KitchenAid KMHC319LSS Handleiding

KitchenAid Magnetron KMHC319LSS

Lees hieronder de 📖 handleiding in het Nederlandse voor KitchenAid KMHC319LSS (16 pagina's) in de categorie Magnetron. Deze handleiding was nuttig voor 24 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/16

MICROWAVE HOOD COMBINATION

INSTALLATION INSTRUCTIONS

This product is suitable for use above electric or gas cooking products up to and including 36" (91.4 cm) wide. See the “Installation

Requirements” section for further notes.

These installation instructions cover different models. The appearance of your particular model may differ slightly from the illustration

in these installation instructions.

Table of Contents

MICROWAVE HOOD COMBINATION SAFETY

W11496338A

MICROWAVE HOOD COMBINATION SAFETY ............................1

INSTALLATION REQUIREMENTS .................................................2

Tools and Parts ............................................................................2

Separate cardboard template ......................................................2

Location Requirements ................................................................2

Product Dimensions .....................................................................3

Electrical Requirements ...............................................................3

INSTALLATION INSTRUCTIONS ...................................................4

Remove Mounting Plate ...............................................................4

Rotate Blower Motor ....................................................................4

Locate Wall Stud(s) ......................................................................7

Mark Rear Wall .............................................................................7

Drill Holes in Rear Wall .................................................................8

Attach Mounting Plate to Wall .....................................................8

Prepare Upper Cabinet ................................................................9

Install Damper Assembly

(for wall venting only) ..................................................................10

Install the Microwave Oven ........................................................10

Complete Installation .................................................................11

VENTING DESIGN SPECIFICATIONS ........................................12

ASSISTANCE ................................................................................14

Replacement Parts .....................................................................14

Accessories ................................................................................14

INSTALLATION REQUIREMENTS

Tools and Parts

Tools Needed

Gather the required tools and parts before starting installation.

Read and follow the instructions provided with any tools listed

here.

■Measuring tape

■Pencil

■Masking tape or

thumbtacks

■Scissors

■No. 2 Phillips screwdriver

■No. 3 Phillips screwdriver

for 1/4-20 x 3" (7.6 cm)

bolts

■Drill

■3/16" (5 mm), 3/8" (1 cm),

5/8" (1.6 cm) drill bits

■3/4" (1.9 cm) hole saw

■Diagonal wire cutting pliers

■Stud  nder

■7/16" (1.1 cm) socket

wrench (or box wrench) for

1/4" x 2" (6.4 mm x 5.1cm)

lag screws

■11/2" (3.8 cm) diameter hole

drill bit for wood or metal

cabinet

■Keyhole saw

■Caulking gun and

weatherproof caulking

compound

■Duct tape

Parts Needed

For information on reordering, see the “Replacement Parts”

section.

NOTE: The hardware items listed here are for wood studs.

For other types of wall structures, be sure to use appropriate

fasteners.

NOTE: Depending on model, aluminum grease  lter and

charcoal  lter may be combined.

Materials Needed

■Standard  ttings for wall or roof venting. See the “Venting

Design Speci cations” section.

Separate cardboard template

The wall template and upper cabinet template is embedded in

the backside of the carton box. They are used as a rear wall

template and upper cabinet template.

1. Cut along the dotted line to separate the cardboard template

from the backside of the carton box.

2. Set the cardboard template to the side and refer to it during

the “Mark Rear Wall” and “Prepare Upper Cabinet” parts of

installation.

Location Requirements

Check the opening where the microwave oven will be installed.

The location must provide:

■Minimum installation dimensions. See the “Installation

Dimensions” illustration.

■Minimum one 2" x 4" (5.1 x 10.2 cm) wood wall stud and

minimum 3/8" (1 cm) thickness drywall or plaster/lath within

cabinet opening.

■Support for weight of 150 lbs (68 kg) which includes

microwave oven and items placed inside the microwave

oven and upper cabinet.

■Grounded electrical outlet inside upper cabinet. See the

“Electrical Requirements” section.

NOTES:

■If installing the microwave oven near a left sidewall, make

sure there is at least 6" (15.2 cm) of clearance between the

wall and the microwave oven so that the door can open fully.

■Some models have a pocket handle. If installing the

microwave near a right side wall, make sure there is at least

3" (7.6 cm) of clearance between wall and microwave oven

so you can grab the handle integrated inside the door.

■Some cabinet and building materials are not designed to

withstand the heat produced by the microwave oven for

cooking. Check with your builder or cabinet supplier to make

sure that the materials used will not discolor, delaminate, or

sustain other damages.

Special Requirements

For Wall Venting Installation Only:

■Cutout must be free of any obstructions so that the vent  t

properly and the damper blade opens freely and fully.

A B C D E F G

A. 3/16-24 x 3" round-head

bolts (2)

B. 1/4-20 x 3"  at-head bolts (2)

C. Washers (2)

D. 3/16" toggle nuts (2)

E. 1/4" x 2" lag screws (2)

F. #6 x 3/8" Sheet metal screws (2)

G. Power supply cord bushing (1)

H. Damper assembly (for wall or

roof venting)

Not Shown:

■Mounting plate (attached to

back of microwave oven)

■Cardboard template (part of

packaging)

■Aluminum grease  lters

■Charcoal  lters (Depending

on model, charcoal  lters may

not be included. See “User

Instructions.”)

A. Backside of the carton box

B. Cardboard template (including Rear Wall template and Upper

Cabinet template)

For Roof Venting Installation Only:

■If you are using a rectangular-to-round transition piece, the

3" (7.6 cm) clearance needs to exist above the microwave

oven so that the damper blade can open freely and fully.

See “Rectangular to Round Transition” illustration in the

“Venting Design Speci cations” section.

Installation Dimensions

NOTE: The grounded 3 prong outlet must be inside the upper

cabinet. See the “Electrical Requirements” section.

*30" (76.2 cm) is typical for 66" (167.6 cm) installation height.

Exact dimensions may vary depending on type of range/cooktop

below.

NOTE: To ensure good performance, do not obstruct top vent

air ow. If cabinets are deeper than 14" (35.6 cm) but no more

than 15" (38.1 cm), use the bump out mounting kit replacing the

I bar mounting plate from the wall. The bump out mounting kit

(part # W11185746) is not provided but can be purchased from

Whirlpool.

Product Dimensions

*Overall depth of product will vary slightly depending on door

design.

Electrical Requirements

Observe all governing codes and ordinances.

Required:

■A 120 V, 60 Hz, AC only, 15 or 20 A electrical supply with a

fuse or circuit breaker

Recommended:

■A time-delay fuse or time-delay circuit breaker

■A separate circuit serving only this microwave oven

A. 2" x 4" (5.1 x 10.2 cm) wall stud

B. Grounded 3 prong outlet

12" (30.5 cm) minimum

14" (35.6 cm) maximum

30"

(76.2 cm)

minimum

A B

upper cabinet and

side cabinet depth

30"

(76.2 cm)

typical*

66" (167.6 cm) minimum

I bar mounting plate Bump out mounting bracket

12" DEEPER 14" 14" DEEPER 15" GROUNDING INSTRUCTIONS

SAVE THESE INSTRUCTIONS

For all cord connected appliances:

The microwave oven must be grounded. In the event of

an electrical short circuit, grounding reduces the risk of

electric shock by providing an escape wire for the electric

current. The microwave oven is equipped with a cord

having a grounding wire with a grounding plug. The plug

must be plugged into an outlet that is properly installed

and grounded.

WARNING: Improper use of the grounding plug can

result in a risk of electric shock. Consult a qualified

electrician or serviceman if the grounding instructions are

not completely understood, or if doubt exists as to whether

the microwave oven is properly grounded.

Do not use an extension cord. If the power supply cord is

too short, have a qualified electrician or serviceman install

an outlet near the microwave oven.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

WARNING

16¹⁄₄"

(41.3 cm)

17¹⁄₈"

(43.5 cm)

+/-

3/16

(0.5 cm)

17"

Up to

(43.2 cm)*

cm)

29⁷⁄₈" (76.0

Product specificaties

Merk:	KitchenAid
Categorie:	Magnetron
Model:	KMHC319LSS

Heb je hulp nodig?

Als je hulp nodig hebt met KitchenAid KMHC319LSS stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Magnetron KitchenAid

KitchenAid KMCS122RSS Handleiding

24 September 2024

KitchenAid KMCS122RBS Handleiding

20 Augustus 2024

KitchenAid KMHC319LWH Handleiding

13 Juli 2023

KitchenAid KHMS2050SBT0 Handleiding

19 Juni 2023

KitchenAid KCMS1555RSS2 Handleiding

17 Juni 2023

KitchenAid KEHU309SSS03 Handleiding

17 Juni 2023

KitchenAid YKEMC308KM0 Handleiding

17 Juni 2023

KitchenAid KHMS175MWH0 Handleiding

15 Juni 2023

KitchenAid Architect KHMS2040BWH Handleiding

7 Juni 2023

KitchenAid KMQCXB 45600 Handleiding

6 Juni 2023

Handleiding Magnetron

Nieuwste handleidingen voor Magnetron

Panasonic NN-K5441 JF Handleiding

23 November 2024

Panasonic NN-GT556W Handleiding

23 November 2024

Panasonic NN-GF339M Handleiding

23 November 2024

Panasonic NN-K5442 MF Handleiding

23 November 2024

Panasonic NN-GF381M Handleiding

23 November 2024

Panasonic NN-GF557M Handleiding

23 November 2024

Panasonic NN-SM321H Handleiding

23 November 2024

Panasonic NN-S553 MF Handleiding

23 November 2024

Panasonic NN-ST651 Handleiding

23 November 2024

Panasonic NN-K5440 MF Handleiding

23 November 2024