KitchenAid KFDC558JSS Handleiding

KitchenAid Fornuis KFDC558JSS

Lees hieronder de 📖 handleiding in het Nederlandse voor KitchenAid KFDC558JSS (4 pagina's) in de categorie Fornuis. Deze handleiding was nuttig voor 29 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/4
KFDC506J shown on right
(reference Use & Care Guide for 30” and 48” diagrams)
FUNCTION USE & LIGHT BEHAVIOR
Oven Start
Button
Solid White Light
The Start Button will illuminate solid white when the most recent command was sent from the app and the appliance is
being controlled remotely. The light will turn off as soon as an action is taken on the appliance.
Pulsing White Light
The Start Button will ash white to prompt the user to press start after the Mode and Temperature have been selected.
If no action is taken after 2 minutes, a tone will sound and the unit will timeout and return to idle.
To exit idle, re-select a Mode and Temperature before pressing the Start Button.
Quick-Blinking White Light
If an invalid knob combination has been chosen and the Start Button is pressed, the Indicator Light will quickly blink and
a tone will sound to indicate that the chosen combination is invalid. See the Mode and Temperature Compatibility Table
for valid combinations.
Mode and
Temperature
Indicator Light
Solid LightWhite
When a Mode or Temperature is selected, and the combination is valid, the Mode and Temperature Indicator Light
will illuminate white.
Solid LightRed
After a valid Mode and Temperature have been selected and the Start Button has been pressed, the Indicator Light
will turn red until the preheat is completed.
Solid LightWhite
The light will turn solid white and a tone will sound when the preheat is complete. If there is no preheat for a cycle,
the preheat completes immediately and the light turns solid white.
Quick-Blinking LightWhite
If an invalid knob combination has been selected, the light will blink and a tone will sound prompting the user to select
a valid combination. The Indicator Light will continue to blink and a tone will sound every 30 seconds until the error is
xed or the unit will timeout after 2 minutes of inactivity and return to idle.
Pulsing LightAmber
The Indicator Light will pulse amber if the oven is undergoing a 100+ degree decrease in temperature
(i.e. changing from Bake 450℉ to Bake 350℉) or if the oven is too hot to properly proof and needs to cool down.
WIFI Indicator
Light
Solid LightWhite
The WIFI Indicator Light illuminates white when the unit is WIFI enabled allowing the user to monitor
the unit. All lights will turn off in idle even when the unit is connected to WIFI.
Remote Enabled
Indicator Light
Solid LightWhite
The Remote Indicator Light illuminates white when the unit is remote enabled and the user can send instructions
to the unit. All lights will turn off in idle even when the unit is remote enabled.
Griddle Power
Indicator Light*
Solid LightBlue
The Griddle Power Indicator Light illuminates blue when the griddle is powered on.
Griddle
Preheat Light*
Blinking LightBlue
The Griddle Preheat Light ashes blue while the griddle is preheating.
Solid LightBlue
Once the preheat temperature has been reached, the Indicator Light turns solid blue.
LIGHT INDICATORS AND BEHAVIORS
WIFI Antenna Module
Oven Light Button
Mode and Temperature Knob and Indicator Light
Oven Start Button and Indicator Light
WIFI Indicator Light
Remote Enabled Indicator Light
SAID Label
COMMERCIAL-STYLE DUAL FUEL RANGE
QUICK REFERENCE GUIDE
*on 48” models only
W11114332A
WIFI CONNECTIVITY
WIFI Connectivity and Remote Operation
Models are provided with a WIFI Antenna Module that allows the unit
to be remotely operated. The control is capable of monitoring and
performing remote operations once the remote enabling function
sequence is properly initiated at the appliance.
To connect your appliance:
1. Download the KitchenAidℱ App from the Google Play¼ or
Apple App Store and create an account.
2. Locate the SAID Label using the diagram on the front of this Guide.
3. Set both the Mode and Temperature Knob to the WIFI mode.
4. Once the knobs are in position, press the pulsing Start Button.
5. When the WIFI Indicator Light to the left of the knob starts
blinking white, follow the steps in the app.
6. When the connection is complete the WIFI Indicator Light
will turn solid white.
7. To enable remote operations, turn on “Remote Control” in the app.
The Remote Indicator Light will turn solid white to signify remote
control commands can be sent to the range.
For more information on WIFI Connectivity,
visit www.kitchenaid.com/connect.
Âź/ℱ ©2019 KitchenAid. All rights reserved. All other trademarks are owned by their respective companies. D190462KCA
MODE KNOB TEMPERATURE KNOB
Bake Proof
Warm
Temperatures (225-500°F)
Broil Broil High
Broil Low
Convect Bake Temperatures (225-500°F)
Convect Roast Temperatures (225-500°F)
Convect Broil Broil High
Broil Low
Clean Clean
WIFI WIFI*
*See WIFI Connectivity Section
MODE AND TEMPERATURE
COMPATIBILITY TABLE
NOTE: When the unit is on, Mode can be changed
between Bake, Convect Bake, Convect Roast, and
Broil/Convect Broil. Press the Start Button to
conrm Mode change.
ACTION EXAMPLE
Invalid Mode/
Temperature
Combination Made
During a Cycle*
*Mode and Temperature
Compatibility Table
If the Temperature is changed during a cycle to
a selection that is invalid and the unit was in
a previous cycle, the unit will remain in the
previous cycle until corrected.
The Mode and Temperature Indicator Light
will blink to show an invalid selection has been
made and will continue to blink until corrected.
Mode is in Bake, Temperature is at 350°F
(177°C), Start Button is pressed and cycle
is running. Then Mode is moved to
Broil High. Unit will continue to Bake
at 350°F (177°C).
Changing Mode
Selection During
a Cycle
If the Mode is changed during a cycle
to a selection that is valid, the Start Button
will blink to indicate prompt for action. Press
the Start Button to begin new Mode selection.
If the Mode is moved from Bake to
Convect Bake, the Start Button will blink
as a prompt for action.
Changing Temperature
Selection During
a Cycle
If the Mode is changed during a cycle to
a selection that is valid, the Temperature
will automatically change.
If the Temperature during a Bake cycle
is moved from 350°F to 450°F (177°C to
232°C) the unit will Bake at 450°F (232°C).
CHANGING MODE/TEMPERATURE DURING A CYCLE
*Appliance must be set to Remote Enable. Features subject to change. Compatible connected appliance required.
Details and privacy info at www.kitchenaid.com/connect.
W11114332A
KFDC506J présentée à droite
(consulter le guide d’utilisation et d’entretien pour les illustrations des modùles de 30 po et 48 po)
FONCTION UTILISATION ET COMPORTEMENT DES TÉMOINS
Bouton Start
(mise en marche)
du four
LumiĂšre continueblanche
Le bouton Start (mise en marche) s’illumine en blanc lorsque la plus rĂ©cente commande a Ă©tĂ© envoyĂ©e Ă  partir de
l’application et que l’appareil est commandĂ© Ă  distance. La lumiĂšre s’éteint dĂšs qu’une action est prise dans l’application.
LumiĂšre qui clignoteblanche
Le bouton Start (mise en marche) clignotera en blanc pour indiquer à l’utilisateur qu’il doit appuyer sur le bouton Start
(mise en marche) aprĂšs que le mode et la tempĂ©rature ont Ă©tĂ© sĂ©lectionnĂ©s. Si aucune action n’est effectuĂ©e aprĂšs
2 minutes, une tonalitĂ© rĂ©sonnera et l’appareil se mettra en veille. Pour quitter l’état de veille, sĂ©lectionner Ă  nouveau
un mode et une tempĂ©rature avant d’appuyer sur le bouton Start (mise en marche).
LumiĂšre qui clignote rapidementblanche
Si une combinaison invalide de boutons est sĂ©lectionnĂ©e et qu’on appuie sur le bouton Start (mise en marche), le tĂ©moin
lumineux clignotera rapidement et une tonalité se fera entendre pour indiquer que la combinaison est invalide.
Consulter le tableau de compatibilité des modes et températures pour connaßtre les bonnes combinaisons.
TĂ©moin lumineux
de mode et de
température
LumiĂšre continueblanche
Lorsqu’un mode ou une tempĂ©rature est sĂ©lectionnĂ© et que la combinaison est valide, le tĂ©moin lumineux de mode et
de tempĂ©rature s’allumera en blanc.
LumiĂšre rouge continue
AprÚs avoir sélectionné un mode et une température valides, et avoir appuyé sur le bouton Start (mise en marche),
le tĂ©moin lumineux deviendra rouge jusqu’à ce que le prĂ©chauffage soit terminĂ©.
LumiĂšre continueblanche
Le tĂ©moin s’allumera en blanc continu et une tonalitĂ© rĂ©sonnera une fois le prĂ©chauffage terminĂ©. S’il n’y a pas de
prĂ©chauffage pendant un programme, le prĂ©chauffage se termine immĂ©diatement et le tĂ©moin s’allume en blanc continu.
LumiĂšre qui clignote rapidementblanche
Si une combinaison invalide de boutons a été sélectionnée, le témoin clignotera et une tonalité résonnera pour demander
Ă  l’utilisateur de choisir une combinaison valide. Le tĂ©moin lumineux continuera Ă  clignoter et une tonalitĂ© retentira
toutes les 30 secondes jusqu’à ce que l’erreur soit rĂ©solue ou l’appareil deviendra inactif aprĂšs une durĂ©e de 2 minutes
et retournera en veille.
LumiĂšre ambre qui clignote
Le témoin lumineux clignotera ambre si le four perd plus de 100 degrés (p. ex., passage de la cuisson au four à 450 °F
à la cuisson au four à 350 °F) ou si le four est trop chaud pour correctement faire lever la pùte et doit refroidir.
TĂ©moin lumineux
Wi-Fi
LumiĂšre continueblanche
Le tĂ©moin lumineux Wi-Fi s’illumine en blanc lorsque l’appareil est connectĂ© au rĂ©seau Wi-Fi, ce qui permet Ă  l’utilisateur
de gĂ©rer l’appareil. Tous les tĂ©moins s’éteignent lorsque l’appareil est en veille et qu’il est connectĂ© au rĂ©seau Wi-Fi.
TĂ©moin lumineux
d’utilisation à
distance activé
LumiĂšre continueblanche
Le tĂ©moin lumineux d’utilisation Ă  distance s’illumine en blanc lorsque l’appareil peut ĂȘtre commandĂ© Ă  distance, ce qui
permet Ă  l’utilisateur d’envoyer des commandes Ă  l’appareil. Tous les tĂ©moins s’éteignent lorsque l’appareil est en veille
et qu’il est en mode d’utilisation à distance.
TĂ©moin lumineux
d’alimentation de
la plaque Ă  frire*
LumiĂšre continuebleue
Le tĂ©moin lumineux d’alimentation de la plaque Ă  frire s’illumine en bleu lorsque la grille est alimentĂ©e.
TĂ©moin de
préchauffage de
la plaque Ă  frire*
LumiĂšre qui clignotebleue
Le témoin lumineux de préchauffage de la plaque à frire clignote en bleu lors du préchauffage de la plaque à frire.
LumiĂšre continuebleue
Une fois la tempĂ©rature de prĂ©chauffage atteinte, le tĂ©moin lumineux s’allume en bleu continu.
TÉMOINS LUMINEUX ET COMPORTEMENTS
Module d’antenne Wi-Fi
Bouton de lumiĂšre du four
Témoin et bouton de température et de mode
Bouton Start (mise en marche) du four et témoin lumineux
TĂ©moin lumineux Wi-Fi
TĂ©moin lumineux d’utilisation Ă  distance activĂ©
Étiquette SAID
CUISINIÈRE À DOUBLE COMBUSTIBLE
DESTYLECOMMERCIAL
GUIDE DE RÉFÉRENCE RAPIDE
*Sur les modĂšles de 48 po seulement
W11114332A

Product specificaties

Merk: KitchenAid
Categorie: Fornuis
Model: KFDC558JSS

Heb je hulp nodig?

Als je hulp nodig hebt met KitchenAid KFDC558JSS stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Fornuis KitchenAid

KitchenAid

KitchenAid KFDC500JAV Handleiding

16 Juni 2023
KitchenAid

KitchenAid KFGS530ESS Handleiding

3 Juni 2023
KitchenAid

KitchenAid KFDC558JSC Handleiding

26 Mei 2023
KitchenAid

KitchenAid KGCC506RBL Handleiding

25 Mei 2023
KitchenAid

KitchenAid KFGC558JMB Handleiding

24 Mei 2023
KitchenAid

KitchenAid KFDC500JBK Handleiding

21 Mei 2023
KitchenAid

KitchenAid KSGG700EBS Handleiding

18 Mei 2023
KitchenAid

KitchenAid Architect KECC056RBL Handleiding

8 Mei 2023
KitchenAid

KitchenAid Architect KESK901SSS Handleiding

7 Mei 2023
KitchenAid

KitchenAid Architect KICU569XBL Handleiding

7 Mei 2023

Handleiding Fornuis

Nieuwste handleidingen voor Fornuis

Whirlpool

Whirlpool WLB3965BFIXL Handleiding

21 December 2024
Kaiser

Kaiser KCG 6335 RotEm Turbo Handleiding

20 December 2024
Kaiser

Kaiser KCT 7797 FI ElfEm Handleiding

20 December 2024
Kaiser

Kaiser KCG 9387 Turbo Handleiding

20 December 2024
Svan

Svan SKGW4601 Handleiding

20 December 2024
Svan

Svan SKMW4600X Handleiding

20 December 2024
Kaiser

Kaiser KG 9325 Em Turbo Handleiding

20 December 2024
Kaiser

Kaiser KCT 4795 FI AD Handleiding

20 December 2024
Kaiser

Kaiser KCT 6703 F Handleiding

20 December 2024
Svan

Svan SKM4500X Handleiding

20 December 2024