Keurig K-Elite Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Keurig K-Elite (7 pagina's) in de categorie Koffiezetapparaat. Deze handleiding was nuttig voor 26 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/7
Get the most from your
new Keurig® brewer
Use & Care Guide
Remove pcking tpe from
brewer nd plug into  grounded
outlet.
Plce  lrge mug (12oz
minimum) on the drip try.
Remove the water reservoir lid, then lift
the reservoir straight up to remove it.
If you have a Keurig® Water Filter,
install it now. Refer to your Water Filter
Starter Kit for instructions.
Rinse reservoir with fresh water and
fill to the MAX fill line.
Replace water reservoir, making sure
the lock tab engages with the brewer.
Replace lid.
NOTE: Do not use distilled water.
Press power button — the green power
light will illuminate.
The brewer will automatically begin
heating the water. This will take about 3
minutes. Once the heating sound stops,
the brewer is ready.
Do not insert a K-Cup® pod. Press the
HOT WATER button. The five brew
buttons will blink. Press the small mug
(8oz) button to start a cleansing brew.
Pour the hot water into the sink.
The one-time setup process is now
complete and you are ready to brew!
NOTE:
Between brew cycles, the brewer may take about a
minute to reheat.
1
3
5
2
4
6
Before You Brew
Brew Your First Cup
Select your brew size for bolder
coffee, press the STRONG button before
selecting your brew size. The brew size and
STRONG button, if selected, will remain
illuminated while brewing about 1
minute.
For iced beverages, fill a 16oz plastic
tumbler with ice. Insert any K-Cup® pod,
then press the ICED button.
The brewer will be ready to brew another cup in about a minute.
NOTE: For iced beverages, only use a plastic cup. Do not use glass.
CAUTION: While brewing, there is extremely hot water in the K-Cup® pod holder. To avoid
injury, do not lift the handle during the brewing process.
Place a mug on the drip tray. If using a travel
mug, remove the drip tray and place the
mug on the drip tray base. Lift the handle
and place a K-Cup® pod in the K-Cup® pod
holder. Lower the handle completely to close
the lid.
Do not remove the foil lid on the K-Cup® pod.
High Altitude Brewing: While holding the
brewer handle up, push down slowly on the
K-Cup® pod in the pod holder until the bottom of the K-Cup®
pod is punctured by the exit needle.
ICED
ADD WATER DESCALE
PM
HOT
WATER
STRONG
ICED
ADD WATER DESCALE
PM
HOT
WATER
STRONG
MAX.
ICED
ADD WATER DESCALE
PM
HOT
WATER
STRONG
Plug & Place Rinse & Fill
Power On Cleansing Brew
Place Mug & Pod Brew & Enjoy!
Travel Mug
12oz
Lar gge Mu
10oz
Sm ll a Cup
6oz
Sm ll Mua g
8oz
Extra Sm ll a Cup
4oz
ICED
ADD WA TE R DESCAL E
PM
HOT
WATER
STRONG
HOT
WATER
Sm ll a
Mug
8oz
ICED
ADD WATER DESCALE
PM
HOT
WATER
STRONG
ICED
STRONG
Brewer Features
Programming Brewer Features
Strong Brew increases the strength and bold taste of your
coffees flavor. For bolder coffee, press the button and STRONG
select your brew size.
Iced Coffee: Brew hot over ice and enjoy cold. Makes full-
flavored and delicious iced coffee
.
Hot Water on demand for instant soups and oatmeal.
Smart Start heats then brews in one simple process. No need to
wait for the brewer to heat before selecting brew size. Power on
your brewer, add coffee, then select your brew size. The brewer
will heat, then automatically begin brewing.
Clock allows you to set an Auto On time.
Temperature Control allows you to adjust the temperature
from 18 19.
Auto On sets your brewer to turn on at a specific time.
Auto Off automatically turns your brewer off 2 hours after the
last brew for energy savings. You can also program your brewer
to shut off in 15 minute increments after your last brew, or
remain on all the time.
High Altitude ensures your brewer works properly at higher
altitudes (5,000 feet).
NOTE: In High Altitude mode the temperature is not adjustable. If you attempt to adjust
the temperature, the mountain icon will flash indicating that you are in high altitude mode.
To program your K-Elite® brewer, use the settings button and
up and down arrows . After the feature is programmed, press
the settings button until you return to the home clock screen.
Clock: Press the settings button once and use the up and down
arrows to select the correct hour. Press the settings button
again and use the up and down arrows to select the correct
minutes.
Temperature Control: Press the settings button 3 times and use
the up and down arrows to select your preferred temperature.
Auto On: Press the settings button until a sun icon appears.
Then use the up and down arrows to turn the Auto On
functionality on. Press the settings button again to set your
preferred time, using the up and down arrows. Once you return
to the home clock screen a sun icon will be present to let you
know that the functionality is on.
NOTE: You must set the clock to enable to Auto On functionality.
Auto Off: Press the settings button and use the up and down
arrows to set your preferred off time. Off time can be set
from 15 minutes to 2 hours in 15 minute increments. A moon
icon will appear on the screen to indicate your brewer is in
Auto Off mode.
To disable Auto Off, use the up and down arrows to turn the
functionality “off.” The moon icon will no longer appear on
the screen.
To enable Auto Off, use the up and down arrows to turn the
functionality “on.” The moon icon will appear on the screen.
High Altitude: Press the settings button until you see the
mountain icon displayed on your screen. Use the arrows to
turn this setting on or off.
NOTE: In high altitude mode the temperature is not adjustable. If you attempt to adjust the
temperature, the mountain icon will flash indicating you are in high altitude mode.


Product specificaties

Merk: Keurig
Categorie: Koffiezetapparaat
Model: K-Elite

Heb je hulp nodig?

Als je hulp nodig hebt met Keurig K-Elite stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Koffiezetapparaat Keurig

Handleiding Koffiezetapparaat

Nieuwste handleidingen voor Koffiezetapparaat