Kicker L7R124 Handleiding

Kicker Subwoofer L7R124

Lees hieronder de 📖 handleiding in het Nederlandse voor Kicker L7R124 (9 pagina's) in de categorie Subwoofer. Deze handleiding was nuttig voor 54 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/9
L7R10 | L7R12 | L7R15
Manual del Propietario | Español
ALTAVOZ PARA SONIDOS GRAVES
Benutzerhandbuch | Deutsch
TIEFTÖNER
Manuel d’utilisation | Française
HAUT-PARLEUR D’EXTRÊMES GRAVES
L7R
SUBWOOFERS
Owner’s Manual
2
SPECIFICATIONS
WIRING
L7R subwoofers are available with dual 2(ohm) or dual 4voice coils. Both coils must be connected to
a source of amplifi cation. The dual 2 woofer will generate a 1 load if the coils are wired in parallel or a
4 load in series. The dual 4woofer will provide a 2load wired in parallel or 8 load wired in series.
The terminals with the white dots are for the fi rst voice coil. The terminals with solid-red and solid-black
markings are for the second voice coil. See Figure 1.
L7R SUBWOOFER
OWNER’S MANUAL
Authorized KICKER Dealer:
Purchase Date:
Speaker Model Number:
Speaker Serial Number:
Model L7R10 L7R12 L7R15
Rated Impedance [Ω] 2 or 4 2 or 4 2 or 4
Fs [Hz] 33.6 30.1 22.5
Continuous Power Handling [Watts RMS] 500 600 900
Sensitivity [1W, 1m] 85.9 86.7 88.05
Xmax (Linear Excursion) [mm] 13.9 13.9 16.4
Re [Ω] 6.79 7.52 7.43
Qms 10.046 10.292 9.846
Qes 0.559 0.666 0.598
Qts 0.53 0.625 .564
Vas [ft³, L] 1.09, 30.87 2.37, 67.4 6.875, 194.7
Outer Frame Dimension [in, cm] 10 11/16, 27.2 12 9/16, 32 15 5/8, 39.6
Mounting Cutout [in, cm] 9 5/16, 23.7 11 1/16, 28.1 13 3/4, 34.9
Mounting Depth [in, cm] 6 1/8, 15.7 6 7/8, 17.4 8 3/8, 21.5
Frequency Response [Hz] 25–100 25–100 20–100
L7R10 / L7R12 / L7R15Models:
Note: All specifi cations and performance fi gures are subject to change. Please visit www.kicker.com for the most
current information. To get the best performance from your new KICKER Subwoofer, we recommend using genuine KICKER
Accessories and Wiring. Please allow two weeks of break-in time for the subwoofer to reach optimum performance.
WARNING: KICKER products are capable of producing sound levels that can permanently damage your hearing! Turning
up a system to a level that has audible distortion is more damaging to your ears than listening to an undistorted system at
the same volume level. The threshold of pain is always an indicator that the sound level is too loud and may permanently
damage your hearing. Please use common sense when controlling volume.
Sound Check: Poor bass response? Check the system phasing by reversing the positive and negative
speaker connections on the subwoofer. If the bass improves, then the subwoofer was out of phase in
reference to the rest of the audio system.
3
BOX BUILDING NOTES
Use 3/4” (1.9cm) or thicker MDF (medium density fi berboard) and seal the joints with silicone. Use the
“template” inside your L7R’s shipping carton to mark the mounting hole, then cut directly on the line.
These designs need internal bracing. Add triangular bracing between each of the larger unsupported
panels. See Figure 3.
All the cubic feet (L) measurements in this manual include the displacement of the woofer. For the vented
enclosures the displacement of the port must be calculated and added to the internal volume of the fi nal
design. Use the outer dimensions of the port and multiply “X x Y x Z”, convert to cubic feet, for example
the L7R12 vented Minimum design’s external port dimensions are, using 3/4” (1.9cm) MDF: [ (13.25” +
1.5” total MDF wall thickness) x (2.5” + 1.5” total MDF wall thickness) x 22.5”] x (1 ft3 / 1728 in3 ) = .77
ft3, and add this number to the internal volume of the enclosure, L7R12’s 1.75 ft3 + .77 ft3 = 2.52 ft3. See
Figure 4. Due to the necessary length of these ports, you may want to fold the port along the bottom and
back walls. It will be impractical to use round ports for these designs.
Figure 1 Series Wiring
Parallel Wiring
Figure 2
Cutout Dimensions
Dual 2Ω Voice Coils = 4Ω Load
Dual 4Ω Voice Coils = 8Ω Load
Dual 2Ω Voice Coils = 1Ω Load
Dual 4Ω Voice Coils = 2Ω Load
L7R10
L7R12
L7R15
13 3/4”
(34.9 cm)
11 1/16”
(28.1 cm)
9 5/16”
(23.7 cm)
13 3/4”
(34.9 cm)
11 1/16”
(28.1 cm)
9 5/16”
(23.7 cm)
Corner Radius:
L7R10 - 1-9/16” (3.9cm)
L7R12 - 1-13/16” (4.6cm)
L7R15 - 2” (5.1cm)
coil 1+
coil 2+
to amplifi er +
to amplifi er -
coil 2-
coil 1-
coil 1+
coil 2+
to amplifi er +
to amplifi er -
coil 2-
coil 1-

Product specificaties

Merk: Kicker
Categorie: Subwoofer
Model: L7R124

Heb je hulp nodig?

Als je hulp nodig hebt met Kicker L7R124 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Subwoofer Kicker

Kicker

Kicker 50CVX124 Handleiding

12 November 2024
Kicker

Kicker 50CVX154 Handleiding

12 November 2024
Kicker

Kicker 51CWQ102 Handleiding

23 September 2024
Kicker

Kicker 51CWQ122 Handleiding

23 September 2024
Kicker

Kicker 43C84 Handleiding

23 September 2024
Kicker

Kicker 51CWQ124 Handleiding

23 September 2024
Kicker

Kicker CompQ 51CWQ152 Handleiding

11 September 2024
Kicker

Kicker CompQ 51CWQ154 Handleiding

11 September 2024
Kicker

Kicker CompVT 43CVT122 Handleiding

27 Juni 2024
Kicker

Kicker CompVR 43CVR104 Handleiding

27 Juni 2024

Handleiding Subwoofer

Nieuwste handleidingen voor Subwoofer

Deaf Bonce

Deaf Bonce Apocalypse ASA-4000.1 Handleiding

20 November 2024
Deaf Bonce

Deaf Bonce Apocalypse Atom 2000 PRO Handleiding

20 November 2024
JBL

JBL PSW-D115 Handleiding

20 November 2024
JBL

JBL PSW-D110 Handleiding

20 November 2024
JBL

JBL PSW-D112 Handleiding

20 November 2024
JBL

JBL Power P1224 Handleiding

20 November 2024
JBL

JBL Power P1220D II Handleiding

20 November 2024
JBL

JBL Power P1242 Handleiding

20 November 2024
JBL

JBL Power P1220 II Handleiding

20 November 2024
JBL

JBL Power P1020 II Handleiding

20 November 2024