LawnMaster HT2201 Handleiding
LawnMaster
Heggenschaar
HT2201
Lees hieronder de 📖 handleiding in het Nederlandse voor LawnMaster HT2201 (62 pagina's) in de categorie Heggenschaar. Deze handleiding was nuttig voor 44 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/62
22" 4.0A ELECTRIC HEDGE TRIMMER HT2201
TAILLE-HAIES ÉLECTRIQUE HT2201 4,0 A 558,8 mm (22 pouces)
Read all safety rules and instructions carefully before operating this tool.
Distributed By Cleva North America 601 Regent Park Court Greenville, SC 29607 (866)-384-8432
Lisez attentivement l’ensemble des règles de sécurité et les instructions avant d’utiliser cet appareil.
Distribué par Cleva North America 601 Regent Park Court Greenville, SC 29607 (866)-384-8432
Lea cuidadosamente todas las normas de seguridad e instrucciones antes de utilizar esta herramienta.
Distribuida por Cleva North America, 601 Regent Park Court, Greenville, SC 29607 (866)-384-8432
558.8 MM 4.0A CORTADORA DE ORILLAS ELÉCTRICA HT2201
MNL_HT2201_V1
EN p. 2
SP p. 42
Operators Manual / Mode D’emploi / Manual Del Operario
FR p. 21
3084514
Conforms to UL STD
60745-1 60745-2-15
Certified to CAN/CSA STD.C22.2 No.
60745-1-07, 60745-2-15-10
2
Contents.......................................................................................................................................2
Specifications..............................................................................................................................2
Important Safety Instructions..........................................................................................3-5
Specific Safety Rules.......................................................................................................5
Symbols.................................................................................................................................6-7
Know Your Hedge Trimmer ..........................................................................................10
Electrical..
.............................................................................................................................8-9
Assembly............................................................................................................................... 11
Operation..................................................................................................................................12-15
Maintenance....................................................................................................................
.....16
Troubleshooting .................................................................................................................... 16
Warranty ....................................................................................................................................17
Exploded View.......................................................................................................................... 18
Parts List....................................................................................................................... 19
Notes..............................................................................................................................20
CONTENTS
SPECIFICATIONS
22" 4.0A ELECTRIC HEDGE TRIMMER
Reciprocating Speed..............................................................................................3,200 SPM
Amp............................................................................................................................
4 A
Voltage
............................................................................................................
120 V~60Hz
Blade Length....................................................................................................... 22in. (55.8 cm)
Unit Weight...................................................................................................... 5.91 Ibs (2.68Kg)
Cutting Capacity.................................................................................................3/4in. (19mm)
3
IMPORTANT SAFETY INSTRUCTIONS
READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructions listed below may result
in electric shock, fire, and/or serious personal injury.
• Do not operate power tools in explosive atmospheres, such as in the presence of flammable
liquids, gases, or dust. Power tools create sparks which may ignitr the dust or fumes.
• To reduce the risk of electric shock, this tool has a polarized plug (one blade is wider than the
other). This plug will fit into the polarized wall outlet only one way. if the plug does not fit fully
into the wall outlet, reverse the plug. If the plug still does not fit, contact a qualified electrician to
install the proper wall outlet. Do not change the plug in any way.
• Avoid body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerators.
There is an increased risk of electric shock if your body is grounded.
• Don’t expose power tools to rain or wet conditions. Water entering a power tool will increase the
risk of electric shock.
• Do not expose to rain; store indoors.
• Do not handle plug or tool with wet hands.
•
Use outdoor extension cords marked W-A, W, SW-A, SOW-A, STW-A, STOW-A, SJW-A, SJTW-A,
or SJTOW-A. These cords are rated for outdoor use and reduce the risk of electric shock.
• Never allow children to operate the equipment. Never allow adults to operate the equipment
without proper instruction.
• Keep all bystanders, children, and pets at least 50 ft. away.
• Always wear safety glasses with side shields. Everyday glasses have only impact resistant
lenses. They are NOT safety glasses. Following this rule will reduce the risk of eye injury. Use
face mask if operation is dusty.
• Wear eye protection which is marked to comply with ANSI Z87.1 when operating this product.
• Use extra care when cleaning on stairs.
• Do not leave appliance plugged in. Unplug from outlet when not in use and before servicing.
• Use only as described in this manual. Use only manufacturer’s recommended attachments.
• Use only identical manufacturer’s replacement parts and accessories. Use of any other parts
may create a hazard or cause product damage.
• Keep hair, loose clothing, fingers and all body parts away from openings and moving parts.
• Secure long hair so it is above shoulder level to prevent entanglement in any moving parts.
• Wear heavy long pants, boots, and gloves. Avoid loose garments or jewelry that could get
caught in moving parts of the machine or its motor.
• Use non-slip, heavy-duty protective gloves when operating the hedge trimmer and when
installing or removing blades.
WARNING
READ THESE INSTRUCTIONS BEFORE USING THE HEDGE TRIMMER
Product specificaties
Merk: | LawnMaster |
Categorie: | Heggenschaar |
Model: | HT2201 |
Heb je hulp nodig?
Als je hulp nodig hebt met LawnMaster HT2201 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Heggenschaar LawnMaster
6 Januari 2024
6 Januari 2024
5 Januari 2024
5 Januari 2024
5 Januari 2024
4 Januari 2024
4 Januari 2024
4 Januari 2024
4 Januari 2024
4 Januari 2024
Handleiding Heggenschaar
- Heggenschaar Bosch
- Heggenschaar DeWalt
- Heggenschaar Karcher
- Heggenschaar WOLF-Garten
- Heggenschaar Al-ko
- Heggenschaar Atika
- Heggenschaar Batavia
- Heggenschaar Bavaria
- Heggenschaar Black Decker
- Heggenschaar Brandson
- Heggenschaar Budget
- Heggenschaar Dolmar
- Heggenschaar Echo
- Heggenschaar Efco
- Heggenschaar Einhell
- Heggenschaar Eurogarden
- Heggenschaar Ferm
- Heggenschaar Ferrex
- Heggenschaar Florabest
- Heggenschaar Flymo
- Heggenschaar Fuxtec
- Heggenschaar Gamma
- Heggenschaar Garden Feelings
- Heggenschaar Garden Groom
- Heggenschaar Gardena
- Heggenschaar Gardenline
- Heggenschaar Gartenmeister
- Heggenschaar Greenworks
- Heggenschaar Grizzly
- Heggenschaar Gude
- Heggenschaar Hanseatic
- Heggenschaar Hikoki
- Heggenschaar Hitachi
- Heggenschaar Hoberg
- Heggenschaar Homelite
- Heggenschaar Honda
- Heggenschaar Husqvarna
- Heggenschaar Hyundai
- Heggenschaar Kaaz
- Heggenschaar Kibani
- Heggenschaar Kingcraft
- Heggenschaar Kress
- Heggenschaar Levita
- Heggenschaar Lux Tools
- Heggenschaar Makita
- Heggenschaar McCulloch
- Heggenschaar Metabo
- Heggenschaar Milwaukee
- Heggenschaar Mr Gardener
- Heggenschaar Parkside
- Heggenschaar Pattfield
- Heggenschaar Powerpeak
- Heggenschaar Powerplus
- Heggenschaar Remington
- Heggenschaar Robust
- Heggenschaar Ryobi
- Heggenschaar Scheppach
- Heggenschaar Shindaiwa
- Heggenschaar Skil
- Heggenschaar Sterwins
- Heggenschaar Stiga
- Heggenschaar Stihl
- Heggenschaar Tanaka
- Heggenschaar Tel Sell
- Heggenschaar Texas
- Heggenschaar Toledo
- Heggenschaar Topcraft
- Heggenschaar Trotec
- Heggenschaar Varo
- Heggenschaar Vonroc
- Heggenschaar Worx
- Heggenschaar Yardforce
- Heggenschaar Zipper
- Heggenschaar Ozito
- Heggenschaar Black And Decker
- Heggenschaar Cocraft
- Heggenschaar Meec Tools
- Heggenschaar Cotech
- Heggenschaar Fieldmann
- Heggenschaar McGregor
- Heggenschaar Sun Joe
- Heggenschaar Challenge
- Heggenschaar Cramer
- Heggenschaar EGO
- Heggenschaar Grouw
- Heggenschaar Gtech
- Heggenschaar Hurricane
- Heggenschaar MacAllister
- Heggenschaar Maruyama
- Heggenschaar Sovereign
- Heggenschaar Spear & Jackson
- Heggenschaar CMI
- Heggenschaar Powerworks
- Heggenschaar Craftsman
- Heggenschaar Verto
- Heggenschaar G-Technology
- Heggenschaar Jonsered
- Heggenschaar Qualcast
- Heggenschaar Bestgreen
- Heggenschaar Baumr-AG
- Heggenschaar Martha Stewart
- Heggenschaar Mac Allister
- Heggenschaar Deltafox
- Heggenschaar Anova
- Heggenschaar Challenge Xtreme
- Heggenschaar Palmera
- Heggenschaar Proviel
- Heggenschaar Ergotools Pattfield
- Heggenschaar Maxbear
- Heggenschaar Yellow Garden Line
- Heggenschaar Turbo-Silent
Nieuwste handleidingen voor Heggenschaar
21 December 2024
17 December 2024
20 December 2024
17 December 2024
17 December 2024
5 December 2024
1 Oktober 2024
1 Oktober 2024
3 December 2024
1 December 2024