Kodak DC280 Handleiding
Kodak
Fotocamera
DC280
Lees hieronder de 📖 handleiding in het Nederlandse voor Kodak DC280 (104 pagina's) in de categorie Fotocamera. Deze handleiding was nuttig voor 32 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/104
KODAK DC240/DC280 Zoom Digital Camera
User’s Guide
Visit Kodak on the World Wide Web at www.kodak.com
©Eastman Kodak Company, 1999
Kodak, and Photolife, are trademarks of
Eastman Kodak Company.
i
Table of Contents
1 Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Preparing to Take Pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Loading Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Turning the Camera On and Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Checking Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Using the Battery Charger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Using an AC Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Inserting a Camera Memory Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Removing a Camera Memory Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Setting the Clock on Your Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Adjusting the LCD Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2 Taking Pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Previewing a Picture Before it is Taken . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Pressing the Shutter Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Zooming in on Your Subject . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Zooming in Even Closer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Viewing the Picture Just Taken . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Setting a Quickview for Each Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Setting the Flash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Photographing Distant Subjects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Photographing Close-Ups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Putting Yourself in the Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Adding the Date to Your Pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Deleting the Picture Just Taken . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
ii
3 Customizing Your Pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Adjusting the Camera Exposure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Adding a Border to Your Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Capturing in Black-and-White, Sepia Tone, or Document . . . . . . . . . . . . . . .24
Adjusting the Picture Quality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Adjusting the Picture Resolution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Selecting a White Balance for Indoor Pictures . . . . . . . . . . . . . . . . . . . . . . .27
Choosing a Metering System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Adjusting the ISO Setting (DC280 only) . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Sharpening and Softening a Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Locking in an Exposure Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
4 Reviewing Your Pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Viewing Your Pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Magnifying Your Pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Selecting Pictures for Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Cancelling Pictures for Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
Protecting Your Pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Deleting One or All of Your Pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Running a Slide Show on Your Television . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Viewing Information About a Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
5 Personalizing Your Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Setting a Response Beep . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Saving Camera Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Viewing Camera Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Selecting a Language for the Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47
Formatting Your Camera Memory Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Adjusting the Video Out Signal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Adjusting the Camera Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Setting a Border Default . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Setting a Flash Default . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Setting a White Balance Default . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
iii
Setting an Exposure Compensation Default . . . . . . . . . . . . . . . . . . . . . 53
Setting an Effect Default . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Setting an Auto ISO Default (DC280 only) . . . . . . . . . . . . . . . . . . . . . . 55
6 Installing Your Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Windows-Based System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Macintosh System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Kodak Software for Windows-Based Computers . . . . . . . . . . . . . . . . . . . . . 58
Software Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Kodak Software for Macintosh Computers . . . . . . . . . . . . . . . . . . . . . . . . . 59
Software Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Installing the Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
7 Connecting Your Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Using a Serial Cable Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Connecting to a Windows-Based Computer . . . . . . . . . . . . . . . . . . . . . . 62
Connecting to a Macintosh Computer . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Using a USB Cable Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Starting the Kodak Software for Windows-Based Computers . . . . . . . . . 65
Opening Mounter Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Opening Digital Access Software (TWAIN Acquire) . . . . . . . . . . . . . . . 65
Opening Camera Controls Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Opening Border Transfer Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Starting the Kodak Software for Macintosh Computers . . . . . . . . . . . . .66
Opening Picture Transfer Application . . . . . . . . . . . . . . . . . . . . . . . . . . .66
Opening Digital Access Software (Plug-In Acquire) . . . . . . . . . . . . . . .66
Opening Border Transfer Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Navigating to Your Pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
iv
8 Tips and Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Connecting with Your Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Communicating with the Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Adjusting Your Monitor for Better Viewing . . . . . . . . . . . . . . . . . . . . . . . . . 69
Getting Better Results from Your Printer . . . . . . . . . . . . . . . . . . . . . . . . . 70
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
9 Where to Get Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Software Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79
Online Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79
Faxed Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79
Customer Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
10 Warranty and Regulatory Information . . . . . . . . . . . . . . . . . . . 83
Warranty Time Period . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Warranty Repair Coverage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Limitations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Application Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
How to Obtain Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Regulatory Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
FCC Compliance and Advisory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Canadian DOC Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
11 Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Original Camera Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
DC240 Camera Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
DC280 Camera Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
General Maintenance and Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Using Your Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
1
1
1 Getting
Started
Congratulations on your purchase of the new 1.3 megapixel KODAK
DC240 Zoom Digital Camera (DC240) or 2.0 megapixel KODAK DC280
Zoom Digital Camera (DC280)—the cameras that take pictures digitally,
without the use of film. With your new camera, picture taking and print
making have never been easier or faster. The possibilties are endless.
Here is just a few examples of what you can do with your camera:
qTake digital pictures in unbelievable detail, color, and sharpness.
qTransfer your pictures to a computer for instant editing,
enhancement, and placement into your document.
qE-mail your pictures in minutes to friends, family, and business
associates anywhere in the world.
qPrint high-quality pictures at home using KODAK Inkjet Photo
Paper, or take your KODAK Picture Card to a KODAK Picture
Maker System and create photo-quality enlargements with a touch
of a button.
qDisplay your pictures to a large audience on a television or video
monitor.
qCustomize your pictures with a company logo or graphic using the
KODAK DC240/DC280 Border Transfer Application.
3
1
Checking Batteries
So you are never caught with dead batteries, your camera indicates the
power level of the batteries, in the form of a battery status symbol, which
appears in the Status Display when you turn on the camera.
For information on guidelines for battery usage, see page 91.
1Set the Mode dial to Capture, Review, or
Camera Settings.
The battery status symbol is not visible if
you set the camera to Connect.
2Slide the POWER switch to the right to
turn on the camera.
3Check the battery status symbol that
appears in the Status Display.
qFull (No Icon)—indicates that batteries
are charged and ready to use.
qLow—indicates batteries are not fully
charged and will soon need to be
replaced or recharged.
qExhausted (blinking)—indicates
batteries are too weak to power the
camera and need to be replaced.
T
W
4
Using the Battery Charger
To ensure that you have a constant supply of freshly charged batteries, a
battery charger and four AA Ni-MH rechargeable batteries are provided
with some DC240/DC280 cameras. These batteries need to be charged
before using and take up to eight hours to fully charge. So you are always
prepared to take pictures, keep one set of rechargeable batteries in the
camera, and an extra set charged, ready for use. You can purchase
additional KODAK Ni-MH Rechargeable Batteries as an accessory. For
details about available accessories, ask your dealer of Kodak products, or
visit our Website at http://www.kodak.com/go/accessories.
1Verify that you are loading Ni-MH or
Ni-Cd rechargeable batteries. If they are
any other type, do not load them into
the charger.
This charger is for charging Ni-MH or
Ni-Cd batteries only, with a maximum of 4
cells, and a maximum charge of 1450mAH.
Do not charge nonrechargeable batteries.
2Align the positive and negative ends of the
batteries with the positive and negative
contact points in the charger.
3Insert the batteries into the charger until
the batteries snap in place.
4Plug the charger into a power outlet.
Depending on where you live, some
battery chargers are supplied with power
plugs that are not attached to the charger. If
you have that type of charger, use the plug
that matches your power outlet.
5Verify that the charge indicator lights on
the charger turn on. If the lights do not turn
on, verify that the batteries are inserted
correctly.
Batteries are fully charged when the charge
indicator lights on the charger turn off, or
after 8 hours of charging.
6Unplug the charger and remove the
batteries when charging is complete.
5
1
Using an AC Adapter
If you are taking pictures indoors or when the camera is connected to a
computer, you may want to use a Kodak-specified AC adapter to help
conserve battery power. It is important to use only a Kodak-specified AC
adapter with your DC240/DCD280 camera. If you do not have a Kodak-
specified AC adapter, you can purchase one as an accessory. For details
about available accessories, ask your dealer of Kodak products, or visit
our Website at http://www.kodak.com/go/accessories.
1Slide the POWER switch to the right to
turn off the camera.
2Open the AC adapter port door on the side
of the camera.
3Plug the appropriate end of the AC
adapter into the port on the camera.
4Plug the AC adapter into the power outlet.
Depending on where you live, some AC
adapters are supplied with power plugs
that are not attached. If you have that type
of adapter, use the type of plug that
matches your power outlet.
5Slide the POWER switch to the right to
turn on the camera.
The camera is now powered by the
AC adapter.
DC IN
VIDEO
OUT
OPEN CARD
_+
6
Inserting a Camera Memory Card
Your camera comes with a KODAK Picture Card (camera memory card),
that is used to store pictures you take with the camera. The camera
memory card, also referred to as a CompactFlash card, is removable and
reusable for easy storage and transfer of your pictures. Before you can
take pictures, you need to insert a camera memory card into the camera.
You can purchase additional KODAK Picture Cards as an accessory. For
details about available accessories, ask your dealer of Kodak products, or
visit our Website at http://www.kodak.com/go/accessories.
Removing a Camera Memory Card
WARNING:Do not insert or eject a camera memory card
when the camera memory card light, located above the card
door, is blinking. This may damage your pictures or camera.
Use only certified camera memory cards that carry the
CompactFlash logo.
1Open the camera memory card door on
the camera.
2Hold the camera memory card so the
connection end is pointed at the camera,
and the card label with the MB size is
facing toward the back of the camera.
The camera memory card can only be
inserted one way into the camera. Forcing
the card may damage your camera.
3Push the camera memory card all of the
way into the card slot and close the door.
1Open the camera memory card door
on the camera.
2Slide the EJECT button in the
direction of the arrow.
The camera memory card partially
slides out of the slot.
3Remove the camera memory card
from the slot and close the door.
AA BATT .
EJECT
7
1
Setting the Clock on Your Camera
Your camera has a built-in clock that maintains the date and time in a
24-hour format. The camera clock needs to be set if you plan to use the
Date Stamp feature, which imprints the date on your picture. For
information on using the Date Stamp feature, see page 19.
1Set the Mode dial to Camera Setup.
2Slide the POWER switch to the right to
turn on the camera.
The main Camera Setup screen appears.
3Press a button until the
icon is highlighted.
4Press the DO-IT button.
The Date/Time screen appears.
5Press a buttons to adjust
the date and time fields.
6Press the DO-IT button.
The camera accepts the setting and returns to
the main Camera Setup screen.
If you remove the batteries from the
camera for an extended period of time,
or the batteries become exhausted, you
may need to reset the clock.
/
/ /
10
Previewing a Picture Before it is Taken
If you want to see what a picture looks like before you take it, you can
preview the image on the LCD on the back of your camera. The live
image that appears is very helpful for framing your subject, especially
when using the Close-Up, Digital Zoom, and Border features. If you want
to take pictures in black and white or sepia tone, or to highlight text,
Preview can help you make that decision. With Preview, batteries are
easily drained, so use a Kodak-specified AC adapter whenever possible.
1Set the Mode dial to Capture.
2Slide the POWER switch to the right to
turn on the camera.
3Press the DO-IT button.
The LCD displays a live image with the icons
of activated camera features.
The image in the LCD appears in color
unless you have turned on an effect, such
as black and white or sepia tone, in
which case the effect is applied to the
displayed image. See page 24 for details.
qExposure Compensation—icon
appears in the LCD and Status
Display if you adjusted the camera
exposure. See page 22 for details.
qExposure Lock—icon appears in the
LCD if you locked the exposure. See
page 31 for details.
qBorders—selected border appears
over the picture on the LCD. See page
23 for details.
qDate Stamp—icon appears in the
LCD if you turned on the date stamp.
See page 19 for details.
4To turn off Preview, press the
DO-IT button.
11
2
Pressing the Shutter Button
Taking pictures is a snap with your camera. The SHUTTER button on
your camera locks in the auto focus and takes the picture.
1Set the Mode dial to Capture.
2Slide the POWER switch to the right to
turn on the camera.
3Center the subject using the guide
marks in the viewfinder, or turn on
Preview (page 10) and use the LCD to
frame your subject.
4Press the SHUTTER button half-way
down to lock in the camera auto focus.
The camera beeps twice and the green ready
light comes on when the camera is set to
take a picture.
If the green ready light next to the
viewfinder blinks, then the auto focus
is not focused on the subject. Release
the SHUTTER button and recompose
your picture. Press the SHUTTER
button half-way down again to relock
the auto focus on the subject.
If the red flash indicator light next to
the viewfinder blinks, then the flash is
not fully charged. Wait for the ash to
charge before taking the picture.
5Press the SHUTTER button completely
down to take the picture.
The camera beeps again to confirm that a
picture was taken. The Pictures Remaining
icon on the Status Display changes and the
camera memory card light blinks as the
picture is stored on the card.
W
T
DC IN
-
+
VIDEO
OUT
CARDOPEN
12
Zooming in on Your Subject
With a touch of a button you can zoom from Wide Angle, which gives
you more of the surrounding area in pictures, to TelePhoto, which brings
the subject in closer.
Zooming in Even Closer
If you need to get closer to your subject, use the Digital Zoom feature.
With digital zoom, the center of your picture is magnified so your
pictures appear even closer.
1Set the Mode dial to Capture.
2Slide the POWER switch to the right
to turn on the camera.
3Press the ZOOM control.
When you look through the
viewfinder, the subject appears closer
as you press the T ZOOM button,
and farther away as you press the W
ZOOM button.
1Press the DO-IT button to turn on
Preview if it is not already activated.
The LCD turns on with a live image.
2Frame your subject using the LCD.
3Press the T ZOOM button until it is
at the farthest position.
4Release and press the T ZOOM
button again to activate
digital zoom.
The camera beeps as the LCD displays
the digital zoom icon.
TW
13
2
Viewing the Picture Just Taken
You can view a picture seconds after it is taken with a touch of a button. It
is a handy way to check if your subject was positioned correctly.
Setting a Quickview for Each Picture
You can set the camera so a quick view of the picture just taken appears in
the LCD automatically using the Quickview feature.
1Set the Mode dial to Capture.
2Slide the POWER switch to the right to
turn on the camera.
3Press the SHUTTER button to take a
picture.
4Press the button.
The picture just taken appears in the LCD
for several seconds with the delete icon above
the button.
If you want to view the picture again,
press the button.
5To delete the picture on the LCD, press
the button.
The LCD displays the Delete Picture screen.
6Press a button until YES
is highlighted.
7Press the DO-IT button.
The picture is permanently deleted from the
camera memory card.
1Set the Mode dial to Capture.
2Slide the POWER switch to the right to
turn on the camera.
3Press the MENU button.
The main Menu screen appears.
/
14
4Press a button until the
is highlighted.
5Press the DO-IT button.
The LCD displays the Quickview screen. The
current setting is checked (ä).
6Press a button until ON
is highlighted.
7Press the DO-IT button.
The main Menu screen reappears.
The image appears for several seconds
on the LCD in color unless you have
turned on an effect, such as black and
white or sepia tone, in which case the
effect is applied to the displayed image.
See page 24 for details.
qExposure Compensation—icon
appears in the LCD and the Status
Display if you adjusted the camera
exposure. See page 22 for details.
qExposure Lock—icon appears in the
LCD if you locked the exposure. See
page 31 for details.
qBorders—selected border appears
over the picture. See page 23 for
details.
qDate Stamp—icon appears in the
LCD if you turned on the date stamp.
See page 19 for details.
qDelete—icon appears above the
button. Press the button to delete the
picture. See page 20 for details.
8To turn off Quickview, press a
button on the Quickview screen
until OFF is highlighted, then press the
DO-IT button.
/
/
/
15
2
Setting the Flash
When taking pictures at night, indoors, or outdoors in heavy shadows,
your pictures need flash. For everyday picture-taking, use the Auto
setting. However, there are times when changing the flash option can
improve your pictures. For instance, if you are taking pictures of people
indoors or at night, you can help reduce the likelihood of red eye by using
the Red-Eye setting. When your subject is outdoors under heavy
shadows, you can eliminate those shadows by using the Fill flash. In
situations where the use of flash is prohibited, as in museums, you can
turn off the flash.
1Set the Mode dial to Capture.
2Slide the POWER switch to the right to
turn on the camera.
3Press the FLASH button to scroll though
the flash options.
The Flash setting icon changes in the
Status Display.
qAuto (No Icon)—fires the flash
automatically when needed. The
camera determines when there is not
enough light.
qOff—turns off the flash.
qFill—fires the flash every time you
take a picture.
qRed-Eye—fires the flash once before
the picture is taken, then fires again
when the picture is taken.
4To return to the Auto setting, press the
FLASH button, or turn off the camera.
T
W
16
Photographing Distant Subjects
If you want to create postcard-like pictures of scenic views, such as a
sunset or mountain range, use the Infinity Focus feature. When Infinity
Focus is selected, the camera automatically turns off the flash and auto
focus so you get sharp, clear pictures. If you have the DC280 camera, you
can override the flash setting for situations where flash is needed. For
information on setting the flash, see page 15.
1Set the Mode dial to Capture.
2Slide the POWER switch to the right to
turn on the camera.
3Press the INFINITY FOCUS/CLOSE-UP
button.
The Infinity Focus icon appears in the
Status Display.
4Frame your subject in the viewfinder and
press the SHUTTER button to take
the picture.
5To turn off Infinity Focus, press the
INFINITY FOCUS/CLOSE-UP button
two times, or turn off the camera.
T
W
17
2
Photographing Close-Ups
If you want to take pictures of objects up close, such as flowers or
artwork, use the Close-Up feature. When selected, the camera
automatically sets the focus distance to 0.8 to 1.6 ft (0.25 to 0.5 m) and sets
the flash to ensure detail and clarity. Since the viewfinder on the camera
may not accurately frame your picture in Close-Up, the Preview option is
automatically activated. For information on Preview, see page 10.
1Set the Mode dial to Capture.
2Slide the POWER switch to the right to
turn on the camera.
3Press the INFINITY FOCUS/CLOSE-UP
button twice.
The Close-Up icon appears in the Status
Display and the LCD Preview feature shows
a live image.
When you use the Close-Up feature, the
zoom capabilities on the camera
are disabled.
4Frame your subject using the LCD and
press the SHUTTER button.
5To turn off Close-Up, press the INFINITY
FOCUS/CLOSE-UP button once, or turn
off the camera.
T
W
18
Putting Yourself in the Picture
There might be times when you want everyone, including yourself, to be
in the picture. For these occasions, use the Self-Timer feature to create a
10-second delay between the time you press the SHUTTER button and
the time the picture is taken.
1Set the Mode dial to Capture.
2Slide the POWER switch to the right to
turn on the camera.
3Press the SELF-TIMER button.
The Self-timer icon appears in the
Status Display.
If you want to the cancel self-timer
before the picture is taken, press the
SELF-TIMER button again or turn off
the camera.
4Place the camera on a flat, steady surface
or tripod.
5Frame your subject in the viewfinder and
press the SHUTTER button.
The red Self-Timer light, located on the front
of the camera, turns on and stays lit for 8
seconds, then flashes for 2 additional seconds
just before the picture is taken.
The Self-Timer turns off when the picture
is taken.
T
W
19
2
Adding the Date to Your Pictures
You may want to keep track of when a picture was taken, perhaps to
record a child’s first picture or for an insurance claim. Whatever the
reason, your camera has the ability to record the date and time directly on
your picture using the Date Stamp feature. In order for the feature to
imprint the correct date and time, you need to set the camera clock. See
page 7 for details. Once a picture is taken with the date stamp, the date
stamp cannot be removed.
1Set the Mode dial to Capture.
2Slide the POWER switch to the right to
turn on the camera.
3Press the MENU button.
The LCD displays the main Menu screen.
4Press a button until the
icon is highlighted.
5Press the DO-IT button.
The LCD displays the Date Stamp screen.
The current setting is checked (ä).
6Press a button until the Date
Stamp option you want is highlighted.
7Press the DO-IT button.
The main Menu screen reappears.
The next time you take a picture the date
or date and time is recorded in the lower
right-hand corner of the picture. The
Date Stamp icon appears on the LCD
screen if Quickview (page 13) or Preview
(page 10) is turned on.
8To turn off Date Stamp, press
a button until OFF is highlighted,
then press the DO-IT button.
/
/
/
20
Deleting the Picture Just Taken
If you decide that you do not like a picture, you can delete it quickly from
the camera memory card immediately after it is taken. For the Quick
Delete feature to work, the picture must be displayed on the LCD, so
Quickview needs to be activated. Once you delete the picture, it is
permanently removed from the camera memory card.
1Set the Mode dial to Capture.
2Slide the POWER switch to the right to
turn on the camera.
3Turn on Quickview (page 13).
4Frame your subject in the viewfinder and
press the SHUTTER button.
The picture appears on the LCD with the
icon displayed above the button.
5Press the button.
The LCD displays the Delete Picture screen.
6Press a button until YES
is highlighted.
7Press the DO-IT button.
The picture is permanently deleted from the
camera memory card.
/
3
21
3 Customizing
Your Pictures
Chapters 1 and 2 explained the basics for taking great digital pictures. In
this chapter, you will learn about some of the custom features available
on your camera. Because your camera is so versatile, you have the ability
to set the camera for almost any picture taking situation you may
encounter. With the camera, you can:
qAdjust the exposure for pictures that are too light or too dark.
qFrame your pictures with interesting borders supplied on the
camera memory card and software CD.
qCapture pictures in color, black and white, sepia tone, or highlight
text in documents.
qAdjust the ISO sensitivity for low light photography without flash
(DC280 only).
qSelect specific picture quality and resolution settings to meet your
demanding picture-taking needs.
qSet white balancing options, so you get great color reproduction in
your pictures.
qAdjust the metering system to control how light affects
your pictures.
qSharpen and soften pictures so editing in software can be
done easier.
qLock the exposure for a consistent look in all your pictures.
22
Adjusting the Camera Exposure
If your pictures seem too dark or too light, you can adjust the amount of
light allowed into the camera so your pictures are properly exposed.
These adjustments in lighting are called Exposure Compensation.
1Set the Mode dial to Capture.
2 Slide the POWER switch to the right to
turn on the camera.
3Press the MENU button.
The LCD displays the main Menu screen.
4Press a button until the icon
is highlighted.
5Press the DO-IT button.
The LCD displays the Exposure Compensation
screen.
6Press a button to change the
exposure number.
qIf your pictures are too dark, increase
(+) the exposure number.
qIf your pictures are too light, decrease
(-) the exposure number.
You can adjust the exposure numbers from
+2.0 to -2.0 in 0.5 increments. An increase
of 1.0 doubles the amount of light allowed
into the camera. A decrease of 1.0 reduces
the amount of light allowed into the
camera by half.
7Press the DO-IT button.
The main Menu screen reappears and the
Exposure Compensation icon appears in the
Status Display.
8To cancel Exposure Compensation, press a
button until 0.0 is highlighted,
then press the DO-IT button, or turn off
the camera.
/
/
T
W
/
24
Capturing in Black-and-White, Sepia Tone, or Document
If you want to take black-and-white pictures, maybe for a brochure or
newspaper; in sepia tone to give your picture an antique look; or of
documents so text stands out, use the Effects setting. When activated, the
camera Preview is automatically turned on so you can see if the effect
selected works well with your subject. If you like the effect, go ahead and
take the picture. If you do not like the effect, select a different one before
taking the picture. Once the picture is taken with the effect, the effect
cannot be removed.
1Set the Mode dial to Capture.
2Slide the POWER switch to the right to
turn on the camera.
3Press the MENU button.
The LCD displays the main Menu screen.
4Press a button until the icon
is highlighted.
5Press the DO-IT button.
6Press a button until the Effect
option you want is highlighted.
qBlack & White—takes a black-and-
white picture.
qSepia Tone—takes a picture with a
reddish-brown cast.
qDocument—takes a picture with added
contrast so text stands out.
qNo Effect—takes a color picture.
7Press the DO-IT button.
The main Menu screen reappears.
8To cancel Effect, press a button
until No Effect is highlighted, then press
the DO-IT button, or turn off the camera.
/
/
/
25
3
Adjusting the Picture Quality
If you intend to make large prints, you can capture more detail in the
picture using the Best setting. However, with this setting more room is
used on the camera memory card. For everyday pictures, use the Better
setting, which gives you great pictures and more storage space on the
camera memory card. If you need to store a large number of pictures on
the camera memory card or are going to e-mail or use the pictures online,
use the Good setting.
1Set the Mode dial to Capture.
2Slide the POWER switch to the right to
turn on the camera.
3Press the MENU button.
The LCD displays the main Menu screen.
4Press a button until the
icon is highlighted.
5Press the DO-IT button.
The LCD displays the Quality screen. The
current setting is checked (
ä).
6Press a button until the Quality
option you want is highlighted.
qBest—use for printing 8x10 pictures.
qBetter—use for everyday pictures.
qGood—use for online or for e-mailing
pictures.
7Press the DO-IT button.
The main Menu screen reappears as the
Quality icon for the setting you selected
appears in the Status Display.
You can switch freely between these
three settings when taking pictures.
/
/
T
W
26
Adjusting the Picture Resolution
If you want to send pictures through e-mail or use them online, use the
Standard resolution setting. With this setting, only the information
needed for viewing on a computer or printing small prints is captured.
For pictures that are going to be printed, use the High resolution setting.
With this setting, more information is captured, but fewer pictures fit on
the camera memory card.
1Set the Mode dial to Capture.
2Slide the POWER switch to the right to
turn on the camera.
3Press the MENU button.
The LCD displays the main Menu screen.
4Press a button until the icon
is highlighted.
5Press the DO-IT button.
The LCD displays the Resolution screen. The
current setting is checked (
ä).
6Press a button until the
Resolution option you want
is highlighted.
qHigh—use this setting when you are
going to print your pictures. Picture
size is 1280 x 960 (DC240) or
1760 x 1168 (DC280) pixels.
qStandard—use this setting when you
are going to e-mail or use the pictures
online. Picture size is 640 x 480
(DC240) or 896 x 592 (DC280) pixels.
7Press the DO-IT button.
The main Menu screen reappears as the
Resolution icon appears in the
Status Display.
You can switch freely between these two
settings when taking pictures.
/
/
T
W
27
3
Selecting a White Balance for Indoor Pictures
If you are using your camera indoors where flash is prohibited, your
pictures may take on a green tint if captured under fluorescent tube
lighting, or a reddish-orange tint if captured under tungsten household
lighting. You can correct this problem using the White Balance feature on
the camera. Use the Auto setting for everyday pictures. Use the Daylight,
Fluorescent, or Tungsten setting for taking pictures under these lighting
conditions without flash.
1Set the Mode dial to Capture.
2Slide the POWER switch to the right to
turn on the camera.
3Press the MENU button.
The LCD displays the main Menu screen.
4Press a button until the icon
is highlighted.
5Press the DO-IT button.
The LCD displays the White Balance screen.
The current setting is checked (ä).
6Press a button until the White
Balance option you want is highlighted.
qAuto (No Icon)—automatically
adjusts the white balance.
qDaylight—balances for natural
daylight lighting.
qFluorescent—corrects for the green
cast of fluorescent lighting.
qTungsten—corrects for the orange
cast of tungsten light bulbs.
7Press the DO-IT button.
The main Menu screen reappears as the
White Balance icon you selected appears in
the Status Display.
Your camera automatically resets to Auto
when the camera is turned off.
/
/
T
W
28
Choosing a Metering System
You can control the way light aects your pictures using the metering
systems available on your camera. If you want a nice even exposure
throughout the picture, use the Multi-Pattern setting. This setting is great
for everyday pictures. If you want to emphasize the center of your
picture, such as a person’s face, while at the same time de-emphasizing
the background, use the Center-Weighted setting.
1Set the Mode dial to Capture.
2Slide the POWER switch to the right to
turn on the camera.
3Press the MENU button.
The LCD displays the main Menu screen.
4Press a button until the icon
is highlighted.
5Press the DO-IT button.
The LCD displays the Auto Exposure screen.
The current setting is checked (
ä).
6Press a button until the Auto
Exposure option you want is
highlighted.
qMulti-Pattern—evaluates the lighting
conditions of the entire picture.
qCenter-Weighted—evaluates the
lighting conditions of the subject
centered in the viewfinder and sets
the overall exposure setting for the
picture based on the center of
the subject.
7Press the DO-IT button.
The main Menu screen reappears.
You can switch freely between the two
settings when taking pictures.
/
/
29
3
Adjusting the ISO Setting (DC280 only)
If you are taking pictures in low light without flash, such as in a museum,
you can adjust the Auto ISO sensitivity on the camera to help prevent
blurred pictures caused by camera movement. With this feature the
shutter speed is automatically increased to make the camera more
responsive, while maintaining proper exposure for the picture.
1Set the Mode dial to Capture.
2Slide the POWER switch to the right
to turn on the camera.
3Press the MENU button.
The LCD displays the main Menu screen.
4Press a button until the
icon is highlighted.
The LCD displays the Auto ISO screen.
The current setting is (ä).
5Press the DO-IT button.
6Press a button until the option
you want is highlighted.
qOFF—camera selects the optimal
shutter speed for pictures. Ideal
for everyday picture-taking.
qON—camera increases the shutter
speed when flash is turned off.
Ideal for indoor pictures in less
than optimal lighting.
7Press the DO-IT button.
8To cancel Auto ISO, press
a button until OFF is
highlighted, then press the DO-IT
button, or turn off the camera.
/
/
/
30
Sharpening and Softening a Picture
If you are planning to edit your pictures using image editing software, the
Sharpness feature can make some editing processes easier. By selecting
the Sharp setting, the edges around the picture are enhanced, making it
easier to cut or crop the image. If you want to blend the image into a
background, use the Soft setting to de-emphasize the edges. For everyday
picture-taking, keep the Sharpness feature set to Standard. The Sharp or
Soft settings may increase or decrease the clarity in pictures.
1Set the Mode dial to Capture.
2Slide the POWER switch to the right to
turn on the camera.
3Press the MENU button.
The LCD displays the main Menu screen.
4Press a button until the icon
is highlighted.
5Press the DO-IT button.
The LCD displays the Sharpness screen. The
current setting is checked (
ä).
6Press a button until the Sharpness
option you want is highlighted.
qSharp—highlights the edges in your
picture, so the edges stand out.
qStandard—makes no change to the
edges in your picture.
qSoft—blurs the edges in your picture,
so the edges blend in.
7Press the DO-IT button.
The main Menu screen reappears.
You can switch freely among the three
settings when taking pictures.
/
/
33
4
4 Reviewing Your
Pictures
Now that you have taken pictures with your camera, it is time to take a
look at them by setting the camera to Camera Review. With the camera,
you can:
qView your pictures and see how any custom features, if any, were
applied to the shot.
qMagnify the picture to check the detail.
qSelect specific pictures and quantities to be printed.
qProtect pictures from being deleted from your camera
memory card.
qDelete unwanted pictures to free up space on the camera
memory card.
qDisplay and run a slide show on the camera or on a television.
qView specific information about the picture.
34
Viewing Your Pictures
You can view each picture in full LCD size, or you can view up to three
smaller thumbnail-size pictures at a one time using the Filmstrip feature.
1Set the Mode dial to Review.
2Slide the POWER switch to the right to
turn on the camera.
The LCD displays the last picture taken with
the frame number, and the Print Order and
Protect icons, if activated.
3Use the buttons to scroll through
and view the pictures on the LCD.
4Press the MENU button to display the
filmstrip and the main Review screen.
The DC280 main Review screen has a
black bar across the top of the screen.
The Review Menu icons, filmstrip, and
memory bar appear over the current picture.
The filmstrip displays up to three
pictures at a time, in the order taken and
stored on the camera memory card.
5Use the buttons to scroll through
the filmstrip.
The picture on the filmstrip appears in the
LCD as the memory bar and picture locator
needle moves.
The memory bar indicates the amount of
space on the camera memory card. The
dark section represents the portion of the
card that is filled, while the needle
locator shows the position of picture on
the card.
6To exit, press the MENU button.
/
/
36
Selecting Pictures for Printing
You can scroll through and select certain pictures on the camera memory
card to print, as well as create an index of all of the pictures using the
Print Order feature. This feature is useful because it saves you time when
printing pictures from a KODAK Picture Maker System.
1Set the Mode dial to Review.
2Slide the POWER switch to the right to
turn on the camera.
The last picture taken appears on the
LCD screen.
3Press the MENU button.
The main Review Menu screen appears.
4Press a button until the
icon is highlighted.
5Press the DO-IT button.
The Print Order screen appears.
6Press a button until the picture you
want is highlighted on the filmstrip.
7Press a button until the Print
Order option you want is highlighted.
qCURRENT PICTURE or EDIT
PICTURE—marks the picture
currently selected on the filmstrip.
qEXIT—returns you to the main
Review screen.
qALL PICTURES or EDIT ALL—
marks all of the pictures on the
camera memory card.
qINDEX PRINT or EDIT INDEX
PRINT—prints thumbnails of all the
pictures on the camera memory card.
/
/
/
37
4
Cancelling Pictures for Printing
If you have second thoughts about the pictures you have selected to print,
you can go back and cancel individual pictures or the entire order.
8Press the DO-IT button.
The Copies screen appears, unless you
selected the Index Print option, which
returns you to the main Review screen.
9Press a button until the desired
number of prints you want appears.
10 Press the DO-IT button.
The print order is accepted and the Print
Order icon appears in the LCD of each
picture marked for printing. The main Print
Order screen reappears.
11 To exit Print Order, highlight EXIT, then
press the DO-IT button.
1Press a button until the Print
Order option you want is highlighted.
qCANCEL CURRENT—cancels the
print order for the selected picture.
qEXIT—returns you to the main
Review Menu screen.
qCANCEL PRINT ORDER—cancels
all the print orders for the pictures.
qCANCEL INDEX PRINT—cancels
the print order for the index print.
2Press the DO-IT button.
The print order is cancelled and the Print
Order icon is removed. The main Print Order
screen reappears.
3To exit Print Order, highlight EXIT, then
press the DO-IT button.
/
/
38
Protecting Your Pictures
You can safeguard your pictures from being deleted accidentally from the
camera memory card by using the Protect feature. This feature is very
useful if the camera and camera memory card are used by more than
one person.
1Set the Mode dial to Review.
2Slide the POWER switch to the right to
turn on the camera.
The last picture taken appears on the
LCD screen.
3Press the MENU button.
The main Review Menu screen appears.
4Press a button until the
icon is highlighted.
The Protect screen appears.
5Press a button until the picture you
want to protect is selected.
6Press the DO-IT button.
The picture appears on the LCD with the
Protect icon.
7To cancel a protected picture, select the
picture to be unprotected and press the
DO-IT button.
/
/
39
4
Deleting One or All of Your Pictures
If you decide that you do not like the pictures stored on the camera
memory card, or you just want to free up space, use the Delete feature to
remove one or all of the pictures on the card. If you have marked pictures
to be protected, they cannot be deleted until you turn off the Protect
feature. See page 38 for details.
1Set the Mode dial to Review.
2Slide the POWER switch to the right to
turn on the camera.
The last picture taken appears on the
LCD screen.
3Press the MENU button.
The main Review Menu screen appears.
4Press a button until the icon
is highlighted.
5Press the DO-IT button.
The Delete screen appears.
6Press a button until the picture you
want to delete is selected.
7Press a button until the Delete
option you want is highlighted.
qPICTURE—deletes the selected
picture from the camera memory card.
qEXIT—returns you to the main Review
screen without deleting the picture(s).
qALL PICTURES—deletes all of the
pictures on the camera memory card.
8Press the DO-IT button.
The picture(s) are deleted from the camera
memory card.
9To exit Delete, highlight EXIT, then press
the DO-IT button.
/
/
/
40
Running a Slide Show on Your Television
You can view your pictures on the camera LCD, or connect your camera
to a television and display your pictures to a large audience using the
Slide Show feature. The pictures appear on the television for a period of 1
to 99 seconds, a time you set from the camera. The slide show ends after
all the pictures have been shown; or, if you are using a Kodak-specified
AC adapter, the slide show continues until you stop it.
1Set the Mode dial to Review.
2Slide the POWER switch to the right to
turn on the camera.
The last picture taken appears on the
LCD screen.
3Press the MENU button.
The main Review Menu screen appears.
4Press a button until the icon
is highlighted.
5Press the DO-IT button.
The Slide Show Interval screen appears.
6Use the buttons to select the
number of seconds you want the pictures
to appear on the television.
If you want to view a slide show on the
camera LCD, press the DO-IT to start and
stop the slide show.
7Insert the video cable into the video-out
port on the side of your camera, and
connect the other end of the video cable to
the video-in port on the television.
8Turn on the television.
You may need to adjust the Video Out
setting to NTSC or PAL television signals.
See page 49 for details.
9Press the DO-IT button to start and stop
the slide show.
/
/
41
4
Viewing Information About a Picture
You can look up specific information about a picture using the Picture
Information feature. The information that appears is view-only.
1Set the Mode dial to Review.
2Slide the POWER switch to the right to
turn on the camera.
The last picture taken appears on the
LCD screen.
3Press the MENU button.
The main Review Menu screen appears.
4Press a button until the icon
is highlighted.
5Press the DO-IT button.
The Picture Info screen appears with that
picture’s information displayed.
qQuality
qResolution
qFile Name
qDirectory Name
qCapture Date/Time
qFlash
qAperture
qShutter Speed
The DC280 also displays information on
White Balance, Metering, and Exposure
Compensation settings for each picture.
6Press a button to view information
on other pictures.
7To exit Picture Information, press the
DO-IT button.
.
/
/
43
5
5 Personalizing
Your Camera
You can tailor your camera to fit whatever picture-taking needs you have.
When you set the camera to Camera Setup, you have the ability to
personalize your camera so it performs the way you want, each time you
use it. With the camera, you can:
qSet a camera response beep, so you get feedback from the camera
when you initiate an action.
qSelect a power-save setting to help conserve batteries.
qAccess camera information to view a complete history of your
cameras use.
qAdjust a language setting, so you can select the language with
which you are most comfortable working.
qFormat other camera memory cards so they work in your camera.
qSelect specific default settings, so your camera is always set for the
way you need to use it.
44
Setting a Response Beep
Your camera provides auditory feedback in the form of a beep anytime
the SHUTTER button is pressed, or when the camera cannot perform a
selected function. If you do not want auditory feedback, you can turn off
the beep. This can be especially useful when taking a picture of someone
off guard or of wildlife.
1Set the Mode dial to Camera Setup.
2Slide the POWER switch to the right to
turn on the camera.
The main Camera Setup screen appears.
3Press a button until the
icon is highlighted.
4Press the DO-IT button.
The Beep screen appears. The current setting
is checked (ä).
5Press a button until the Beep
option you want is highlighted.
qOFF—provides no auditory feedback.
qSELECTED ON—provides auditory
feedback when you press the
SHUTTER button, as well as
any warnings.
qALL ON—provides auditory
feedback anytime a button is pressed.
6Press the DO-IT button to accept the
changes and return to the main Camera
Setup screen.
/
/
45
5
Saving Camera Power
The Power Save feature helps extend battery life by shortening the time
that the camera power stays on when not in use. For your convenience,
the Power Save setting is activated to help conserve battery power. If
situations arise where you need the camera power to stay on for a longer
period of inactivity, such as connecting the camera to a computer, turn o
the Power Save feature to have more time to work before the camera
automatically shuts off.
1Set the Mode dial to Camera Setup.
2Slide the POWER switch to the right to
turn on the camera.
The main Camera Setup screen appears.
3Press a button until the icon
is highlighted.
4Press the DO-IT button.
The Power Save screen appears. The current
setting is checked (ä).
5Press a button until the Power
Save option you want is highlighted.
6Press the DO-IT button to accept the
changes and return to the main Camera
Setup screen.
/
/
46
Viewing Camera Information
Have you ever wondered how many pictures you have taken with your
camera or how many times the flash fired? The Camera Information
feature keeps a record for you.
1Set the Mode dial to Camera Setup.
2Slide the POWER switch to the right to
turn on the camera.
The main Camera Setup screen appears.
3Press a button until the
icon is highlighted.
4Press the DO-IT button.
The About screen appears.
The information that appears is
view-only and cannot be changed.
qFirmware Version—displays the
latest firmware version loaded into
the camera.
q# Images Captured—displays the
total number of pictures taken with
the camera.
q# Flash Fired—displays the total
number of times the flash fired in
the camera.
5Press the DO-IT button to return to the
main Camera Setup screen.
/
47
5
Selecting a Language for the Camera
You can select from many different languages for the camera. Once you
select a language, the text changes to reflect the language selected.
1Set the Mode dial to Camera Setup.
2Slide the POWER switch to the right to
turn on the camera.
The main Camera Setup screen appears.
3Press a button until the
icon is highlighted.
4Press the DO-IT button.
The Language screen appears. The current
setting is checked (ä).
5Press a button until the language
you want is highlighted.
The main Camera Setup screen reappears.
6Press the DO-IT button to accept the
changes and return to the main Camera
Setup screen.
/
/
48
Formatting Your Camera Memory Card
If you own camera memory cards that have been used in other digital
cameras, the card may not be properly formatted for use in your camera,
or that data on the card may become corrupted. When these issues arise,
your camera indicates that the camera memory card needs to be
formatted.
When you format a camera memory card, all of the information on the
card is erased. This includes any borders supplied on the card. You can
also create and add borders to the camera memory card. For more
information, refer to the KODAK DC240/DC280 Border Transfer
Application online help or the ReadMe file.
1Set the Mode dial to Camera Setup.
2Slide the POWER switch to the right to
turn on the camera.
The main Camera Setup screen appears.
3Press a button until the icon
is highlighted.
4Press the DO-IT button.
The Format Memory Card screen appears.
5Press a button until CONTINUE
FORMAT is highlighted.
6Press the DO-IT button to format the
camera memory card and return to the
main Camera Setup screen.
/
/
49
5
Adjusting the Video Out Signal
You can set your camera so it is compatible with NTSC or PAL video
signals. The Video Out feature needs to be set correctly if you plan on
running a slide show of the pictures from the camera on a television or
video monitor. For information on setting up a slide show, see page 40.
1Set the Mode dial to Camera Setup.
2Slide the POWER switch to the right to
turn on the camera.
The main Camera Setup screen appears.
3Press a button until the
icon is highlighted.
4Press the DO-IT button.
The Video Out screen appears. The current
setting is checked (ä).
5Press a button until the video out
option you want is highlighted.
qNTSC—used in most countries
except Europe. The United States
uses NTSC.
qPAL—used in European countries.
6Press the DO-IT button to accept the
change and return to the main Camera
Setup screen.
/
/
50
Adjusting the Camera Default Settings
You can customize your camera so specific settings are activated
automatically each time you turn on the camera. Select settings for Flash,
White Balance, Exposure Compensation, Borders, and Effects to suit your
particular picture-taking needs.
Setting a Border Default
You can adjust the camera so your favorite frame or graphic, supplied on
the camera memory card is added to each picture you take. This is handy
if you take mostly celebration pictures, such as birthdays or children’s
events. For more information about the Borders feature, see page 23.
1Set the Mode dial to Camera Setup.
2Slide the POWER switch to the right to
turn on the camera.
The main Camera Setup screen appears.
3Press a button until the
icon is highlighted.
4Press the DO-IT button.
The Borders Default screen appears. The
current setting is checked (
ä).
5Press a button until the Border
option you want is highlighted.
No Borders is the main default setting.
6Press the DO-IT button to accept the
changes and return to the main Camera
Setup screen.
/
/
51
5
Setting a Flash Default
You can adjust your camera so it is set to a specific flash setting every time
you turn on the camera. For more information about the Flash setting, see
page 15.
1Set the Mode dial to Camera Setup.
2Slide the POWER switch to the right to
turn on the camera.
The main Camera Setup screen appears.
3Press a button until the icon
is highlighted.
4Press the DO-IT button.
The Flash Default screen appears. The
current setting is checked (
ä).
5Press a button until the Flash
option you want is highlighted.
qAUTO (Main Default)—ash res
when needed. Ideal for everyday
picture-taking situations.
qFILL—flash fires every time you take
a picture. Ideal for pictures outside
under heavy shade.
qRED EYE—flash fires once so the
eyes become accustomed to the flash,
then fires again when the picture is
taken. Ideal for pictures of people.
qOFF—flash does not fire. Ideal for
taking pictures where flash is
prohibited.
6Press the DO-IT button to accept the
changes and return to the main Camera
Setup screen.
/
/
52
Setting a White Balance Default
If you are always using your camera indoors where flash is prohibited,
you can set the camera so it is balanced for the type of light source that
you take pictures under. For more information about the White Balance
feature, see page 27.
1Set the Mode dial to Camera Setup.
2Slide the POWER switch to the right to
turn on the camera.
The main Camera Setup screen appears.
3Press a button until the
icon is highlighted.
4Press the DO-IT button.
The White Balance Default screen appears.
The current setting is checked (
ä).
5Press a button until the White
Balance option you want is highlighted.
qAUTO (Main Default)—adjusts
automatically when ash is used.
Ideal for everyday pictures.
qDAYLIGHT—balances for daylight.
Ideal for indoor pictures under
natural lighting.
qTUNGSTEN—balances for the red-
orange color of household lighting.
qFLUORESCENT—balances for the
green color of fluorescent lighting.
6Press the DO-IT button to accept the
changes and return to the main Camera
Setup screen.
/
/
53
5
Setting an Exposure Compensation Default
You can adjust the Exposure Compensation setting so it is used every
time you turn on the camera. For more information about The Exposure
Compensation feature, see page 22.
1Set the Mode dial to Camera Setup.
2Slide the POWER switch to the right to
turn on the camera.
The main Camera Setup screen appears.
3Press a button until the
icon is highlighted.
4Press the DO-IT button.
The Exposure Compensation Default
screen appears.
5Press a button until the exposure
compensation number you want
is highlighted.
If your pictures are too dark, increase (+)
the exposure number.
If your pictures are too light, decrease (-)
the exposure number.
The main default setting for Exposure
Compensation is 0.0.
6Press the DO-IT button to accept the
changes and return to the main Camera
Setup screen.
/
/
54
Setting an Effect Default
If you work for a newspaper or in an office environment where you need
to record lecture slides, you can adjust your camera so it takes pictures in
black and white, sepia tone, or to highlight text every time you turn on
the camera. For more information about the Effects feature, see page 24.
1Set the Mode dial to Camera Setup.
2Slide the POWER switch to the right to
turn on the camera.
The main Camera Setup screen appears.
3Press a button until the
icon is highlighted.
4Press the DO-IT button.
The Effects Default screen appears. The
current setting is checked (
ä).
5Press a button until the Effects
option you want is highlighted.
qNo Effect (Main Default)—captures
pictures in full color.
qBlack & White—captures pictures in
black-and-white. Ideal for taking
pictures for newspapers.
qSepia—captures pictures in a red-
brown tone. Ideal for giving pictures
an antique look.
qDocument—increases picture
contrast so text stands out.
6Press the DO-IT button to accept the
changes and return to the main Camera
Setup screen.
/
/
55
5
Setting an Auto ISO Default (DC280 only)
If you are always using your camera indoors without flash, you can set
the camera so it uses a faster shutter speed to help avoid blurry pictures
from camera movement. For more information about the Auto ISO
feature, see page 29.
1Set the Mode dial to Camera Setup.
2Slide the POWER switch to the right to
turn on the camera.
The main Camera Setup screen appears.
3Press a button until the
icon is highlighted.
4Press the DO-IT button.
The Auto ISO Default screen appears. The
current setting is checked (
ä).
5Press a button until the Auto
ISO option you want is highlighted.
qOFF (Main Default)—camera
maintains optimal shutter speed
ranges. Ideal for everyday pictures.
qON—camera increases shutter speed
when flash is off. Ideal for indoor
pictures in less than optimal lighting.
6Press the DO-IT button to accept the
changes and return to the main Camera
Setup screen.
/
/
57
6
6 Installing Your
Software
The KODAK DC240/DC280 Installer Software (Installer) included with
your camera contains software for Windows-based personal computers
and Macintosh computers. These applications provide a variety of
features that let you access and use the pictures stored on the camera
memory card. Detailed information on using the software can be found in
the online help supplied with each software application.
Windows-Based System Requirements
qWindows 95, Windows 98, or Windows NT 4.0 operating system.
qPersonal computer with Pentium 90-MHz microprocessor
(minimum) with CD-ROM drive.
qColor display monitor with a minimum resolution of 640 x 480
(1024 x 768 preferred) and thousands of colors recommended.
q16 MB or more of available RAM.
q70 MB of hard disk space available.
qAvailable serial port, USB port (Windows 98 only), or CF
card reader.
Macintosh System Requirements
qPowerPC-based Macintosh computer, with CD-ROM drive.
qOperating system 7.6.1 or later for serial connection. Operating
system 8.5.1 or later for USB connection.
qColor display monitor with a minimum resolution of 640 x 480
(1024 x 768 preferred) and 8-bit color
(16-bit or 24-bit recommended).
q16 MB or more of available RAM.
q70 MB of hard disk space available.
qAvailable serial port, USB port, or CF card reader.
58
Kodak Software for Windows-Based Computers
There are four Kodak software applications supplied with the camera for
use on a Windows-based computer. They are:
qKODAK DC240/DC280 Camera Mounter Software (Mounter)—
provides an easy way to view pictures from the camera memory
card and copy them to your computer.
qKODAK DC240/DC280 Digital Access Software (TWAIN
Acquire)—provides a quick way to view and copy pictures from
the camera memory card to a TWAIN-compliant host software
program, such as ADOBE Photoshop or ADOBE PhotoDeluxe.
qKODAK DC240/DC280 Camera Controls Software (Camera
Controls)—lets you change camera, capture, and communications
settings from the computer.
qKODAK DC240/DC280 Border Transfer Application (Border)—
lets you convert existing BMP files into the border file format
(BDR) and copy the borders to the camera memory card and to the
hard disk.
Software Overview
A brief overview of the software is listed below. Detailed information on
the software is available in the online help for each application.
Feature Mounter TWAIN
Acquire
Camera
Controls Border
View thumbnail images ✔ ✔
Transfer pictures ✔ ✔
Display picture information ✔ ✔
Open pictures on hard drive ✔
Access Camera Controls ✔ ✔ ✔
Take a picture ✔
Delete pictures ✔ ✔
Format camera memory card ✔ ✔
Add borders to camera
memory card
✔
Copy borders to hard disk ✔
59
6
Kodak Software for Macintosh Computers
There are three Kodak software applications supplied with the camera for
use on a Macintosh computer. They are:
qKODAK DC240/DC280 Picture Transfer Application (Picture
Transfer)—provides an easy way to view pictures from the camera
memory card and copy them to your computer.
qKODAK DC240/DC280 Digital Access Software (Plug-In
Acquire)—provides a quick way to view and copy pictures from
the camera memory card to any application that supports the
ADOBE Photoshop plug-in module, such as ADOBE Photoshop or
ADOBE PhotoDeluxe.
qKODAK DC240/DC280 Border Transfer Application (Border)—
lets you convert existing BMP and PICT files into the border file
format (BDR) and copy the borders to the camera memory card
and to the hard disk.
Software Overview
A brief overview of the software is listed below. Detailed information on
the software is available in the online help for each application.
Feature Picture
Transfer
Plug-In
Acquire Border
View thumbnail images ✔ ✔
Transfer pictures ✔ ✔
Display picture information ✔ ✔
Change camera settings ✔
Take a picture ✔
Change camera Capture settings ✔
Delete pictures ✔ ✔
Add borders to camera memory card ✔
Copy borders to hard disk ✔
60
Installing the Software
While the Installer is automatically loading your software, take a few
minutes to fill out and send in the camera product registration card. This
allows you to receive information regarding software updates and
registers some of the products included with the camera.
1Close all other software programs before starting the Installer.
2Place the Installer CD into the CD-ROM drive.
3Load the software.
On a Windows-based computer—if Auto Play is enabled, the first
install window automatically appears. If the first install window does
not automatically appear, choose Run from the Start menu. In the Run
dialog box, type the drive letter that contains the CD and type
\setup.exe. For example: d:\setup.exe
On a Macintosh computer—double-click the Installer icon.
4Follow the on-screen instructions to install the software.
5If prompted, restart the computer when the software installation
is complete.
Detailed information on all the Kodak software is included in the online
help for each application.
61
7
7 Connecting
Your Camera
In order for you to transfer pictures taken with your camera, you first
need to connect the camera to your computer. The camera can
communicate with your computer using:
qRS-232 serial cable connection for Windows-based computers.
qSerial cable or adapter plug for Macintosh computers.
qUniversal Serial Bus (USB) cable connection for both Windows
98-based personal computers and Macintosh computers.
qCard reader. If you do not have a card reader, you can purchase
one as an accessory. For details about available accessories, ask a
dealer of Kodak products, or visit our Website at
http://www.kodak.com/go/accessories.
Once the camera is connected to a computer and any required software is
installed, you are ready to transfer pictures from the camera to your
computer. Refer to the online help for information on each software
application supplied with the camera.
62
Using a Serial Cable Connection
The most common means of connecting the camera to your computer is
by serial cable connection. When connecting the camera, it is a good idea
to use a Kodak-specified AC adapter (see page 5).
Connecting to a Windows-Based Computer
An RS-232 serial cable is provided so you can connect your camera to a
Windows-based computer.
1Set the Mode dial to Connect.
2Plug the appropriate end of the serial
cable into an available 9-pin serial port on
the computer.
Serial ports are usually labeled COM1
and COM2, or A and B. If your computer
has a 25-pin port, you need to use a 9-pin
adapter (available at your local computer
store) and attach it to the port before
attaching the serial cable to the computer.
If the ports are not labeled, see your
computer User’s Guide for a diagram that
illustrates all of the external ports.
3Open the serial/USB port door on the
side of the camera.
4Plug the other end of the serial cable into
the camera serial port.
5Slide the POWER switch to the right to
turn on the camera.
If you get a message on your computer
stating that you are not connected, refer to
the Serial.PDF document installed with
the software, or the online help for
troubleshooting information.
63
7
Connecting to a Macintosh Computer
Either a serial cable for a Maintosh computer or adapter plug for use with
the RS-232 serial cable is provided so you can connect your camera
through a serial port on a Macintosh computer.
1Set the Mode dial to Connect.
2Connect the serial port adapter plug into
the 9-pin end of the serial cable.
3Plug the adapter end of the serial cable
into an available serial port on the back of
the computer.
If your camera came with a serial cable for
a Macintosh computer instead of the
serial adapter plug, connect the end of the
serial cable labelled MAC into the
available serial port on the back of the
computer.
Serial ports on Macintosh computers are
usually referred to as modem or
printer ports.
If the ports are not labeled, see your
computer User’s Guide for a diagram that
illustrates all of the external ports.
4Open the serial/USB port door on the
side of the camera.
5Plug the other end of the serial cable into
the camera serial port.
6Slide the POWER switch to the right to
turn on the camera.
If you get a message on your computer
stating that you are not connected, refer to
the Connect.PDF document installed with
the software, or the online help for
troubleshooting information.
64
Using a USB Cable Connection
If you have a personal computer and are running Windows 98, or a
Macintosh computer, you may be able to connect the camera using a
Universal Serial Bus connection. The USB interface provides an easy and
faster alternative to serial cable connection. However, since USB
connections are relatively new, Kodak only recommends and supports
using the camera with the systems listed above. When connecting the
camera, it is a good idea to use a Kodak-specified AC adapter
(see page 5).
1Set the Mode dial to Connect.
2Plug the appropriate end of USB cable into
the port on the computer with the USB
symbol.
If the port is not labeled, see your
computer User’s Guide for a diagram that
illustrates all of the external ports.
3Open the serial/USB port door on the side
of the camera.
4Plug the other end of the USB cable into
the camera serial/USB port.
5Slide the POWER switch to the right to
turn on the camera.
If you get a message on your computer
stating that you are not connected, refer to
the USB.PDF document installed with the
software, or the online help for
troubleshooting information.
66
Starting the Kodak Software for Macintosh Computers
With the camera connected to your computer, you are now ready to open
and use the software that you installed in Chapter 6. For detailed
information on using the software, refer to the online help for
each application.
Opening Picture Transfer Application
1In the KODAK DC240/DC280 Folder, double-click on the Picture
Transfer Application folder.
The Picture Transfer icon appears.
2Double-click on the Picture Transfer icon.
The main Picture Transfer window appears.
Opening Digital Access Software (Plug-In Acquire)
1Open a Plug-In-compliant application, such as ADOBE Photoshop or
ADOBE PhotoDeluxe.
2Choose File –> Acquire –> KODAK DC240/DC280 Acquire.
The main Digital Access window appears.
Opening Border Transfer Software
1In the DC240/DC280 Folder, double-click on the Border Transfer
Application folder.
2Double-click on the Border Transfer icon.
The main Border Transfer window appears.
67
7
Navigating to Your Pictures
Pictures are stored on the camera memory card according to a standard
agreed upon by many camera manufacturers. This standard allows you
to use the camera memory card in different cameras.
Each Kodak application supplied on the Installer CD guides you to your
pictures on the camera memory card; however, if you use a card reader to
retrieve your pictures or you cannot locate your pictures using the
software provided, the following description of the camera file structure
may be helpful.
qRoot level folder is named \DCIM. Each time you turn on the
camera or insert a camera memory card, any empty folders within
the \DCIM folder are removed.
qTypically, all pictures taken with the camera are stored in the
\DCIM\100DC240 folder for the DC240 camera or
\DCIM\100DC280 folder for the DC280 folder.
qPictures are numbered in the order in which they are taken. The
first picture is named DCP_0001.JPG, which is stored in the
\DCIM\100DC240 folder for the DC240 or \DCIM\100DC280
folder for the DC280.
qWhen you transfer pictures to the computer, or delete pictures
from the camera memory card, the camera uses consecutive
numbers for subsequent pictures. For example, if the last picture
taken was DCP_0007.JPG, the next picture is DCP_0008.JPG.
qWhen you insert the camera memory card into another DC240/
DC280 camera, the next picture is derived by incrementing either
the highest existing picture number, or the highest picture number
previously taken by that camera.
Once you take picture DCP_9999.JPG in the \DCIM\100DC240 folder or
\DCIM\100DC280 folder, subsequent pictures will appear in a new
folder (\DCIM\101DC240 or \DCIM\101DC280) on the camera memory
card, beginning with picture DCP_0001.JPG.
If you use the camera memory card in a camera other than the DC240/
DC280 camera, and that camera manufacturer adheres to this file
structure standard, the \DCIM folder will contain a folder named by that
camera. Any pictures taken with that camera are stored in the folder
using the naming conventions established by the manufacturer. For more
information, refer to the documentation that accompanied that camera.
70
Getting Better Results from Your Printer
You may notice that the colors on your computer screen do not always
match those in your documents or prints. This is because monitors and
printers use different color systems.
You may be able to achieve more predictable results in your printed
documents by:
qImproving the quality of your paper. Copier paper may not offer
the same results as coated paper or paper made especially for
inkjet printers.
qAdjusting your printer software settings.
qUsing fresh ink cartridges. Do not use ink cartridges beyond their
life expectancy.
Remember these few tips when it comes time to print your document:
qColor printing takes more time. More complex pictures increase
the printing and drying time.
qColor printing is more memory intensive than black and white. If
your computer gives you an insucient memory message, you
may need to close some applications, change some settings, or add
additional memory.
qColor prints may not photocopy as clearly as black and white. If
you plan to photocopy documents, you should consider printing
the document in grayscale. This setting is usually changed from the
Print dialog box.
qResizing the picture to a smaller size or printing the picture on
glossy paper may increase the quality of the print.
To improve the quality of your prints, you may want to print your
pictures on KODAK Inkjet Snapshot Paper (Snapshot Paper).
Snapshot Paper is made to work with most inkjet printers to give
you clearer, crisper, and more detailed images on your prints.
72
Camera Communications
Problem Cause Solution
Computer cannot
communicate with the
camera.
Camera power is
off.
Turn on the camera.
See page 2.
The Mode dial is not
set to Connect.
Set the Mode dial to
Connect.
Some Advanced
Power Management
utilities on laptops
can turn off ports to
save battery life.
See the Power
Management
section of your
laptop User’s Guide
to disable this
feature.
Conict with
another serial
device, such as a
modem or PDA
Refer to the serial
communication or
corresponding
section of your
computer modem,
PDA, and/or
operating system
User’s Guide.
Camera is not
connected to serial
or USB cable, or
cable is not
connected to the
computer serial or
USB port.
Connect serial or
USB cable to camera
and computer port.
Refer to the online
help, or see Chapter
7, “Connecting Your
Camera” on page
61.
Port settings in
software may be set
to the incorrect
COM port.
Change the COM
port settings to
Auto-Search or to a
specific COM port.
See the online help.
73
8
Camera
Problem Cause Solution
Ready light does not turn
on and the camera does not
work.
Batteries are low or
dead.
Batteries need to be
replaced (see page
2), or recharged (see
page 4).
Camera is not
turned on.
Turn on the camera.
See page 2.
Red ready light comes on
and camera does not take a
picture.
Batteries are low. Batteries need to be
replaced (see page
2), or recharged (see
page 4).
Camera memory
card is full
Transfer pictures to
your computer,
delete pictures on
the card (see page
39), or insert a card
with available
memory
(see page 6).
Red ready light is blinking. Flash is not charged. Wait for the flash to
charge.
Green ready light is
blinking and camera takes a
picture.
Auto Focus is not
locked
Release the
SHUTTER button
and recompose you
picture. See page 11.
Green ready light is
blinking and camera does
not take a picture
Picture is being
processed and saved
to camera memory
card.
Wait for the picture
to complete
processing.
74
Camera
Problem Cause Solution
SHUTTER button does not
work.
Camera is not
turned on.
Turn on the camera.
See page 2.
Mode dial is not set
to Capture.
Set the Mode dial to
Capture.
Ready light is
blinking. Camera is
processing picture.
Wait until Ready
light stops blinking
before attempting to
take another picture.
The Status Display
reads Full. The
camera memory
card is full.
Transfer pictures to
your computer,
delete pictures on
the card (see page
39), or insert a card
with available
memory
(see page 6).
Camera does not turn on. Batteries are not
properly installed.
Remove and
reinstall the
batteries. See page 2.
Batteries are low or
dead.
Batteries need to be
replaced (see page
2), or recharged (see
page 4).
75
8
Camera
Problem Cause Solution
Part of the picture is
missing.
Something was
blocking the lens
when the picture
was taken.
Keep hands, fingers,
or other objects
away from the lens
when taking
pictures.
Your eye or the
picture was not
centered correctly in
the viewfinder.
Leave space around
subject when
centering picture in
viewfinder.
Camera Close-Up is
activated without
using Preview.
Activate Preview
when using the
Close-Up feature.
See page 17.
Picture is too dark. Flash is not on or
did not function.
Turn on the flash.
See page 15. Check
the flash default
setting. See page 51.
The subject is too far
away for the flash to
have an effect.
Move so there is no
more than 13 ft
(4.0 m) between the
camera and the
subject.
The subject is in
front of a bright
light.
Change your
position so the light
is not behind the
subject.
The Exposure
Compensation is set
incorrectly.
Increase the
Exposure
Compensation. See
page 22. Check the
Exposure
Compensation
default setting. See
page 53.
The camera
Metering setting is
set to the
Center-Weighted.
Change the
Metering setting to
Multi-Pattern. See
page 28.
76
Camera
Problem Cause Solution
Picture is too light. The flash is not
needed.
Change to Auto
flash. See page 15.
Check the flash
default setting. See
page 51.
The subject is too
close when the flash
was used.
Move so there is at
least 1.6 ft (0.5 m)
between the camera
and the subject.
The light sensor is
covered.
Hold the camera so
your hands or other
objects do not cover
the light sensor.
The Exposure
Compensation is set
incorrectly.
Decrease the
Exposure
Compensation. See
page 22. Check the
Exposure
Compensation
default setting. See
page 53.
Stored pictures are
damaged.
The camera memory
card was removed
when the Ready
light was blinking.
Make sure the
Ready light is not
blinking before
removing the card.
Picture is black and white,
sepia toned, or has too
much contrast.
The Effects setting is
set incorrectly.
Change the Effects
setting to No Effects.
See page 24. Check
the Effects default
setting. See page 54.
77
8
Camera
Problem Cause Solution
Pictures remaining number
does not decrease after
taking a picture.
The image
Resolution and
Quality settings
does not take up
sufficient space to
decrease the picture
remaining number.
The camera is
operating normally.
Continue taking
pictures.
Picture is not clear. The lens is dirty. Clean the lens. See
page 90.
Subject too close
when taking picture
Stand at least .82 ft
(.25m) in wide
angle, 1.6 ft (.5m) in
telephoto.
Subject or the
camera moved
while the picture
was taken.
Hold camera steady
until the picture is
taken.
The subject is too far
away for the flash to
be effective.
Move so the subject
is less than 13 ft
(4.0 m) away.
The Sharpness
setting may be set
incorrectly.
Change the
Sharpness setting to
Standard.
See page 30.
Picture is tinted green, blue,
or red-orange.
The White Balance
setting is set
incorrectly.
Change the White
Balance setting to
Auto. See page 27.
Check the White
Balance default
setting. See page 52.
78
LCD Messages
Message Cause Solution
Memory Card is Full. Memory card is full
and cannot hold
additional pictures
Transfer pictures to
your computer,
delete pictures on
the card (see page
39), or insert a card
with available
memory
(see page 6).
No Memory Card
Available.
There is no memory
card inserted in the
camera.
Insert a memory
card into the
camera. See page 6.
Memory Card is
Corrupted/Unreadable.
Memory card is
corrupted.
Insert a new (see
page 6) or reformat
the memory card
(see page 48).
Camera needs service. The camera is
malfunctioning.
Have the camera
serviced.
80
Customer Support
If you have questions concerning the operation of Kodak software or the
camera, you may speak directly to a customer support representative.
Have the camera connected to your computer, its serial number ready,
and be at your computer when you call.
qU.S. and Canada—call toll free, 1-888-375-6325, between the hours
of 9:00 a.m. and 8:00 p.m. (Eastern Standard Time) Monday
through Friday.
qEurope—call the Kodak Digital Imaging Support Centre toll free
number associated with your location, or the U.K. toll line,
44-0-131-458-6714, between the hours of 09.00 and 17.00 (GMT/
CET) Monday through Friday.
qOutside the U.S., Canada, and Europe—call the number on the
following pages that is associated with your location.
Country Help number Fax
Argentina 54-1-808-300 54-1-808-3328
Australia 1-800-674-831 61-3-9353-2092
Austria 0179-567-357 44-0-131-458-6962
Belgium 02-713-14-45 44-0-131-458-6962
Brazil 0-800-15-0000 55-12-331-8571
Caribbean 78-7-757-5500 78-7-757-8760
Chile 56-2-697-2000 56-2-697-0310
China–Shanghai 8621-64720888 8621-64726582
China–Beijing 8610-63471155 8610-63475641
Colombia 57-1-629-0266 57-1-629-0673
Denmark 3-848-71-30 44-0-131-458-6962
Dominican Republic 809-563-1252 809-563-1264
Egypt 20-2-394-2205 20-2-393-1119
Eire 01-407-3054 44-0-131-458-6962
France 01-55-1740-77 44-0-131-458-6962
Finland 0800-1-17056 44-0-131-458-6962
Germany 069-5007-0035 44-0-131-458-6962
Greece 00800-44125605 44-0-131-458-6962
Hong Kong 852-2564-9777 852-2564-9753
83
10
10 Warranty and
Regulatory
Information
Warranty Time Period
Kodak warrants the KODAK DC240 Zoom Digital Camera and
KODAK DC280 Zoom Digital Camera to be free from malfunctions and
defects in both materials and workmanship for one year from the date
of purchase.
Warranty Repair Coverage
This warranty will be honored within the geographical location that the
product was purchased.
If the equipment does not function properly during the warranty period
due to defects in either materials or workmanship, Kodak will, at its
option, either repair or replace the equipment without charge, subject to
the conditions and limitations stated herein. Such repair service will
include all labor, as well as any necessary adjustments and/or
replacement parts.
If replacement parts are used in making repairs, these parts may be
remanufactured or may contain remanufactured materials. If it is
necessary to replace the entire system, it may be replaced with a
remanufactured system.
Kodak will also provide telephone assistance during the warranty period.
84
Limitations
WARRANTY SERVICE WILL NOT BE PROVIDED WITHOUT DATED
PROOF OF PURCHASE. PLEASE RETURN THE WARRANTY
REGISTRATION CARD WITHIN 30 DAYS OF PURCHASE.
THIS WARRANTY BECOMES NULL AND VOID IF YOU FAIL TO
PACK YOUR DC240/DC280 CAMERA IN A MANNER CONSISTENT
WITH THE ORIGINAL PRODUCT PACKAGING AND DAMAGE
OCCURS DURING PRODUCT SHIPMENT.
THIS WARRANTY DOES NOT COVER: CIRCUMSTANCES BEYOND
KODAK’S CONTROL; SERVICE OR PARTS TO CORRECT PROBLEMS
RESULTING FROM THE USE OF ATTACHMENTS, ACCESSORIES OR
ALTERATIONS NOT MARKETED BY KODAK; SERVICE REQUIRED
AS THE RESULT OF UNAUTHORIZED MODIFICATIONS OR
SERVICE; MISUSE, ABUSE; FAILURE TO FOLLOW KODAK’S
OPERATING, MAINTENANCE OR REPACKAGING INSTRUCTIONS;
OR FAILURE TO USE ITEMS SUPPLIED BY KODAK (SUCH AS
ADAPTERS AND CABLES).
KODAK MAKES NO OTHER WARRANTIES, EXPRESS, IMPLIED, OR
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
FOR THIS EQUIPMENT OR SOFTWARE.
REPAIR OR REPLACEMENT WITHOUT CHARGE ARE KODAK’S
ONLY OBLIGATION UNDER THIS WARRANTY. KODAK WILL NOT
BE RESPONSIBLE FOR ANY SPECIAL, CONSEQUENTIAL OR
INCIDENTAL DAMAGES RESULTING FROM THE PURCHASE, USE,
OR IMPROPER FUNCTIONING OF THIS EQUIPMENT REGARDLESS
OF THE CAUSE. SUCH DAMAGES FOR WHICH KODAK WILL NOT
BE RESPONSIBLE INCLUDE, BUT ARE NOT LIMITED TO, LOSS OF
REVENUE OR PROFIT, DOWNTIME COSTS, LOSS OF USE OF THE
EQUIPMENT, COST OF ANY SUBSTITUTE EQUIPMENT, FACILITIES
OR SERVICES, OR CLAIMS OF YOUR CUSTOMERS FOR SUCH
DAMAGES.
DEPENDING ON YOUR GEOGRAPHICAL LOCATION, SOME
LIMITATIONS AND EXCLUSIONS MAY NOT APPLY.
85
10
Application Support
For application specic support, contact your reseller, systems integrator,
software manufacturer, or dealer.
How to Obtain Service
Visit us on the Internet at http://www.kodak.com.
Please refer to the Chapter 9 “Where to Get Help” on page 79 for the
support number designated to your location.
When returning a camera for repair, pack the camera in its original
packaging materials. A problem report should also be enclosed with the
equipment. If the original packaging has been discarded or is not
available, packaging will be at the owner's expense.
Unless a specific Kodak warranty is communicated to the purchaser in
writing by a Kodak company, no other warranty or liability exists beyond
the information contained above, even though defect, damage or loss
may be caused by negligence or other act.
To obtain warranty repair service contact your local Kodak
representative. For assistance, refer to Chapter 9 “Where to Get Help” on
page 79 for information.
86
Regulatory Information
FCC Compliance and Advisory
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: 1) this device may not cause harmful
interference, and 2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy
and, if not installed or used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of
the following measures: 1) reorient or relocate the receiving antenna; 2)
increase the separation between the equipment and the receiver; 3)
connect the equipment to an outlet on a circuit different from that to
which the receiver is connected; 4) consult the dealer or an experienced
radio/TV technician for additional suggestions.
Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment. Where shielded interface cables have been provided with the
product or specified additional components or accessories elsewhere
defined to be used with the installation of the product, they must be used
in order to ensure compliance with FCC regulation.
Canadian DOC Statement
DOC Class B Compliance—This digital apparatus does not exceed the
Class B limits for radio noise emissions from digital apparatus set out in
the radio interference regulations of the Canadian Department of
Communications.
Obervation des normes-Class B—Le présent appareil numérique n’émet
pas de bruits radioélectriques dépassant les limites applicables aux
appareils numériques de la Classe B prescrites dans les règlements sur le
brouillage redioélectrique édictés par le Ministère des Communications
du Canada.
88
DC240 Camera Specifications
DC240 Camera
Pixel Resolution CCD 1344 x 971=1.31 millions of pixels
(total number of pixels)
High 1280 x 960=1,228,800
Standard 640 x 480=307,200
Color 24-bit, millions of colors
Picture File Format Exif version 2.1 (JPEG base)
Picture Storage External memory only: ATA
compatible CompactFlash card
Viewfinder Real image
ASA/ISO Sensitivity 130
Flash Range Wide 1.6 ft to 13.1 ft (0.5 to 4.0 m)
TelePhoto 1.6 ft to 8.2 ft (0.5 to 2.5 m)
Lens Type Optical quality glass
Maximum
Aperture
Wide: F/2.8
TelePhoto: F/4.5
Zoom 6X:
3X Optical zoom
2X Digital zoom
Focal Length 39 to 117 mm (equivalent to 35mm
camera)
6 to 18 mm (actual)
Focus Distance Wide/TelePhoto: 1.6 ft (0.5 m) to
infinity
Close-Up: 0.82 ft (0.25 m) to
1.6 ft (0.5 m)
Power Batteries AA size 1.5-volt alkaline, or AA size
1.2-volt Ni-MH rechargeable
DC Input Kodak-specified AC adapter
Tripod Socket .25 in. (.006 m) threaded
Video Out NTSC or PAL
Dimensions Width 5.2 in. (133 mm)
Length 2.0 in. (51 mm)
Height 3.0 in. (76 mm)
Weight 11.6 oz. (328 g) without batteries
Operating Temperature 32 to 104° F (0 to 40° C)
89
11
DC280 Camera Specifications
DC280 Camera
Pixel Resolution CCD 1901 x 1212 = 2.3 millions of pixels
(total number of pixels)
High 1760 x 1168=2,055,680
Standard 896 x 592=530,432
Color 24-bit, millions of colors
Picture File Format Exif version 2.1 (JPEG base)
Picture Storage External memory only: ATA
compatible CompactFlash card
Viewfinder Real image
ASA/ISO Sensitivity 70
Flash Range Wide 1.6 ft to 9.8 ft (0.5 to 3.0 m)
TelePhoto 1.6 ft to 7.9 ft (0.5 to 2.4 m)
Lens Type Optical quality glass
Maximum
Aperture
Wide: F/3
TelePhoto: F/3.8
Zoom 6X:
2X Optical zoom
3X Digital zoom
Focal Length 30 to 60 mm (equivalent to 35mm
camera)
6.5 to 13 mm (actual)
Focus Distance Wide/TelePhoto: 1.6 ft (0.5 m) to
infinity
Close-Up: 0.82 ft (0.25 m) to
1.6 ft (0.5 m)
Power Batteries AA size 1.5-volt alkaline, or AA size
1.2-volt Ni-MH rechargeable
DC Input Kodak-specified AC adapter
Tripod Socket .25 in. (.006 m) threaded
Video Out NTSC or PAL
Dimensions Width 5.2 in. (133 mm)
Length 2.0 in. (52 mm)
Height 3.0 in. (76 mm)
Weight 12.1 oz. (342 g) without batteries
Operating Temperature 32 to 104° F (0 to 40° C)
90
General Maintenance and Safety
qTo keep from damaging your camera, avoid exposing it to moisture
and extreme temperatures.
qClean the outside of the camera by wiping with a clean, dry cloth.
Never use harsh or abrasive cleaners or organic solvents on the
camera or any of its parts.
qDo not allow any chemicals, such as suntan lotion to come into
contact with the painted surface of the camera.
qNever disassemble or touch the inside of the camera. This could
result in electrical shock.
qIf you notice smoke or a strange smell coming from the camera,
immediately turn off the camera, wait a few minutes until the
camera cools, and then remove the batteries.
qClean the lens and back LCD screen:
Do not use cleaning solutions unless they are designed specifically
for camera lenses. Do not wipe the camera lens or LCD screen
with chemically treated eyeglass lens tissue as it may scratch
the lens.
1 Blow gently on the lens or LCD screen to remove dust and dirt.
2 Moisten the lens or LCD screen by breathing lightly on it.
3 Wipe the lens or LCD screen gently with a soft, lint-free cloth or
an untreated lens-cleaning tissue.
Service agreements are available in some countries. Please contact a
dealer of Kodak products for more information.
91
11
Using Your Batteries
qKodak recommends KODAK Photolife AA Alkaline Batteries, or
KODAK Photolife AA Ni-MH Rechargeable Batteries for use in
the camera.
qRemove the batteries when the camera is stored for extended
periods of time.
qAlways follow your battery manufacturer’s directions fully. Do not
attempt to disassemble, short circuit, or subject the battery to high
temperature or fire.
qYour camera has been designed to operate correctly using a variety
of AA-size batteries currently available. These include 1.5-volt
alkaline and rechargeable 1.2-volt Nickel Metal Hydride (Ni-MH).
qReplace all batteries of a set at the same time. New batteries should
not be mixed with used ones. Do not mix rechargeable and
nonrechargeable batteries. Do not mix alkaline or Ni-MH types of
batteries. Do not mix different grades or brands of batteries. Failure
to observe this precaution may result in some batteries in a set
being driven beyond their normal exhaust point and increase their
possibility of leakage.
qNOT ALL BATTERIES ARE CREATED EQUAL! Battery life
depends significantly on age, usage conditions, type, brand, and
camera. Digital camera requirements are very demanding on
batteries. Not all batteries perform well under these challenging
conditions. In Kodak lab tests, Ni-MH rechargeable batteries
delivered outstanding results in a variety of conditions. Ni-MH
batteries are designed for high-demand devices, such as digital
cameras, and do not exhibit the “memory” effects seen with other
rechargeable technologies.
qIf you elect to use alkaline batteries in your camera, you will obtain
better performance from “photo-flash grade” alkaline batteries,
such as KODAK PHOTOLIFE alkaline batteries. These types of
batteries last more than twice as long in digital cameras as ordinary
alkaline batteries. Alkaline batteries are not rechargeable, do not
attempt to recharge them in the battery charger.
q When using your camera on battery power, we recommend you
limit continuous LCD Preview or Review to less than 10-minutes
per session. If you are using the camera for longer periods, it is
recommended that you do so with the camera powered by the
AC adapter.
92
qWhen disposing of batteries, follow the manufacturer’s
instructions and any local and national regulations. Kodak
suggests customers take advantage of any community battery
recycling programs that may exist in your area. Contact your local
waste remover or recycler for details.
Caution Hot Surface
qWhen removing batteries, allow to cool before touching, since the
batteries may be hot.
For charging Ni-Cd or Ni-MH batteries only, with a maximum
of 4 cells, and a maximum charge of 1450mAH.
Endast för att ladda Ni-Cd eller Ni-MH batterier, med maximalt
4 celler och en maximal laddning av 1450mAH.
Do not charge nonrechargeable batteries.
Återladda inte batterier som inte är laddningsbara.
Battery Charger Tips:
Product specificaties
| Merk: | Kodak |
| Categorie: | Fotocamera |
| Model: | DC280 |
Heb je hulp nodig?
Als je hulp nodig hebt met Kodak DC280 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Fotocamera Kodak
14 December 2024
14 December 2024
14 December 2024
14 December 2024
14 December 2024
30 Juli 2024
19 Maart 2024
22 November 2022
23 Juni 2023
19 Juni 2023
Handleiding Fotocamera
- Fotocamera Braun
- Fotocamera Philips
- Fotocamera HP
- Fotocamera Sony
- Fotocamera Samsung
- Fotocamera Casio
- Fotocamera Panasonic
- Fotocamera Nikon
- Fotocamera Epson
- Fotocamera Canon
- Fotocamera Daewoo
- Fotocamera JVC
- Fotocamera Medion
- Fotocamera Olympus
- Fotocamera VTech
- Fotocamera Acer
- Fotocamera Agfa
- Fotocamera Agfaphoto
- Fotocamera Alpine
- Fotocamera Anker
- Fotocamera Argus
- Fotocamera Avaya
- Fotocamera BenQ
- Fotocamera Blaupunkt
- Fotocamera Bresser
- Fotocamera Brinno
- Fotocamera Bushnell
- Fotocamera D-Link
- Fotocamera Daitsu
- Fotocamera Denver
- Fotocamera Dorr
- Fotocamera Easypix
- Fotocamera Elmo
- Fotocamera Emerson
- Fotocamera Eufy
- Fotocamera EverFocus
- Fotocamera Ezviz
- Fotocamera Flir
- Fotocamera Fluke
- Fotocamera Foscam
- Fotocamera Fuji
- Fotocamera Fujifilm
- Fotocamera GE
- Fotocamera Gembird
- Fotocamera General Electric
- Fotocamera GoPro
- Fotocamera Hasselblad
- Fotocamera Hikvision
- Fotocamera Hitachi
- Fotocamera HOLGA
- Fotocamera Kogan
- Fotocamera Konica
- Fotocamera Konica Minolta
- Fotocamera Konig
- Fotocamera Kyocera
- Fotocamera Kyocera Yashica
- Fotocamera Laserliner
- Fotocamera Leica
- Fotocamera Leitz Focomat IIc
- Fotocamera Lenco
- Fotocamera Lenovo
- Fotocamera Lexibook
- Fotocamera Logitech
- Fotocamera Lorex
- Fotocamera Maginon
- Fotocamera Mamiya
- Fotocamera Meade
- Fotocamera Minolta
- Fotocamera Minox
- Fotocamera Moto Mods (Motorola)
- Fotocamera Nedis
- Fotocamera Nest
- Fotocamera Netgear
- Fotocamera Pentax
- Fotocamera Polaroid
- Fotocamera Powerfix
- Fotocamera Praktica
- Fotocamera Pyle
- Fotocamera Ricoh
- Fotocamera Ring
- Fotocamera Rollei
- Fotocamera Sanyo
- Fotocamera SeaLife
- Fotocamera Sigma
- Fotocamera Silvercrest
- Fotocamera Sinji
- Fotocamera SJCAM
- Fotocamera Spypoint
- Fotocamera Sygonix
- Fotocamera Technaxx
- Fotocamera TP Link
- Fotocamera Traveler
- Fotocamera Trust
- Fotocamera Velleman
- Fotocamera Viewsonic
- Fotocamera Vivitar
- Fotocamera Voigtlander
- Fotocamera Yashica
- Fotocamera ZeissIkon
- Fotocamera Joy-it
- Fotocamera Optoma
- Fotocamera Oregon Scientific
- Fotocamera Ozito
- Fotocamera Creative
- Fotocamera Zenit
- Fotocamera Cobra
- Fotocamera Celestron
- Fotocamera Levenhuk
- Fotocamera Aplic
- Fotocamera Arlo
- Fotocamera Imou
- Fotocamera SereneLife
- Fotocamera Akaso
- Fotocamera Trevi
- Fotocamera Intel
- Fotocamera Contax
- Fotocamera Scosche
- Fotocamera Swann
- Fotocamera SPC
- Fotocamera ARRI
- Fotocamera Bauhn
- Fotocamera Prixton
- Fotocamera RunCam
- Fotocamera FIMI
- Fotocamera Ansco
- Fotocamera Cosina
- Fotocamera Exakta
- Fotocamera Zorki
- Fotocamera Aida
- Fotocamera AVerMedia
- Fotocamera Lumens
- Fotocamera Dahua Technology
- Fotocamera UniView
- Fotocamera Reolink
- Fotocamera EVE
- Fotocamera Azden
- Fotocamera Marshall Electronics
- Fotocamera Ergoguys
- Fotocamera Burris
- Fotocamera Liiv360
- Fotocamera Watec
- Fotocamera Silvergear
- Fotocamera Digital Watchdog
- Fotocamera Fantasea Line
- Fotocamera Vimar
- Fotocamera Getac
- Fotocamera Speco Technologies
- Fotocamera Z CAM
- Fotocamera General
- Fotocamera Strex
- Fotocamera Berger & Schröter
- Fotocamera AViPAS
- Fotocamera Hanwha
- Fotocamera Videology
- Fotocamera InfiRay
- Fotocamera Pelco
- Fotocamera Videotec
- Fotocamera Cambo
- Fotocamera Kobian
- Fotocamera Red Digital Cinema
- Fotocamera Alfatron
- Fotocamera Aquapix
- Fotocamera BZBGear
- Fotocamera Seek Thermal
- Fotocamera Ikegami
- Fotocamera MuxLab
- Fotocamera Ikelite
- Fotocamera Adeunis
- Fotocamera Hoppstar
- Fotocamera IOptron
- Fotocamera Moultrie
- Fotocamera PatrolEyes
- Fotocamera Camouflage
- Fotocamera HuddleCamHD
- Fotocamera AquaTech
- Fotocamera PTZ Optics
- Fotocamera Linhof
- Fotocamera GoXtreme
- Fotocamera KanDao
- Fotocamera Kraken Sports
Nieuwste handleidingen voor Fotocamera
12 Maart 2025
12 Maart 2025
10 Maart 2025
25 Februari 2025
24 Februari 2025
24 Februari 2025
10 Februari 2025
10 Februari 2025
10 Februari 2025
10 Februari 2025