La Crosse Technology 617-1392W Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor La Crosse Technology 617-1392W (6 pagina's) in de categorie Wekkerradio. Deze handleiding was nuttig voor 36 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6
617 1392B/617 1392W- - www.lacrossetechnology.com/support Page | 1
Model: 617 1392B/617 1392W- -
Instruction Manual
DC: 051616
ATOMIC DIGITAL/ANALOG ALARM CLOCK
BUTTONS
Indoor
Temperature
+ Alarm 2
Calendar,
Weekday
+ Alarm 1
Radio-
controlled
Time
Second
Hand
Snooze Button
617 1392B/617 1392W- - www.lacrossetechnology.com/support Page | 2
Get Started
1. AAA Alkaline Insert 2 new batteries ( included) into the not
alarm clock. Observe the correct polarity.
Restart: If there is no indoor temperature data after 60
seconds, remove batteries from the , press any alarm clock
button 20 times. After 15 minutes, start again.
Set Time, Date, etc.
1. Hold the TIME SET button for 5 seconds, to enter time set
mode.
2. Press the â–² or â–¼buttons to adjust values.
3. Press the TIME SET button to confirm adjustments and
move to the next item.
Setting Order:
1. RCC time signal (On/Off)
2. 12/24 hour time format
Note: -12 hour time = Month/Date display
24-hour time = Day/Month display
3. Time Zone time zones- 4
4. Hour
5. Minutes
6. Year
7. Month
8. Date (day of the week sets automatically)
9. DST (Daylight Saving Time On/Off)
10. Fahrenheit/Celsius (°F or °C)
Press the TIME SET button to exit, or wait 15 seconds without
pressing buttons to return to the normal time display.
Date Display
The date may be displayed as the Month/Date format or as the
Date/Month format.
P
Pacific
M
Mountain
C
Central
E
Eastern
617 1392B/617 1392W- - www.lacrossetechnology.com/support Page | 3
1. Press the hour time and the â–² -button to select 12
Month/Date format.
2. Press the hour time and the â–² -button again to select 24
Date/Month format.
Note: From the time display, press the TIME SET button to
select Month/Date or Year to display in the lower left-hand
corner.
Set Alarm 1 or Alarm 2
The clock has two separate time alarms. Setting the alarms and
activating the alarms are separate actions.
1. Hold the AL-SET button for 2 seconds to enter alarm time
set mode for Alarm 1.
2. Press the â–² or â–¼buttons to adjust the alarm time. The
minutes and hours are set together.
3. Hold the â–² or â–¼buttons to change quickly.
4. Press the AL-SET button to confirm and A move to larm 2.
5. Press the â–² or â–¼buttons to adjust the alarm time. The
minutes and hours are set together.
6. Hold the â–² or â–¼buttons to change quickly.
7. Press the confirmAL-SET button to and exit.
Activate/Deactivate Alarm 1 and Alarm 2
• To activate or deactivate Alarm 1 or Alarm 2, use the slide
bars on the back of the clock.
• There is a slide bar (ON/OFF) for AL 1 . and for AL 2
•
When active, Alarm 1 will show in the Date display with
alarm icon.
• When active, Alarm 2 will show in the Temperature display
with alarm icon.
Snooze
• When alarm sounds, press the SN ZOO E/LIGHT
button 5 to silence the alarm for minutes.
• The alarm icon will flash.


Product specificaties

Merk: La Crosse Technology
Categorie: Wekkerradio
Model: 617-1392W

Heb je hulp nodig?

Als je hulp nodig hebt met La Crosse Technology 617-1392W stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Wekkerradio La Crosse Technology

Handleiding Wekkerradio

Nieuwste handleidingen voor Wekkerradio