Lasko Summit DST100 Handleiding

Lasko Ventilator Summit DST100

Lees hieronder de 📖 handleiding in het Nederlandse voor Lasko Summit DST100 (5 pagina's) in de categorie Ventilator. Deze handleiding was nuttig voor 5 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/5
NEW 1/24 8DST100
CUSTOMER SERVICE:
Email: producthelp@lasko.com
Web: www.lasko.com
Our Customer Service team is available to assist you with product service questions and
replacement parts. Chat with us at www.lasko.com Monday-Friday 8am - 9pm EST (Valid in U.S.
and Canada only). Please have your model number available, as well as the type and style located
on the underside of your product.
Customer Service Dept.,
820 Lincoln Ave., West Chester, PA 19380
(Please do not send product to this location)
LIMITED WARRANTY
LASKO PRODUCTS, LLC LIMITED WARRANTY (VALID IN U.S. AND CANADA ONLY)
What this warranty covers: This product is warranted against defects in workmanship
and/or materials.
How long this warranty lasts: This warranty extends solely to the original purchaser of the product
and lasts for (1) one year from the date of the original purchase or until the original purchaser sells or
transfers the product, whichever occurs rst. Additionally, the warranty period can be extended to
(3) three years from the original date of purchase by successfully registering the product within the
rst year of purchase.
What Lasko will do: During the warranty period, Lasko will, at its sole option, repair or replace any
part or parts that prove to be defective or replace the whole product with the same or comparable
model. For all warranty claims, the product must be returned to Lasko Products, LLC at customer’s
expense with proof of purchase within the warranty period. Contact the Lasko customer service
department to obtain a Return Authorization (“RA”) Do not return products without an RA or the
warranty claim will not be processed.
What this warranty does not cover: This warranty does not apply if the product was damaged or
failed because of accident, improper handling or operation, shipping damage, abuse, misuse, or
unauthorized repairs made or attempted. This warranty does not cover shipping costs for the return
of products to Lasko for repair or replacement. Lasko will pay return shipping charges from Lasko
following warranty repairs or replacement.
Any and all warranties, expressed or implied (including, without limitation, any implied warranty of
merchantability), last one year from the date of original purchase or until the original purchaser of
the product sells or transfers the product, whichever rst occurs and in no event shall lasko’s liability
under any express or implied warranty include (i) incidental or consequential damages from any
cause whatsoever, or (ii) replacement or repair of any house fuses, circuit breakers or receptacles.
Notwithstanding anything to the contrary, in no event shall lasko’s liability under any express or
implied warranty exceed the purchase price of the product and any such liability shall terminate upon
the expiration of the warranty period.
Some states and provinces do not allow limitations on how long an implied warranty lasts, or the
exclusion or limitation of incidental or consequential damages, so these exclusions or limitations may
not apply to you. This warranty gives you speci c legal rights. You may also have other rights which
vary from state to state and province to province.
Proof of purchase is required before a warranty claim will be accepted.
NEW 1/24 1DST100
Have a Question? Need a Part?
Please Do Not Return Product to Store!
Chat with us at www.lasko.com
Monday-Friday 8am - 9pm EST
(Valid in U.S. and Canada only)
Register Your Product Today
Here is what you will receive:
Extended warranty to 3-years
Special offers on other Lasko Products
Streamlined Customer Support
*Register within the rst year to be eligible
for the extended warranty
40” Tower Fan
with CarbonX Filter
Model: DST100
Summit Series
Remote ControlCarbonX Filter
(Optional to use)
NEW 1/24 2DST100
IMPORTANT SAFETY INSTRUCTIONS
When using electrical appliances, these instructions and warnings
should always be followed to reduce the risk of re, electrical
shock and injury to persons:
Do not use this Fan to ventilate areas where ammable liquids or vapors are used, stored
or are present, including paints, gasoline, varnishes, oor re nishing products or solvents.
ALWAYS read and follow all warnings and instructions on the containers for these products!
Always be sure the plug ts tightly into the outlet. When plugs t loosely into outlets, they may slip
partially out of the outlet and create a poor connection. This may cause outlets to overheat and
create a potential re hazard. Outlets in this condition should be replaced by a quali ed electrician.
Always unplug the power cord when servicing, cleaning or moving the Fan. Do not use the ON/
OFF switch as the sole means of disconnecting power. Never leave children unattended when
the Fan is on or plugged in. Always turn o and unplug the fan when not in use.
Be certain that the power source for the Fan is 120V AC. Do not plug the Fan into 240V or other
power source.
The Blue Plug on your Lasko Fan is a safety feature. It contains a non-replaceable safety device
(fuse) that should not be removed or tampered with. To reduce the risk of re, electric shock and
personal injury, do not attempt to remove, replace, repair or tamper with the originally supplied
plug. If the Fan has stopped functioning, it may be due to the safety device incorporated
in this plug.
This fan has a polarized plug (one blade is wider than the other). This plug is designed to t into
the outlet only one way. Match the wide blade to wide slot in outlet and fully insert. Do not attempt
to bypass or defeat this safety feature. If the plug does not t in the outlet, consult a quali ed
electrician. The outlet may need to be replaced.
WARNING: To reduce the risk of re, electric shock, or injury to persons, do not use replacement
parts that have not been recommended by the manufacturer (e.g. parts made at home
using a 3D printer).
Avoid the use of extension cords, power strips, power taps, outlet style air fresheners or other
cord connected device, as these devices may overheat and cause a re hazard.
Do not operate any fan with a damaged cord or plug. Discard fan or return to an authorized
service facility for examination and/or repair.
Do not route power cord under rugs, carpets, runners or furniture. This may damage the cord or
cause it to overheat creating a re hazard.
Always place the fan on a stable, at, level surface while in operation to prevent the fan
from overturning.
Never insert or allow ngers or objects to enter grille openings while fan is in operation or injury
and/or damage to the fan may occur.
Do not block, cover or obstruct air ow to or from the fan while in operation.
Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or
similar coverings.
Do not route cord under furniture or appliances. Arrange cord away from tra c area and
where it will not be tripped over.
Never use a single extension cord to operate more than one fan or other electrical device.
Do not use this fan if it has been damaged or is not functioning properly.
Remote controls for other appliances or electronic equipment can sometimes interfere with the
operation of this fan. If this occurs, move the fan to another location.
TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK OR PERSONAL INJURY,
ALWAYS FOLLOW THESE IMPORTANT SAFETY INSTRUCTIONS AND WARNINGS:
WARNINGS
READ ALL INSTRUCTIONS BEFORE USING THIS FAN.
NEW 1/24 7DST100
MAINTENANCE
Filter Replenishments
TROUBLE SHOOTING TIPS
If your Fan fails to operate, see below for a list of probable causes and solutions:
Try powering the fan o and unplugging it from the wall outlet. Allow the fan to sit for 10-15
minutes and try plugging it in again.
When plugging the fan in, be sure it is plugged directly into a working outlet.
Remote not working? Be sure you are using brand new batteries, and they are
installed correctly.
STORAGE: Store the fan with these instructions, in the original carton in a cool, dry place.
LUBRICATION: Motor is permanently lubricated. No maintenance is required.
DISPOSITION: Corrugated packaging materials are recyclable. For environmentally responsible
disposal of this product, contact your local waste service provider or visit
www.1800recycling.com.
Scan QR code to order replacement lters.
Please reference and follow lter installation guide on
page 6 for dissassembly and ressassembly instructions. Air Intake Grille
Filter Frame
Cleaning the fan:
1. Make sure the fan is unplugged.
2. Never place the fan in or near water.
3. Remove the air intake grille.
4. Clean the Air intake grille using micro ber cloth,
duster, or vacuum.
5. To help remove lint and dirt from inside the fan,
use a vacuum equipped with a brush attachment.
6. Clean lter frame with micro ber cloth.
7. Never use alcohol or solvents such as gasoline,
benzene, paint thinner, or other harsh cleaners.
NEW 1/24 6DST100
Easy Filter Installation Guide
NOTE: The face velocity of the fan will be reduced when lter medium is added.
Filter Placement / Replacement Instructions
Pre-installation note: it is recommended that the fan is laid down on a at surface while placing or
replacing your fan lter.
Installing new lter
Start Timer—Press and hold the MODE and FAN SPEED button together for 5 seconds. The
unit will ash F1 three times to indicate that the lter has been installed.
Reset Timer—The unit will start ashing CF to change the lter. After you replace the lter,
press and hold MODE and FAN SPEED together for 5 seconds. This will reset the timer.
If you choose not to use Lasko Filtration Technology, you can press and hold the MODE and
FAN SPEED buttons for 10 seconds. This will cancel the Filter Timer.
Saf rew
Tab
Tab
Filter Tab
Filter Tab
Remove the safety
screw from the air
intake grill using
a phillips-head
screwdriver.
Press the top and
bottom tabs then pull
up to detach the air
intake grill from the
fan body.
1 2
3 4
Push the lter
frame tabs
located on the
left side of the
air intake grill
to remove.
5
Tab
Tab
fe
e
ty
S
c
Filter Frame Air Intake Grille
Safety Screw
Place the lter inside of the
air intake grille.
Install the Filter Frame to the
air intake grille by aligning
the arrows on the top of each
part and snapping the lter
tabs into the air intake grille.
Reattach the air intake grille
to the rear of the body of
the fan. Align the tabs as
shown above.
Reinstall the safety screw
on the back.
NEW 1/24 3DST100
Keep fan remote control unit away from chairs and your bed where it may be sat or laid upon
and inadvertently turn on the fan.
THIS FAN DOES NOT MEET THE REQUIREMENTS OF NEC ARTICLE 547-7 (2008). This fan
is not suitable for use in agricultural facilities including areas where livestock, poultry or other
animals are con ned. Please refer to national electric code (NEC) Article 547-7 (2008), or
applicable state or local codes or standards relating to electrical requirements
for agricultural buildings.
THIS FAN DOES NOT MEET THE REQUIREMENTS OF NEC ARTICLE 500 (2008). This fan is
not suitable for use in hazardous locations. Please refer to national electric code (NEC) article
500 or applicable state or local codes or standards relating to electrical requirements for
hazardous locations.
Remove and immediately recycle or dispose of used batteries according to local regulations and
keep away from children. Do NOT dispose of batteries in household trash or incinerate.
Even used batteries may cause severe injury or death.
Call a local poison control center for treatment information.
Uses 1 - 3V CR2025 battery.
Non-rechargeable batteries are not to be recharged.
Do not force discharge, recharge, disassemble, heat above (manufacturers speci ed
temperature rating) or incinerate. Doing so may result in injury due to venting, leakage or
explosion resulting in chemical burns.
Ensure the batteries are installed correctly according to polarity (+ and -).
Do not mix old and new batteries, different brands or types of batteries, such as alkaline,
carbon-zinc, or rechargeable batteries.
Remove and immediately recycle or dispose of batteries from equipment not used for an
extended period of time according to local regulations.
Always completely secure the battery compartment. If the battery compartment does not close
securely, stop using the product, remove the batteries, and keep them away from children.
SAVE THESE INSTRUCTIONS
Battery Replacement (remote control)
If the battery in the remote-control needs replacing,
replace with CR2025 lithium battery.
To remove battery, use a coin to unlock the remote
control battery door. Turn clockwise to unlock. To
reinstall the cover, align the dot with the unlock icon
on the remote. Turn counterclockwise to lock.
Locked Position
Unlocked
Position


Product specificaties

Merk: Lasko
Categorie: Ventilator
Model: Summit DST100

Heb je hulp nodig?

Als je hulp nodig hebt met Lasko Summit DST100 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Ventilator Lasko

Handleiding Ventilator

Nieuwste handleidingen voor Ventilator