Kicker CompVT CVT10 Handleiding

Kicker Subwoofer CompVT CVT10

Lees hieronder de 📖 handleiding in het Nederlandse voor Kicker CompVT CVT10 (4 pagina's) in de categorie Subwoofer. Deze handleiding was nuttig voor 26 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

CVT

COMP SUBWOOFERVT

CVT CVT CVT8, 10, 12

CVT8

2 or 4

49.2

400 (200)

84.8

.226 (5.75)

2.15

10.641

.597

.565

.364 (10.32)

30.4 (497)

8 1/2 (21.6)

7 1/16 (17.9)

3 3/8 (8.6)

PERFORMANCE

Congratulations on your

KICKER purchase

Please record your purchase

information and keep your sales

receipt for validation of warranty.

INSTALLATION

COMPVTSUBWOOFER

Owner’sManual

CVT CVT CVT8 / 12 /10

Models:

COMPVTSUBWOOFER 3

Authorized Kicker Dealer:

Purchase Date:

Subwoofer Model Number:

Subwoofer Serial Number:

_________________________

SealedEnclosureApplications

The CompVT generates more sound pressure than competing subwoofers on the market and excels

when used in the recommended sealed boxes. These sealed enclosure designs give the smoothest

response with increased energy at the lowest frequencies, 20 to 30Hz. These designs deliver massive

amounts of highly-accurate bass and can be driven with punishing levels of amplifier power. The

CompVT high performance suspension system can operate in a larger sealed enclosure. This maximum

enclosure volume application is ideal for SQ (ultra sound quality) installations. The SQ enclosure

generates a very flat response curve and superbly extends the subbass response. CompVT subwoofers

perform well in any size sealed enclosure between the Compact and SQ volume recommendations.

These systems will exhibit benefits of both designs: Compact produces high-impact bass, and SQ

generates low bass frequency protraction. Overall, the system will sound more like the recommended

enclosure design it is closest to in enclosure volume. These enclosure recommendations have been

calculated with the airspace inside the enclosure and include the displacement of the woofer. All sealed-

enclosure airspace should be filled to 50% loose poly-fil (polyester fiberfill) stuffing. Do not make the

airspace greater than the SQ, maximum enclosure volume, recommendation.

Model:

Nominal Impedance [Zn], ohm

Resonance Frequency [fs], Hz

Power Handling Watts, Peak (RMS)

Sensitivity [SPLo], dB @ 1W, 1m

Effective Excursion [EXmax™], in (mm)

DC Resistance [Re], ohm

Mechanical Q-Factor [Qms]

Electrical Q-Factor [Qes]

Total Q-Factor [Qts]

Equivalent Volume [Vas], ft

3(L)

Net Displacement, in

3(cc)

Outer Frame Diameter, in (cm)

Hole Cut-Out Diameter, in (cm)

Mounting Depth, in (cm)

CVT12

2 or 4

32.3

800 (400)

87.1

.498 (12.64)

2.16

10.16

.546

.518

2.15 (61.0)

52.4 (860)

12 1/2 (31.8)

10 15/16 (27.8)

4 5/16 (10.9)

CVT10

2 or 4

32.7

800 (400)

87.2

.501 (12.73)

2.13

9.56

.461

.440

1.30 (37.14)

48.2 (790)

10 5/8 (27)

9 1/8 (23.2)

4 3/16 (10.7)

Performance

The Kicker CompVT subwoofers were specially designed for “Livin’ Loud” out in the harsh automotive

environment. CompVT subwoofers are versatile and surpass the competition in a sealed or vented box.

The ultra-thin mounting depth make the CompVT subwoofers ideal for custom installations and space-

limited applications. See Figure 1. They are made of advanced materials and construction techniques to

maintain optimal performance for years to come.

Please allow two weeks of break-in time for the subwoofer to reach optimum performance. To get the best performance

from your new Kicker subwoofers, we recommend using genuine Kicker Accessories and Wiring.

Note: All specifications and performance figures are subject to change. Measurements based on 2 ohm voice coil models.

Please visit the www.kicker.com for the most current information.

F uig re 1

Comp Sub oofw er

CompVT ub oofS w er

To make the most efficient use of space when building the compact sealed enclosure for your CompVT

subwoofer, you must use the included clearance plate. The clearance plate allows the CompVT

subwoofer to sit recessed within the back panel of the subwoofer box to minimize the enclosure’s

depth. The clearance plate must seal tightly. First, use a plunging router, straight-cut bit, and a circle jig

to create a 1/16” (2mm) deep recess with an outer diameter of 6 1/2” (16.7cm) and an inner diameter

of approximately 5” (12.7cm). Center the recess behind the subwoofer on the back panel. Then, cut a

5 1/4” (13.3cm) diameter hole in the center of the recess all the way through the back panel. Using the

clearance plate as a reference, drill the six screw holes with a #29 (0.136”, 3.5mm) drill bit. Next,

countersink each screw hole using a 1/4” (6mm) drill or countersinking bit so the clearance plate will fit

tightly against the back panel. Remove the paper backing from the foam gasket and adhere it to the

inside of the clearance plate. Then, fasten the clearance plate to the box with six #8 screws.

5 1/4” (13.3cm)

cut out

d mia eter

6 1/ ” (16.2 7cm)

recess ter ou

d mia eter

C clearan e Plate

1/16” (2mm)

recess

Drill wit h #29 (0.136”,

3.5mm) bit, then

cou k ntersin with 1/4”

(6mm) b x hoit, si les

e s a equ y all p c d. Use

c c learan e plate as

te latemp .

F u ig re 2

Model:

CVT8

CVT10

CVT12

Sealed Maximum VolumeSQ (Enclosure )

1.8 ft3(51L) Power Handling = 200W RMS

3 ft3(85L) Power Handling = 300W RMS

4.6 ft

3(130L) Power Handling = 300W RMS

Sealed Minimum VolumeCompact (Enclosure )

.4 ft3(11.3L) Power Handling = 200W RMS

.8 ft3(22.7L) Power Handling = 400W RMS

1 ft 3(28.3L) Power Handling = 400W RMS

Model:

CVT8

CVT10

CVT12

Panel B, in (cm)

13.5 x 24.5 (34.3x62.2)

18 x 30.5 (45.7x77.5)

18 x 36 (45.7x91.4)

Panel A, in (cm)

2.5 x 12 (6.4x30.5)

3 x 16.5 (7.6x41.9)

3.125 x 16.5 (7.9x41.9)

Volume, ft

3(L)

.4 (11.3)

.8 (22.7)

1 (28.3)

Panel C, in (cm)

2.5 x 24.5 (6.4x62.2)

3 x 30.5 (7.6x77.5)

3.125 x 36 (7.9x91.4)

P m o u h uanel Di ensi ns forCompact Enclosures Sealed sing 3/4” (1.9cm) t ick MDF: (See Fig re 3)

4 5

INSTALLATION

COMPVTSUBWOOFER

INSTALLATION

Pro Tip: You are one ZX

Mono-Amplifier and a few

cables away from a slamm’in

system! The Kicker ZX line of

mono-amplifiers make it easy

to upgrade to rock-solid bass

with your existing or stock

source unit. Please ask your

dealer about the Kicker ZX

Amplifier upgrades.

Vented ApplicationsEnclosure

Ported CompVTs? Absolutely...and with a vengeance! These enclosures incorporate massive slot-

loaded (rectangular) ports with ultra low air velocity for ground pounding street bass that will make your

“skin bounce on your bones!”

These boxes are the enclosure of choice for outrageous street bass and high performance SPL

contests. If space is not a problem and you want to get the most from your CompVT, try one of these

ported designs. You will not be disappointed.

The ported Compact design increases bass efficiency and fits in many space-limited applications.

Although it is the smallest recommended ported enclosure, the output from 30 to 80 Hz will be

considerably higher than that of any sealed box. The SPL / Deep Bass ported design has even more

output in this crucial frequency band.

The SPL / Deep Bass is the largest and most efficient enclosure design. The SPL / Deep Bass delivers

the sonic output needed to win SPL contests and it produces bass notes “all the way down to the

cella”. This design turns heads and jump starts your heart.

Box NotesBuilding

Use 3/4” (1.9cm) or thicker MDF (medium density fiberboard) and seal the joints with silicone. Use the

“template” inside your CompVT’s shipping carton to mark the mounting hole, then cut directly on the

line. These designs need internal bracing. Add triangular bracing between each of the larger

unsupported panels. See Figure 4.

All the cubic feet (L) measurements in this manual include the displacement of the woofer. For the

vented enclosures the displacement of the port must be calculated and added to the internal volume of

the final design. Use the outer dimensions of the port and multiply “X x Y x Z”, convert to cubic feet, for

example the CVT12 vented compact design’s external port dimensions are, using 3/4” (1.9cm) MDF:

[ (12.5” + 1.5” total MDF wall thickness) x (2.5” + 1.5” total MDF wall thickness) x 20”] x (1 ft

3/ 1728

in3) = .65 ft3, and add this number to the internal volume of the enclosure, CVT12’s 1.75 ft3+ .65 ft3=

2.4 ft3. See Figure 5. Due to the necessary length of these ports, you may want to fold the port along

the bottom and back walls. It will be impractical to use round ports for these designs.

Do not install a port opening against a solid surface, such as an internal brace, back-panel or trunk wall,

seat or interior panel of your vehicle. The port opening must remain unobstructed. Use the smallest

dimension of the rectangular port as the minimum amount of space between the port opening and any

solid surface to insure unrestricted airflow.

A Note on P CowerHandling apacity

CompVT subwoofers will handle massive amounts of power in any of the recommended enclosures,

minimum or maximum. The smaller enclosures are best for use in limited-space applications.

The larger recommended enclosures will yield slightly more bass at the lowest frequencies.

If you prefer an ultra-smooth bass response, you should loosely fill your CompVT enclosure with

poly-fil stuffing. Ported designs will require covering the end of the port (located inside the box) with grill

cloth, chicken wire, or expanded metal to prevent the poly-fil from exiting the port. The use of poly-fil

will slightly decrease efficiency, but will deepen and extend the low frequency output.

For more advice on box building, refer to your Authorized Kicker Dealer, or click on the tab onSupport

the Kicker homepage, www.kicker.com. Choose the Technical Manuals link and then download or view

the corresponding information. Please E-mail or call Technical Services support@kicker.com

(405) 624-8583 for specific or unanswered questions.

Note: The use of a subsonic filter will significantly increase the power handling.

The power handling specifications in these charts are calculated using a 25Hz, 24dB per octave subsonic filter.

F uig re 5

D = 3 x 3 for 2 CVT1

D 2 2 r 0 = x fo CVT1

D 2 2 r = ” x ” fo CVT8

F uig re 4

CompVT Subwoofer - Covered by one or more of the following patents: U.S. Pat #'s 6,611,604, 6,731,773 D473,216, D456,386,

D449,293, D355,193, Taiwan Pat. #162,154; Other U.S. and foreign patents pending.

F uig re 3 P m oanel di ensi n diagram for

comp d a tc seale enc o ul s re

The disp c mla e ent of t eh port must be a e t t e l e t e cal late ancu d d dd d o h internal vo um of h final design.

Th , e dimensions for X Y, and Z may v y b d oar ase n t e t i h h ckness of t eh m uaterial se rtd to ma e t ek h po .

06062007+07CVT

Model:

CVT8

CVT10

CVT12

Vented Deep Maximum VolumeSPL/Bass (Enclosure )

1.2 ft3(34L) + port displacement

2 x 8” (5.1x20.3cm) port, 19.125” (48.6cm) long

Power Handling = 75W RMS

1.75 ft 3(49.6L) + port displacement

2.5 x 10.5” (6.4x26.7cm) port, 20” (50.8cm) long

Power Handling = 200W RMS

2.25 ft 3(63.7L) + port displacement

3 x 12.5” (7.6x31.8cm) port, 20.5” (52.1cm) long

Power Handling = 300W RMS

Vented Minimum VolumeCompact (Enclosure )

.8 ft3(22.7L) + port displacement

1.5 x 8” (3.8x20.3cm) port, 20.75” (52.7cm) long

Power Handling = 75W RMS

1.25 ft3(35.4L) + port displacement

2 x 10.5” (5.1x26.7cm) port, 20” (50.8cm) long

Power Handling = 200W RMS

1.75 ft3(49.6L) + port displacement

2.5 x 12.5” (6.4x31.8cm) port, 20” (50.8cm) long

Power Handling = 300W RMS

Product specificaties

Merk:	Kicker
Categorie:	Subwoofer
Model:	CompVT CVT10

Heb je hulp nodig?

Als je hulp nodig hebt met Kicker CompVT CVT10 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Subwoofer Kicker

Kicker 50CVX124 Handleiding

12 November 2024

Kicker 50CVX154 Handleiding

12 November 2024

Kicker 51CWQ102 Handleiding

23 September 2024

Kicker 51CWQ122 Handleiding

23 September 2024

Kicker 43C84 Handleiding

23 September 2024

Kicker 51CWQ124 Handleiding

23 September 2024

Kicker CompQ 51CWQ152 Handleiding

11 September 2024

Kicker CompQ 51CWQ154 Handleiding

11 September 2024

Kicker CompVT 43CVT122 Handleiding

27 Juni 2024

Kicker CompVR 43CVR104 Handleiding

27 Juni 2024

Handleiding Subwoofer

Nieuwste handleidingen voor Subwoofer

Deaf Bonce Apocalypse ASA-4000.1 Handleiding

20 November 2024

Deaf Bonce Apocalypse Atom 2000 PRO Handleiding

20 November 2024

JBL PSW-D115 Handleiding

20 November 2024

JBL PSW-D110 Handleiding

20 November 2024

JBL PSW-D112 Handleiding

20 November 2024

JBL Power P1224 Handleiding

20 November 2024

JBL Power P1220D II Handleiding

20 November 2024

JBL Power P1242 Handleiding

20 November 2024

JBL Power P1220 II Handleiding

20 November 2024

JBL Power P1020 II Handleiding

20 November 2024