Lexmark E120n Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Lexmark E120n (12 pagina's) in de categorie Printer. Deze handleiding was nuttig voor 42 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/12
Quick Reference
1
Quick Reference
Understanding the Operator Panel
The printer operator panel has two buttons and six lights (Continue is both a light and a button).
Lights indicate the status of the printer. Buttons are used to continue or cancel the current print job.
When the printer is turned on, all lights cycle as a self test is performed. Also, when the printer is
reset, or when a printer setting is changed in the menus, all lights cycle.
•Press and release Continue to resume printing.
•Press and release Continue twice quickly to display the secondary light sequence.
•Press and release Cancel to cancel the current job.
•Press and hold Cancel until all of the lights come on to reset the printer.
Understanding the operator panel lights
The operator panel lights mean different things, depending on their sequence. Lights that are off, on,
and/or blinking indicate printer conditions such as printer status, intervention, or service.
Use the light sequence table to find the message being indicated, then click the message for more
information.
Ready / Data
Toner Low/Replace PC Kit
Load / Remove Paper
Paper Jam
ContinueCancel
Error
Understanding the Operator Panel
2
Light sequence
Primary light sequence Secondary light sequence
Message
Continue
Ready / Data
Toner Low/Replace PC Kit
Load / Remove Paper
Paper Jam
Error
Continue
Ready / Data
Toner Low/Replace PC Kit
Load / Remove Paper
Paper Jam
Error
Ready/Power Saver
Busy
Resolution reduced
Waiting
Cancel job/Reset printer
Flushing buffer
Invalid engine code
Not ready
Printing font list or menus settings page
Programming engine code or system
code
Restoring factory defaults
Cartridge region mismatch
Missing cartridge/Defective cartridge
detected
Open door
Continue on =
Continue blinking =
Ready / Data on =
Ready / Data blinking =
Other panel lights on =
Other panel lights blinking =
Understanding the Operator Panel
3
Complex page
ENA connection lost
Insufficient collation area
Load media
Print side two of a duplex job
Memory full
Network interface errors
Host interface disabled
Jam at the input sensor
Jam between the input and exit sensors
Jam at printer exit sensor
Jam in Tray 1 / priority feeder
Resource save off
Short paper
Toner low
Long-life photoconductor kit life
warning
Replace long-life photoconductor kit
Unsupported toner cartridge
Service error
Primary light sequence Secondary light sequence
Message
Continue
Ready / Data
Toner Low/Replace PC Kit
Load / Remove Paper
Paper Jam
Error
Continue
Ready / Data
Toner Low/Replace PC Kit
Load / Remove Paper
Paper Jam
Error


Product specificaties

Merk: Lexmark
Categorie: Printer
Model: E120n
Gewicht: 6900 g
Kleur: Nee
Frequentie van processor: 183 MHz
Afmetingen verpakking (BxDxH): 485 x 29 x 325 mm
Certificering: FCC Class B, UL 60950-1 3rd Edition, U.S. FDA, IEC 320-1, CSA, ICES Class B, Energy Star, CE Class B, CB IEC 60950-1, IEC 60825-1, GS (TÃœV), SEMKO, UL AR, CS, TÃœV Rh, N Mark, ACA C-tick Class B, CCC Class B, BSMI Class B, MIC, EK Mark, PSB, VCCI
Intern geheugen: 16 MB
Duurzaamheidscertificaten: ENERGY STAR
Aansluitingen: Ethernet 10/100BaseTX (RJ-45)\nUSB
Mac-compatibiliteit: Ja
Netwerkfuncties: LPR/LPD, Direct IP (Port 9100), IPP, HTTP, Enhanced IP (Port 9400), FTP, TFTP
Maximale resolutie: 600 x 600 DPI
Hoogte, in bedrijf: 0 - 2500 m
Ondersteunde mediatypen: Card Stock, Envelopes, Paper Labels, Plain Paper, Transparencies
Printtechnologie: Laser
Printsnelheid (zwart, standaardkwaliteit, A4/US Letter): 19 ppm
Gebruiksindicatie (maximaal): 10000 pagina's per maand
Totale invoercapaciteit: 165 vel
Maximum invoercapaciteit: 165 vel
Totale uitvoercapaciteit: 50 vel
Maximale uitvoercapaciteit: 50 vel
Maximale ISO A-series papierformaat: A4
Tijdsduur tot de eerste pagina (zwart, normaal): 8 s
Ondersteunde network protocollen (IPv4): TCP/IP IPv4
Geluidsdrukniveau (afdrukken): 49 dB
Maximaal intern geheugen: 16 MB
Maximale printafmetingen: 210 x 297 mm
Standaardinvoerladen: 150
Afmetingen (B x D x H): 388 x 370 x 250 mm
Geluidsvermogens (stand-by): 26 dB
Bedrijfstemperatuur (T-T): 16 - 32 °C
Relatieve vochtigheid in bedrijf (V-V): 8 - 80 procent
Toner cartridge: 2000

Heb je hulp nodig?

Als je hulp nodig hebt met Lexmark E120n stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Printer Lexmark

Handleiding Printer

Nieuwste handleidingen voor Printer