Lancom 1790EF Handleiding

Lancom Router 1790EF

Lees hieronder de 📖 handleiding in het Nederlandse voor Lancom 1790EF (2 pagina's) in de categorie Router. Deze handleiding was nuttig voor 37 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

Hardware

Power supply 12 V DC, external power adapter (110 or 230 V) with bayonet connector to secure against

disconnection

Power consumption Max. ca. 11 W

Environment Temperature range 0 – 40 °C; humidity 0 – 95 %; non-condensing

Housing Robust synthetic housing, rear connectors, ready for wall mounting, Kensington lock; mea-

sures 210 x 45 x 140 mm (W x H x D)

Number of fans None; fanless design, no rotating parts, high MTBF

Interfaces

WAN 10 / 100 / 1000 Mbps Gigabit Ethernet

ETH 4 individual 10 / 100 / 1000-Mbps Fast Ethernet ports; operate as switch ex-factory.

Up to 3 ports can be switched as additional WAN ports.

USB USB 2.0 Hi-Speed host port for connecting USB printers (USB print server), serial devices

(COM-port servers), USB data media (FAT file system), or supported UMTS USB modems

SFP Socket for small form-factor pluggable Gigabit-Ethernet transceiver (mini-GBIC).

Compatible with optional LANCOM SFP modules for optical connections over short distances

(SX) or longer distances (LX). Set as a LAN port ex-factory, can be configured as a WAN port

Serial Interface Serial configuration interface / COM port (8-pin Mini-DIN): 9,600 - 115,000 baud, suitable for

optional connection of analog/GPRS modems. Supports internal COM-port server and provides

transparent asynchronous serial data transmission via TCP

WAN protocols

Ethernet PPPoE, Multi-PPPoE, ML-PPP, PPTP (PAC or PNS) and IPoE (with or without DHCP), RIP-1,

RIP-2, VLAN, IP

Declaration of Conformity

Hereby, LANCOM Systems GmbH | Adenauerstrasse 20/B2 | D-52146 Wuerselen, declares that this device is in

compliance with Directives 2014/30/EU, 2014/35/EU, 2011/65/EU, and Regulation (EC) No. 1907/2006. The full text of

the EU Declaration of Conformity is available at the following Internet address: www.lancom-systems.com/doc

Package content

Documentation Hardware Quick Reference Guide (DE/EN); Installation Guide (DE/EN)

Cable 2 Ethernet cables, 3m (LAN: kiwi-colored connector; WAN: green connector)

Power adapter External power supply adapter (230 V) 12 V / 2 A DC/S; barrel / bayonet (EU),

LANCOM item no. 111303 (not for WW devices)

This product contains separate open-source software components which are subject to their own licenses, in particular

the General Public License (GPL). The license information for the device firmware (LCOS) is available on the device‘s

WEBconfig interface under “Extras > License information“. If the respective license demands, the source files for the

corresponding software components will be made available on a download server upon request.

a Power

Off Device switched off

Green, permanently* Device operational,

resp. device paired / claimed and LANCOM

Management Cloud (LMC) accessible

Red/green, blinking Configuration password not set. Without a

configuration password, the configuration

data in the device is unprotected.

Red, blinking Hardware error

Red, blinking slowly Time or charge limit reached/error message

occurred

1x green inverse

blinking*

Connection to the LMC active, pairing OK,

device not claimed

2x green inverse

blinking*

Pairing error, resp. LMC activation code

not available

3x green inverse

blinking*

LMC not accessible, resp. communication

error

b Online

Off WAN connection inactive

Green, blinking WAN connection is established

(e.g. PPP negotiation)

Green, permanently WAN connection active

Red, permanently WAN connection error

c SFP

Off SFP deactivated in the configuration

or SFP module present, no connection to

network device

Red, permanently SFP enabled in the configuration but no

SFP module present

Green, permanently SFP module present, connection to

network exists, no data transmission

Green, blinking Data transmission

Red, blinking SFP module present, hardware error

f VPN

Off No VPN connection active

Green, permanently VPN connection active

Green, blinking Establishing VPN connection

e ETH

Off No link

Green, permanently Network connection ready (link)

Green, flickering Data transmission

d WAN

Off Interface deactivated

Orange, blinking Synchronization with the modem

Orange, permanently Synchronization with the modem

successful

Green, permanently WAN connection established

Green, flickering WAN data transmission

Red/orange, blinking Hardware error, ext. modem

T E C H N I C A L D E T A I L S

M O U N T I N G A N D C O N N E C T I N G T H E D E V I C E

LANCOM 1790EF

WAN

SFP

ETH 2

Power

ETH 1

Online

ETH 4

ETH 3

VPN

*) The additional power LED statuses are displayed in 5-seconds

rotation if the device is configured to be managed by the LANCOM

Management Cloud.

a c d e fb

LANCOM 1790EF

Quick Reference Guide

C ud eadylo -r

a c d e f gb

aSFP interface

Insert a suitable SFP module (e.g. 1000Base-SX or 1000Base-LX)

into the SFP port. Choose a cable compatible with the SFP module

and connect it as described in the module’s documentation. SFP

modulel and cable are not included.

bWAN interface

Use the cable with the green connectors to connect the WAN

interface to your WAN modem..

cEthernet interfaces

Use the cable with the kiwi-colored connectors to connect one of

the interfaces ETH 1 to ETH 4 to your PC or a LAN switch.

dConfiguration interface

Use a serial configuration cable to connect the serial interface

(COM) to the serial interface of the device you want to use for

configuring / monitoring (separately available).

eUSB interface

Connect a USB data medium or a USB printer to the USB

interface. (USB cable not supplied)

fReset button

Pressed up to 5 seconds: device restart

Pressed until first flashing up of all LEDs:

configuration reset and device restart

gPower

After connecting the cable to the device, turn the bayonet

connector 90° clockwise until it clicks into place.

Use only the supplied power adapter.

Please observe the following when setting up the device

A Do not rest any objects on top of the device

A For devices to be operated on the desktop, please attach the

adhesive rubber footpads

AIn case of wall mounting, use the drilling template as supplied

AKeep the ventilation slots on the side of the device clear

of obstruction

ARack installation with the optional LANCOM Rack Mount

(separately available)

LANCOM 1681V

Power

VDSL

Onl ine

ETH 1

VPN

TH 3

ETH 4

Before initial startup, please make sure to take notice of the information regarding the intended use in the enclosed installation guide!

Operate the device only with a professionally installed power supply at a nearby power socket that is freely accessible at all times.

LANCOM, LANCOM Systems, LCOS, LANcommunity and Hyper Integration are registered trademarks. All other names or descriptions used may be trademarks or registered trademarks of their owners. This document

contains statements relating to future products and their attributes. LANCOM Systems reserves the right to change these without notice. No liability for technical errors and / or omissions. 111809/01/22

Product specificaties

Merk:	Lancom
Categorie:	Router
Model:	1790EF
Kleur van het product:	Black, Grey
Breedte:	210 mm
Diepte:	140 mm
Hoogte:	45 mm
LED-indicatoren:	Ja
Aantal Ethernet LAN (RJ-45)-poorten:	4
Aantal USB-aansluitingen:	1
USB-versie:	2.0
Ethernet LAN, data-overdrachtsnelheden:	10,100,1000 Mbit/s
Bekabelingstechnologie:	10/100/1000Base-T(X)
Netwerkstandaard:	IEEE 802.1Q, IEEE 802.3az
Ondersteunde beveiligingsalgoritmen:	3DES, AES
Web-gebaseerd management:	Ja
MAC adres filtering:	Ja
Ethernet WAN:	Ja
Firewall:	Ja
DHCP server:	Ja
Ethernet interface type:	Gigabit Ethernet
Quality of Service (QoS):	Ja
VLAN=ondersteuning:	Ja
DHCP client:	Ja
Multicast-ondersteuning:	Ja
DSL WAN:	Ja
Stroomverbruik (typisch):	11 W
Bedrijfstemperatuur (T-T):	0 - 40 °C
Relatieve vochtigheid in bedrijf (V-V):	0 - 95 procent
Code geharmoniseerd systeem (HS):	85176990
VDSL:	Ja
ADSL:	Ja
Port forwarding:	Ja
ADSL2+:	Ja
ADSL2:	Ja