Klipsch RW-10D Handleiding

Klipsch Subwoofer RW-10D

Lees hieronder de 📖 handleiding in het Nederlandse voor Klipsch RW-10D (30 pagina's) in de categorie Subwoofer. Deze handleiding was nuttig voor 48 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/30

IMPORTANT SAFETY INSTRUCTIONS

1. READ these instructions.

2. KEEP these instructions.

3. HEED all warnings.

4. FOLLOW all instructions.

5. DO NOT use this apparatus near water.

6. CLEAN ONLY with dry cloth.

7. DO NOT block any ventilation openings. Install in accordance

with the manufacturer's instructions.

8. Do not install near any heat sources such as radiators, heat

registers, stoves, or other apparatus (including amplifiers) that

produce heat.

9. DO NOT defeat the safety purpose of the polarized or grounding

type plug. A polarized plug has two blades with one wider than

the other. A grounding type plug has two blades and a third

grounding prong. The wider blade or the third prong are

provided for your safety. If the provided plug does not fit into

your outlet, consult an electrician for replacement of the

obsolete outlet.

10. PROTECT the power cord from being walked on or pinched,

particularly at plugs, convenience receptacles, and the point

where they exit from the apparatus.

11. ONLY USE attachments/accessories specified by the

manufacturer.

12. USE only with a cart, stand, tripod, bracket, or table specified

by the manufacturer, or sold with the apparatus. When a cart is

used, use caution when moving the cart/apparatus

combination to avoid injury from tip-over.

13. UNPLUG this apparatus during lightning storms or when

unused for long periods of time.

14. REFER all servicing to qualified service personnel. Servicing is

required when the apparatus has been damaged in any way,

such as power-supply cord or plug is damaged, liquid has been

spilled or objects have fallen into the apparatus, the apparatus

has been exposed to rain or moisture, does not operate

normally, or has been dropped.

15. DO NOT expose this apparatus to dripping or splashing and

ensure that no objects filled with liquids, such as vases, are

placed on the apparatus.

16. To completely disconnect this apparatus from the AC Mains,

disconnect the power supply cord plug from the AC receptacle.

17. The mains plug of the power supply cord shall remain readily

operable.

The exclamation point, within an equilateral triangle, is

intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in the

literature accompanying the product.

The lightning flash with arrowhead symbol within an equilateral

triangle, is intended to alert the user to the presence of

uninsulated “dangerous voltage” within the product's enclosure

that may be of sufficient magnitude to constitute a risk of

electrical shock to persons.

WARNING: To reduce the risk of fire or electrical shock, do not

expose this apparatus to rain or moisture.

No naked flame sources - such as candles - should be placed on

the product.

WARNING: Do Not Open! Risk of Electrical Shock. Voltages in this

equipment are hazardous to life. No user-serviceable parts inside.

Refer all servicing to qualified service personnel.

Place the equipment near a main power supply outlet and make

sure that you can easily access the power breaker switch.

WARNING: This product is intended to be operated ONLY from the

AC Voltages listed on the back panel or included power supply of the

product. Operation from other voltages other than those indicated

may cause irreversible damage to the product and void the product’s

warranty. The use of AC Plug Adapters is cautioned because it can

allow the product to be plugged into voltages in which the product

was not designed to operate. If the product is equipped with a

detachable power cord, use only the type provided with your product

or by your local distributor and/or retailer. If you are unsure of the

correct operational voltage, please contact your local distributor

and/or retailer.

INSPECTION

We want your new speaker system to look as good as it did

leaving the factory! Please check promptly for any transit

damage. Carefully unpack your new speaker system and verify

the components against the packing list. In extreme circum-

stances, items may have become damaged in transit. If any

damage is discovered, notify the delivery service and dealer

where the system was purchased. Make a request for

inspection, and follow their instructions for evaluation. Be sure

to keep the product’s original shipping carton.

POSITIONING YOUR REFERENCE SERIES SUBWOOFER

Klipsch powered subwoofers are designed to reproduce deep

bass and deliver the impact that makes your movies and music

come alive. Typically, optimum performance will result if you

place your subwoofer in a corner of the room on the same wall

as your front channel speakers (Refer to figures 1 & 2). Please

note that room placement can have a dramatic effect upon the

performance of your powered subwoofer. Corner placement, as

suggested above, will increase the amount of bass output, while

placing the subwoofer along the middle of a wall, or out in the

room will decrease the amount of bass output. Experiment with a

number of different placement options and control settings to

find the one that best suits your particular room and taste. When

choosing your subwoofer’s location, keep in mind that you will

need to connect the subwoofer’s built-in amplifier to an AC

power outlet.

RW-10d, RW-12d, RSW-10d

English

CONNECTIONS AND CONTROLS

CAUTION: Turn off your amplifier and your subwoofer before

making any connections. Do not connect both the “High

Level” and “Line Level” inputs at the same time as damage

to your equipment could result.

RW-10d / RW-12d / RSW-10d

“LINE IN” -This input is designed as the standard or default

input for the subwoofer. It accepts signals from the Left and

Right channel pre-amp, subwoofer or LFE outputs of your elec-

tronics via the RCA jack inputs. Connect to the “RIGHT” and/or

“LEFT/LFE” inputs on the subwoofer’s rear panel (Refer to

figures 3 and 5).

RW-10d / RW-12d

“HIGH LEVEL IN” - These connections can be used as an

alternate connection method to the line level hook up. Using

16- gauge or larger speaker wire, connect the Red “positive” (+)

terminal of your amplifier’s Left channel to the Red “positive” (+)

terminal of your subwoofer’s Left channel ”HIGH LEVEL IN”

terminal. Connect the Black “negative” (-) terminal of your ampli-

fier’s Left channel to the Black “negative” (-) of your subwoofer’s

Left channel ”HIGH LEVEL IN” terminal. Repeat this procedure for

the Right channel connections (refer to Figure 4). Take care that

no bare wires from any of the connections can touch any of the

other terminals as damage to your equipment could result.

CONTROLS

All of the subwoofer’s controls, and changes to control settings,

are accessed through the cursor key pad and display on the top

of the subwoofer’s cabinet. The only exception to this is the main

AC power switch which is located on the rear panel of the

subwoofer.

• Use the (UP) or (Down) key to scroll through the list of

control options.

• Use the (Left) or (Right) Key to make adjustments to a

given control setting

• Use (IE Center Key) when the “ ” appears on the display

to store and recall custom settings or to lock the keypad

• After adjusting the individual control parameters for “Volume”,

“EQ Mode”, “Low-pass filter” and “Phase”, your settings can

be stored in one of three user memories (“Movie”, “Music”

and “Night”). This allows for global recall of all of the above

settings to tailor the subwoofer’s performance to compensate

for differing source material and uses.

• The display will return to the “Volume” screen after 10

seconds if no adjustments are made while in any other control

or display mode.

• In periods of low humidity, it is possible that a static electricity

discharge to the subwoofer may cause a momentary

interruption in the subwoofers output or changes to the LCD

display content. Any display content errors will be corrected

when the screen changes modes.

“Volume” - Use the Left/Right cursor keys to adjust the

subwoofer’s volume level to match the output of your main

speakers. The volume control on your system’s main amplifier

or pre-amplifier will be the overall volume control for your

subwoofer and full range speakers. Press and hold (or press and

release) the Left cursor key to decrease the subwoofer’s volume.

Press and hold (or press and release) the Right cursor key to

increase the subwoofer’s volume to the desired level. From

this screen press the down cursor key to access other control

settings.

“Recall Settings:” - This screen is used to select any one of

three, user defined, memory presets titled “Movie”, “Music” and

“Night”. Use the Left/Right cursor keys to select the desired

group of stored control settings and press the Center key to

apply them. “Settings Recalled!” will then be displayed. All of the

user settings, in the three memory presets, can be erased and

restored to their default values by scrolling down to the last

“System Info” screen. Press the Right cursor key twice to get to

the “System Reset” screen. Press the center cursor key and all

user settings will be replaced with the default settings. “Reset

Complete” will be displayed. During initial setup, skip this screen

until all other initial control adjustments have been made. From

this screen press the down or up cursor key to access other

control settings.

“EQ Mode:” - This screen is used to select two different Bass

emphasis settings, titled “Punch” and “Depth”. They are designed

to complement different types of program material, such as

movie soundtracks or music. The “Punch” setting emphasizes the

60Hz region while the “Depth” setting boosts the 30Hz range. A

third setting is titled “Flat” which defeats these two settings. Use

of either of these EQ settings will slightly reduce the subwoofer’s

maximum output capability as they will require more of the

subwoofer’s amplifier power. Use the Left/Right cursor keys to

select the desired EQ setting. From this screen press the down

or up cursor key to access other control settings.

“Lowpass” - This screen is used to adjust the subwoofer’s

upper frequency limit to achieve a proper blend with your

system’s main speakers. A higher frequency (Hz) is typically used

with smaller, bass limited main speakers and a lower frequency

setting is customarily used with larger floorstanding models. This

filter can be adjusted from 40Hz to 120Hz, as required, or

defeated if the low pass filter function is being performed by your

system’s electronics. Use the Left/Right cursor keys to adjust the

lowpass filter. To defeat this filter press and hold the Right cursor

key until “Lowpass OFF LFE Mode” is displayed. Refer to your

surround processor’s owner’s manual for more Bass

Product specificaties

Merk:	Klipsch
Categorie:	Subwoofer
Model:	RW-10D

Heb je hulp nodig?

Als je hulp nodig hebt met Klipsch RW-10D stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Subwoofer Klipsch

Klipsch Reference RW-5802 II Handleiding

8 December 2024

Klipsch RSW-10 Handleiding

15 November 2024

Klipsch KI-215-SMA-II Handleiding

13 November 2024

Klipsch KI-115-SMA-II Handleiding

13 November 2024

Klipsch Reference Premiere RP-1200SW Handleiding

3 April 2024

Klipsch Reference Premiere RP-1000SW Handleiding

3 April 2024

Klipsch PRO-1000SW Handleiding

27 Maart 2024

Klipsch R-120SWi Handleiding

27 Augustus 2023

Klipsch LF-10 Handleiding

12 Juni 2023

Klipsch KD-10SW Handleiding

14 Mei 2023

Handleiding Subwoofer

Nieuwste handleidingen voor Subwoofer

Pioneer TS-A25S4 Handleiding

13 December 2024

Pioneer TS-A30S4 Handleiding

13 December 2024

Pioneer TS-A120S4E Handleiding

13 December 2024

JBL Power P1022 Handleiding

12 December 2024

JBL Power P1222 Handleiding

12 December 2024

ButtKicker BK-LFE Handleiding

10 December 2024

Infinity TSS-SUB750 Handleiding

9 December 2024

Infinity TSS-SUB4000 Handleiding

9 December 2024

Infinity Reference SUB R12 Handleiding

9 December 2024

AudioSource PSW110 Handleiding

9 December 2024