KitchenAid KHMC1857WSS Handleiding

KitchenAid Magnetron KHMC1857WSS

Lees hieronder de 📖 handleiding in het Nederlandse voor KitchenAid KHMC1857WSS (12 pagina's) in de categorie Magnetron. Deze handleiding was nuttig voor 10 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/12

MICROWAVE HOOD COMBINATION

INSTALLATION INSTRUCTIONS

MICROWAVE HOOD COMBINATION SAFETY

This product is suitable for use above electric or gas cooking products up to and including 36" (91.4 cm) wide. See “Installation

Requirements” section for further notes.

These installation instructions cover different models. The appearance of your particular model may differ slightly from the illustration in

these installation instructions.

Table of Contents

MICROWAVE HOOD COMBINATION SAFETY ..............................1

INSTALLATION REQUIREMENTS ...................................................2

Tools and Parts...............................................................................2

Remove Cardboard Template ........................................................2

Location Requirements...................................................................2

Product Dimensions .......................................................................3

Electrical Requirements..................................................................3

INSTALLATION INSTRUCTIONS .....................................................4

Remove Mounting Plate .................................................................4

Rotate Blower Motor.......................................................................4

Locate Wall Stud(s).........................................................................6

Mark Rear Wall................................................................................7

Drill Holes in Rear Wall....................................................................7

Attach Mounting Plate to Wall........................................................8

Prepare Upper Cabinet...................................................................8

Install Damper Assembly ................................................................9

Install the Microwave Oven ............................................................9

Complete Installation ....................................................................10

VENTING DESIGN SPECIFICATIONS............................................11

ASSISTANCE ...................................................................................12

Replacement Parts .......................................................................12

Accessories...................................................................................12

W10247296B

You can be killed or seriously injured if you don't immediately

You can be killed or seriously injured if you don't follow

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can

happen if the instructions are not followed.

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety

messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”

These words mean:

follow instructions.

instructions.

DANGER

WARNING

INSTALLATION REQUIREMENTS

Tools and Parts

Tools Needed

Gather the required tools and parts before starting installation.

Read and follow the instructions provided with any tools

listed here.

Parts Supplied

For reorder information, see “Replacement Parts” section.

NOTE: The hardware items listed here are for wood studs. For

other types of wall structures, be sure to use appropriate

fasteners.

NOTE: Depending on model, aluminum grease filter and charcoal

filter may be combined.

Materials needed

■ Standard fittings for wall or roof venting. See “Venting Design

Specifications” section.

Remove Cardboard Template

The cardboard piece from the top of the microwave oven

packaging is perforated. The piece inside the perforation is for use

as a rear wall template.

1. Cut along the perforation to separate the template from the

rest of the cardboard packaging.

2. Set the cardboard template to the side and refer to it during

the “Mark Rear Wall” part of installation.

Location Requirements

Check the opening where the microwave oven will be installed.

The location must provide:

■ Minimum installation dimensions. See “Installation

Dimensions” illustration.

■ Minimum one 2" x 4" (50.8 x 101.6 mm) wood wall stud and

minimum 3/8" (10 mm) thickness drywall or plaster/lath within

cabinet opening.

■ Support for weight of 150 lbs (68 kg), which includes

microwave oven and items placed inside the microwave oven

and upper cabinet.

■ Grounded electrical outlet inside upper cabinet. See

“Electrical Requirements” section.

NOTES:

■

If installing the microwave oven

near a left sidewall, make sure

there is at least 6" (15.2 cm) of clearance between the wall and

the microwave oven, so that the door can open fully.

■ Some cabinet and building materials are not designed to

withstand the heat produced by the microwave oven for

cooking. Check with your builder or cabinet supplier to make

sure that the materials used will not discolor, delaminate or

sustain other damages.

Special Requirements

For Wall Venting Installation Only:

■ Cutout must be free of any obstructions so that the vent fits

properly, and the damper blade opens freely and fully.

For Roof Venting Installation Only:

■ If you are using a rectangular to round transition piece, the

3" (7.6 cm) clearance needs to exist above the microwave

oven so that the damper blade can open freely and fully. See

“Rectangular to Round Transition” illustration in “Venting

Design Specifications” section.

■ Measuring tape

■ Pencil

■ Masking tape or thumbtacks

■ Scissors

■ No. 2 Phillips screwdriver

■ No. 3 Phillips screwdriver for

1/4-20 x 3" bolts

■ Drill

■ 3/16" (5 mm), 3/8" (10 mm)

drill bits

■ 3/4" (19 mm) hole saw

■ Stud finder

■ 7/16" socket wrench

(or box wrench) for 1/4" x 2"

lag screws

■ 1½" (3.8 cm) diam. hole drill

bit for wood or metal

cabinet

■ Keyhole saw

■ Caulking gun and

weatherproof caulking

compound

■ Duct tape

A. 1/4-20 x 3" round-head bolts (2)

B. 1/4-20 x 3" flat-head bolts (2)

C. Washers (2)

D. Toggle nuts (2)

E. 1/4" x 2" lag screws (2)

F. Sheet metal screws (2)

G. Power supply cord bushing (1)

H. Damper assembly (for wall or roof

venting)

Not Shown:

Upper cabinet template

Mounting plate (attached to

back of microwave oven)

Cardboard template (part of

packaging)

Aluminum grease filters

Charcoal filters (Depending

on model, charcoal filters

may not be included. See

User Instructions.)

A B C D E F G

Installation Dimensions

NOTE: The grounded 3 prong outlet must be inside the upper

cabinet. See “Electrical Requirements” section.

*30" (76.2 cm) is typical for 66" (167.6 cm) installation height.

Exact dimensions may vary depending on type of range/cooktop

below.

Product Dimensions

Electrical Requirements

Observe all governing codes and ordinances.

Required:

■ A 120 Volt, 60 Hz, AC only, 15- or 20-amp electrical supply

with a fuse or circuit breaker.

Recommended:

■ A time-delay fuse or time-delay circuit breaker.

■ A separate circuit serving only this microwave oven.

A. 2" x 4" wall stud

B. Grounded 3 prong outlet

12" (30.5 cm) min.

14" (35.6 cm) max.

30"

(76.2 cm)

min.

A B

upper cabinet and

side cabinet depth

30"

(76.2 cm)

typical*

66" (167.6 cm) min.

29⁷⁄₈" (76.0 cm)

³⁄₄

(40.0 cm)

17¹⁄₄"

(43.8 cm)

16¹⁄₄"

(41.3 cm)

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

WARNING

GROUNDING INSTRUCTIONS

SAVE THESE INSTRUCTIONS

■ For all cord connected appliances:

The microwave oven must be grounded. In the event of

an electrical short circuit, grounding reduces the risk of

electric shock by providing an escape wire for the electric

current. The microwave oven is equipped with a cord

having a grounding wire with a grounding plug. The plug

must be plugged into an outlet that is properly installed

and grounded.

WARNING: Improper use of the grounding plug can

result in a risk of electric shock. Consult a qualified

electrician or serviceman if the grounding instructions are

not completely understood, or if doubt exists as to whether

the microwave oven is properly grounded.

Do not use an extension cord. If the power supply cord is

too short, have a qualified electrician or serviceman install

an outlet near the microwave oven.

Product specificaties

Merk:	KitchenAid
Categorie:	Magnetron
Model:	KHMC1857WSS
Apparaatplaatsing:	Boven het fornuis
Inhoud (binnenkant):	50 l
Soort bediening:	Touch
Magnetronvermogen:	1000 W
Kleur van het product:	Zilver
Deurscharnieren:	Links
Draaitafel:	Ja
Afmeting draaiplateau:	305 mm
Ingebouwd display:	Ja
Timer:	Ja
Breedte:	759 mm
Diepte:	406 mm
Hoogte:	438 mm
Netbelasting:	- W
Opwarmfunctie:	Ja
Grill:	Nee
Uitgestelde start timer:	Ja
Deur open mechanisme:	Duwen
Verlichting binnenin:	Ja
Geïntegreerde klok:	Ja
Soort klok:	Elektronisch
Convectie koken:	Ja
Stoom koken:	Nee
Rotisserie:	Nee
Ontdooifunctie:	Ja
Gebruikershandleiding:	Ja
Soort vetfilter:	Houtskool
Convectie kracht:	1600 W
Aantal ventilatiesnelheden:	4
Klok functie:	Ja
Kookplaatverlichting:	Ja
Type product:	Combinatiemagnetron
Type beeldscherm:	LED
Ventilator performance:	300 cfm