Kern TGD 50-3C Handleiding

Kern Weegschaal TGD 50-3C

Lees hieronder de 📖 handleiding in het Nederlandse voor Kern TGD 50-3C (3 pagina's) in de categorie Weegschaal. Deze handleiding was nuttig voor 24 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/3
KERN & Sohn GmbH
Ziegelei 1
D-72336 Balingen
E- -Mail: info@kern sohn.com
Tel.: +49- - -0 [0]7433 9933
Fax: 9933 149 - -+49 [0]7433 -
internet: - www.kern sohn.com
Operating manual
Electronic Carat Pocket Scales
KERN TGD
Version 1.0
2018-06
GB
TGD-BA-e- 1810
TGD- -e- 2BA 1810
GB
KERN TGD
Version 1.0 2018-06
Operating manual
Electronic Carat Pocket Scales
1. Technical data
KERN D - TG 50 3C
TTGD - -A 50 3C
Readability (d) 0.001 g / 0.005 ct
Weighing range (max) 50 g / 250 ct
50 g (F2)
Operating temperature + 10° C .... + 30° C
Humidity of air max 80% air humidity (non -condensing)
Automatic cut after 300 seconds-off
Batteries 4 x 1.5 V AAA (Running time rating 150 hrs)
2. Scope of delivery
•
Pocket scale
•
Weighing pan
•
Power cable
•
Balance cover •
Batteries (4 x 1.5 V AAA) •
Operating manual
3. Keyboard overview
ON/OFF
Switch on/off
MODE Switch- over weighing unit
TARE Taring / Setting to zero
PCS Parts counting
4. Operation
Weighing:
 Place the balance on a firm, level surface. Level balance with foot
screws until the air bubble of the water balance is in the prescribed
circle. Check levelling regularly
 To switch on, press ON/OFF button, the balance completes a self check. As soon as the weight
display appears, the balance is ready for weighing. If required, set to zero by using TARE button.
 Place load on pan and read the weighing result.
 Use the MODE button to switch over into the available weighing settings.
Taring:
 Place the empty weighing container.
 Press the TARE button, the zero display disappears.
 Weigh the material, the net weight will be indicated.
 When the balance is unloaded the saved taring value is displayed with negative sign.
 To delete the stored tare value, remove load from weighing pan and press the TARE button.
3 D- -e- TG BA 1810
Parts counting:
 In weighing mode press PCS button, the balance changes into the counting mode.
 Place the reference
 Keep the PCS been button pressed, the currently set reference quantity is displayed.
 Use the button to set the quantity of the placed reference (selectable 25, 50, 75, 100) and MODE
acknowledge with PCS button.
 Remove reference.
 If necessary, tare the empty balance container.
 Place counted pieces on pan and read the quantity of pieces.
 Use MODE button to return to the weighing mode.
5. Adjustment
 Arrange adjustment weight (see chap. 1).
Info about adjustment weights can be found on the Internet at: http://www.kern-sohn.com
 Ensure that there are no objects on the weighing pan.
 In weighing mode keep the button pressed until MODE <CAL> appears.
 Press the button again and wait until the weight value of the required adjustment weight MODE
will appear flashing.
 Place adjustment weight. Wait until >, followed by the weight value of the placed <PASS
adjustment weight will be displayed. After that the adjustment will be finished successfully.
 In case of a diverging display the adjustment has failed. Repeat adjustment process.
6. Important Notes
• Do not overload balance.
• The occurrence of electromagnetic fields may result in major display deviations. Then change
location.
• Avoid high air humidity, vapours and dust.
• Do not bring the balance directly in contact with liquids.
• Do not leave permanent load on the weighing pan.
• Never operate balance in explosive environment. The serial version is not explosion protected.
• Check the balance regularly with external test weights.
• Warranty claims will be voided when the housing is opened.
7. Error messages
Capacity of batteries exhausted, change batteries
Adjustment required, see chap. 5
The placed weight exceeds the capacity of the balance. Reduce load.
Place the balance on a firm, level surface and level it.
8. Declaration of conformity
The current EC/EU Conformity declaration can be found online in:
www.kern-sohn.com/ce

Product specificaties

Merk: Kern
Categorie: Weegschaal
Model: TGD 50-3C

Heb je hulp nodig?

Als je hulp nodig hebt met Kern TGD 50-3C stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Weegschaal Kern

Kern

Kern MGC 100K-1 Handleiding

16 November 2024
Kern

Kern MGE 100K-1S05 Handleiding

2 November 2024
Kern

Kern PNS 12000-1 Handleiding

2 November 2024
Kern

Kern EG 200-3AM Handleiding

2 November 2024
Kern

Kern PNJ 600-3M Handleiding

2 November 2024
Kern

Kern MGD 100K-1S05 Handleiding

2 November 2024
Kern

Kern MSW 200 Handleiding

2 November 2024
Kern

Kern MPC 300K-1LM Handleiding

2 November 2024
Kern

Kern MPE 250K100PNM Handleiding

2 November 2024
Kern

Kern TMPE 250K-1PEM-A Handleiding

2 November 2024

Handleiding Weegschaal

Nieuwste handleidingen voor Weegschaal

Medel

Medel Diagnostic XXL Handleiding

18 November 2024
PCE Instruments

PCE Instruments PCE-CS 1T Handleiding

17 November 2024
Cardinal Detecto

Cardinal Detecto Sonaris Handleiding

17 November 2024
Sencor

Sencor SBS 2507WH Handleiding

16 November 2024
Soehnle

Soehnle Style Sense Multi 300 Handleiding

16 November 2024
Ecomed

Ecomed PS-72E Handleiding

16 November 2024
Adler

Adler AD 8169 Handleiding

15 November 2024
Ade

Ade Nina BM 707 Handleiding

14 November 2024
Perel

Perel VTBAL405 Handleiding

14 November 2024
Ade

Ade Ines BA2300-2 Handleiding

14 November 2024