEL
17BR30T
OWNER'S MANUAL
LED LCD Monitor
(LED Monitor*)
2
ENGLISH
CONTENTS
CONTENTS
3 ASSEMBLING AND PREPAR-
ING
3 Supported Drivers and Software
4 Parts and buttons
5 Moving and Lifting the Monitor
6 - Basic Adjustment
7 USING THE MONITOR SET
7 Connecting to a PC
7 - D-SUB connection
7 - To Use Touch Screen
8 CUSTOMIZING SETTINGS
10 Customizing Settings
10 - Menu Settings
11 READER Setting
12 - SMART ENERGY SAVING
13 TROUBLESHOOTING
15 SPECIFICATIONS
16 Preset Modes (Resolution)
3
ENGLISH
ASSEMBLING AND PREPARING
ASSEMBLING AND PREPARING
CAUTION
NOTE
Supported Drivers and Software
You can download and install the latest version from the LGE website (
www.lg.com
).
Drivers and Software Installation Priority
Monitor Driver Recommended
OnScreen Control Recommended
yAlways use genuine components to ensure safety and product performance.
yThe product warranty will not cover damage or injury caused by the use of counterfeit components.
yIt is recommend that use the supplied components.
yIf you use generic cables not certified by LG, the screen may not display or there may be image
noises.
yIllustrations in this document represent typical procedures, so they may look different from the actual
product.
yDo not apply foreign substances (oils, lubricants, etc.) to the screw parts when assembling the prod-
uct. (Doing so may damage the product.)
yApplying excessive force when tightening screws may cause damage to the monitor.
Damage caused in this way will not be covered by the product warranty.
yDo not carry the monitor upside down by just holding the base. This may cause the monitor to fall off
the stand and could result in personal injury.
yWhen lifting or moving the monitor, do not touch the monitor screen. The force applied to the monitor
screen may cause damage to it.
yFor wave pattern on appearance, unlike the general method of coating, it’s applied to added glitter-
ing material in raw material.With no peeled-off appearance, it has good durability. Please use it with
confidence because there is no problem in using the product at all.
yNote that the components may look different from those shown here.
yWithout prior notice, all information and specifications in this manual are subject to change to im-
prove the performance of the product.
yTo purchase optional accessories, visit an electronics store or online shopping site or contact the
retail store where you purchased the product.
yThe power cord provided may differ depending upon the region.
4
ENGLISH
ASSEMBLING AND PREPARING
Parts and buttons
Power Indicator
y LED On : Power is on
y LED Off : Power is off
5
ENGLISH
ASSEMBLING AND PREPARING
Moving and Lifting the Monitor
When moving or lifting the monitor, follow these instructions to prevent the monitor from being scratched or
damaged and to ensure safe transportation, regardless of its shape or size.
yPlace the monitor in the original box or packing material before attempting to move it.
yBefore moving or lifting the monitor, disconnect the power cord and all other cables.
yHold the bottom and side of the monitor frame firmly. Do not hold the panel itself.
yWhen holding the monitor, the screen should face away from you to prevent it from being scratched.
yWhen transporting the monitor, do not expose the monitor to shock or excessive vibration.
yWhen moving the monitor, keep it upright and never turn the monitor on its side or tilt it sideways.
yAvoid touching the monitor screen as much as possible.
- This may result in damage to the screen or some of the pixels used to create images.
yIf you use the monitor panel without the stand base, its joystick button may cause the monitor to
become unstable and fall, resulting in damage to the monitor or human injury. In addition, this may
cause the joystick button to malfunction.
CAUTION
6
ENGLISH
ASSEMBLING AND PREPARING
Basic Adjustment
1 Adjust the angle of the panel as follows.
How to adjust the angle of the panel
■ Tilt Range : 15° to 66°
■ Push back the panel to the end, and use from the point that it automatically returns.
After installing the monitor, adjust the angle as follows.
The state which the stand
locking handle is released
The state which the stand
locking handle is locked
2After adjusting the angle of the panel for convenience, lock with the locking
handle to prevent the product from moving.
Do not push the stand with basic
adjustment to the direction of the
panel. The product may fall down
to hurt people, or cause product
disorder or screen damage.
Stand
Panel
7
ENGLISH
USING THE MONITOR SET
USING THE MONITOR SET
Connecting to a PC
yYour Monitor set supports Plug & Play*.
*Plug & Play: A PC recognizes a connected
device that users connect to a PC and turn
on, without device configuration or user
intervention.
D-SUB connection
Transmits analog video from your PC to the
Monitor set. Connect the PC and the Monitor set
with the supplied D-sub 15 pin signal cable as
shown in the following illustrations.
yMac adapter
For Apple Macintosh use, a separate plug
adapter is needed to change the 15 pin
high density (3 row) D-SUB VGA connector
on the supplied cable to a 15 pin 2 row
connector.
yWhen using a D-Sub signal input cable
connector for Macintosh
NOTE
yYou can download and install the latest
version from the LGE website (www.lg.com).
yYour purchased product and its accessories
may look different from the items illustrated
in this manual.
NOTE
NOTE
To Use Touch Screen
1) Connect the USB cable for the touch screen as
shown below.
2) Execute the touch screen calibration.
3) Set "Double Click" function.
4) For details, refer to the touch screen user's
manual.
< USB cable for the touch screen >
Power
Cord
Analog
signal
D-sub
Touch
Screen
USB Cable
Touch Screen
USB Cable
8
ENGLISH
CUSTOMIZING SETTINGS
CUSTOMIZING SETTINGS
1 Press the desired button on the bottom of the Monitor set.
2 Change the value of the menu item by pressing the buttons on the bottom of the Monitor set.
To return to the upper menu or set other menu items, use the up arrow ( ) button.
3 Select EXIT to leave the OSD menu.
Monitor set Buttons
10
ENGLISH
CUSTOMIZING SETTINGS
Customizing Settings
Menu Settings
Menu Description
Brightness To adjust the brightness of the screen .
Contrast To adjust the contrast of the screen.
Reset Restore all factory default settings. Press the
, buttons to reset immediately.
Menu > Next Menu > Picture Description
Sharpness To adjust the clearness of the screen.
Menu > Next Menu > Color Description
Gamma Set your own gamma value. : Gamma 0, Gamma 1, Gamma 2 on the monitor, high
gamma values display whitish images and low gamma values display blackish
images.
Color Temp Custom
• Red:Set your own red color levels.
• Green: Set your own green color levels.
• Blue:Set your own blue color levels.
Select the screen color.
Warm: Set the screen to warm color temperature (more red).
Medium: Set the screen to medium color temperature.
Cool: Set the screen to cool color temperature (more blue).
Menu > Next Menu > Display
(Only D-SUB)
Description
Horizontal To move image left and right.
Vertical To move image up and down.
Clock To minimize any vertical bars or stripes visible on the screen background.The
horizontal screen size will also change.
Phase To adjust the focus of the display. This item allows you to remove any horizontal
noise and clear or sharpen the image of characters.


Product specificaties

Merk: LG
Categorie: Monitor
Model: 17BR30T

Heb je hulp nodig?

Als je hulp nodig hebt met LG 17BR30T stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Monitor LG

Handleiding Monitor

Nieuwste handleidingen voor Monitor