Kicker 45VL7R122 Handleiding

Kicker Subwoofer 45VL7R122

Lees hieronder de 📖 handleiding in het Nederlandse voor Kicker 45VL7R122 (12 pagina's) in de categorie Subwoofer. Deze handleiding was nuttig voor 4 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/12
DL7R12 | VL7R12
TL7R10 | VL7R10
Manual del Propietario | Español
CAJA DE SUBWOOFER L7R
Benutzerhandbuch | Deutsch
L7R TIEFTÖNER GEHÄUSE
Manuel d’utilisation | Française
CAISSON DE GRAVES L7R
L7R
ENCLOSURES
Owner’s Manual
2018 L7R Enclosure Rev F.indd 1
2018 L7R Enclosure Rev F.indd 1
2018 L7R Enclosure Rev F.indd 1
2018 L7R Enclosure Rev F.indd 1
2018 L7R Enclosure Rev F.indd 1 5/25/2018 1:04:24 PM
5/25/2018 1:04:24 PM
5/25/2018 1:04:24 PM
5/25/2018 1:04:24 PM
5/25/2018 1:04:24 PM
2
L7R SUBWOOFER ENCLOSURE
OWNER’S MANUAL
CHECK THE LOAD
The L7R subwoofer enclosures are internally wired for a 2 ohm load at the speaker-wire connection
terminal. Check to see if your ampli er is optimized to drive this load.
L7R ENCLOSURES
The L7R-series enclosures combine
KICKER’s award-winning line of subwoofers
with computer-modeled and human ne-
tuned enclosures to offer a level of bass
performance never before thought possible
from a commercially available, ready-to-install
subwoofer system. The VL7R12 enclosure
features a 12 inch L7R subwoofer, the
TL7R10 & VL7R10 enclosures feature a
10 inch L7R Subwoofer, and the DL7R12
enclosure features two 12 inch L7R
subwoofers.
Plug your subwoofer speaker wire into
the terminals using the red connector as
positive and the black connector as negative.
Connect the other end of the wire to your
subwoofer amplifi er in accordance with its
owners manual.
Sound Check: Poor bass response? Check the system phasing by reversing the positive and negative
speaker connections on the subwoofer. If the bass improves, then the subwoofer was out of phase in
reference to the rest of the audio system.
Authorized KICKER Dealer:
Purchase Date:
Enclosure Model Number:
Enclosure Serial Number:
DL7R12 / VL7R12 / TL7R10 / VL7R10Models:
Pro Tip: With a KICKER KXA ampli er, a pair of KICKER KSC speakers, and a few KICKER cables, you’re
looking at a full system upgrade that will dominate! KICKER ampli ers and accessories make it easy to
upgrade with your existing or stock source unit. Ask your dealer about KICKER ampli ers and speaker
upgrades to complete your system!
IMPORTANT SAFETY WARNING
Prolonged continuous operation of an amplifi er, speaker, or subwoofer in a distorted, clipped or over-
powered manner can cause your audio system to overheat, possibly catching fi re and resulting in serious
damage to your components and/or vehicle. Amplifi ers require up to 4 inches (10cm) open ventilation.
Subwoofers should be mounted with at least 1 inch (2.5cm) clearance between the front of the speaker and
any surface.
2018 L7R Enclosure Rev F.indd 2
2018 L7R Enclosure Rev F.indd 2
2018 L7R Enclosure Rev F.indd 2
2018 L7R Enclosure Rev F.indd 2
2018 L7R Enclosure Rev F.indd 2 5/25/2018 1:04:32 PM
5/25/2018 1:04:32 PM
5/25/2018 1:04:32 PM
5/25/2018 1:04:32 PM
5/25/2018 1:04:32 PM
3
IMPORTANT SAFETY WARNING
To avoid potential injury or possible death from forward movement of the enclosure during abrupt stops or
accidents, the enclosure must be properly installed and securely fastened to your vehicle. You are solely
responsible for securely fastening the enclosure in your vehicle.
PERFORMANCE
Note: All specifi cations and performance gures are subject to change. Please visit www.kicker.com for the most
current information. To get the best performance from your new KICKER Subwoofer, we recommend using genuine KICKER
Accessories and Wiring. Please allow two weeks of break-in time for the subwoofer to reach optimum performance.
The use of a subsonic fi lter will signifi cantly increase power handling. The power handling specifi cation in this chart is
calculated using a 25Hz, 24dB/octave subsonic fi lter.
Subwoofer grills sold separately
at your local KICKER dealer
Model: DL7R12 VL7R12 TL7R10 VL7R10
Rated Impedance [Ω] 2 2 2 2
Sensitivity [1W, 1m] 95dB 94dB 88dB 88.8dB
Continuous Power Handling [Watts RMS] 1200 600 500 500
Frequency Response [Hz] 25–100 25–100 25–100 25–100
Enclosure Depth 1 [in, cm] 15-1/4, 38.7
8-1/2, 21.7 6-1/2, 16.4 8-1/4, 21
Enclosure Depth 2 [in, cm] 20-3/8, 51.8
14-7/8, 37.8 10, 25.4 13-7/8, 35.1
Enclosure Height [in, cm] 15-7/8, 40.2 15, 38.1 15, 38.1 13, 33
Enclosure Width [in, cm] 33-3/4, 85.7
28, 71.1 21-1/2, 54.6 24, 61
Mount the brackets to the bottom of the
enclosure using the supplied smaller
screws. Securely attach the enclosure to the
vehicle with the supplied larger screws.
2018 L7R Enclosure Rev F.indd 3
2018 L7R Enclosure Rev F.indd 3
2018 L7R Enclosure Rev F.indd 3
2018 L7R Enclosure Rev F.indd 3
2018 L7R Enclosure Rev F.indd 3 5/25/2018 1:04:32 PM
5/25/2018 1:04:32 PM
5/25/2018 1:04:32 PM
5/25/2018 1:04:32 PM
5/25/2018 1:04:32 PM


Product specificaties

Merk: Kicker
Categorie: Subwoofer
Model: 45VL7R122

Heb je hulp nodig?

Als je hulp nodig hebt met Kicker 45VL7R122 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Subwoofer Kicker

Handleiding Subwoofer

Nieuwste handleidingen voor Subwoofer