Kenwood TM-D710A Handleiding
Kenwood
Radio communicatie
TM-D710A
Lees hieronder de š handleiding in het Nederlandse voor Kenwood TM-D710A (52 pagina's) in de categorie Radio communicatie. Deze handleiding was nuttig voor 29 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/52
INSTRUCTION MANUAL
144/440 MHz FM DUAL BANDER
Ā© B62-1986-30 (K, E, M4)
09 08 07 06 05 04 03
Only basic operations are explained in this
instruction manual. For a detailed explanation on the
operations, refer to the PDF file supplied on the CD-
ROM.
TM-D710A
144/430 MHz FM DUAL BANDER
TM-D710A/ TM-D710E
NOTIFICATION
This equipment complies with the essential requirements of
Directive 1999/5/EC.
The use of the warning symbol means the equipment is subject
to restrictions of use in certain countries.
This equipment requires a licence and is intended for use in the
countries as below.
AT BE DK FI FR DE GR IS
IE IT LI LU NL NO PT ES
SE CH GB CY CZ EE HU LV
LT MT PL SK SI BG RO ISO3166
THANK YOU
We are grateful you decided to purchase this FM transceiver. Kenwood
Kenwood always provides Amateur Radio products which surprise and excite
serious hobbyists. This transceiver is no exception. believes that this Kenwood
product will satisfy your requirements for both voice and data communications.
FEATURES
This transceiver has the following main features:
ā¢ Has a built-in TNC which conforms to the AX.25 protocol. With a portable computer,
allows you to enjoy Packet operation quite easily.
ā¢ Includes a program for dealing with data formats supported by Automatic Packet/
Position Reporting System (APRSĀ®).
ā¢ Enhanced Programmable Memory (PM) channels store virtually entire current operating
environments for your quick recall.
ā¢ Contains a total of 1000 Memory channels to program frequencies and other various
data. Allows each Memory channel to be named using up to 8 alphanumeric
characters.
ā¢ Continuous Tone Coded Squelch System (CTCSS) or Digital Code Squelch (DCS)
rejects unwanted calls from other stations.
WRITING CONVENTIONS FOLLOWED IN THIS MANUAL
The writing conventions described below have been followed to simplify
instructions and avoid unnecessary repetition.
Instruction Action
Press [KEY]. Momentarily press KEY.
Press [KEY] (1s). Press and hold KEY for 1 second or longer.
Press [KEY1], [KEY2]. Press KEY1 momentarily, release KEY1, then press
KEY2.
Press [F], [KEY]. Press the F key to enter Function mode, then press
KEY to access its secondary function.
Press [KEY] + Power ON. With the transceiver power OFF, press and hold
KEY while turning the transceiver power ON.
Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable
for EU countries that have adopted separate waste collection systems)
Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed
as household waste.
Old electrical and electronic equipment and batteries should be recycled at a facility
capable of handling these items and their waste byproducts. Contact your local
authority for details in locating a recycle facility nearest to you. Proper recycling and
waste disposal will help conserve resources whilst preventing detrimental eļ¬ects on
our health and the environment.
i
NOTICES TO THE USER
One or more of the following statements may be applicable:
FCC WARNING
This equipment generates or uses radio frequency energy. Changes or modiļ¬cations to this
equipment may cause harmful interference unless the modiļ¬cations are expressly approved in the
instruction manual. The user could lose the authority to operate this equipment if an unauthorized
change or modiļ¬cation is made.
INFORMATION TO THE DIGITAL DEVICE USER REQUIRED BY THE FCC
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses and can generate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that the interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment oļ¬ and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
ā¢ Reorient or relocate the receiving antenna.
ā¢ Increase the separation between the equipment and receiver.
ā¢ Connect the equipment to an outlet on a circuit diļ¬erent from that to which the receiver is
connected.
ā¢ Consult the dealer for technical assistance.
WHEN CONDENSATION OCCURS INSIDE THE TRANSCEIVER
Condensation may occur inside the transceiver in such a case where the room is warmed using a
heater on cold days or where the transceiver is quickly moved from a cold room to a warm room.
When condensation occurs, the microcomputer and/or the transmit/receive circuits may become
unstable, resulting in transceiver malfunction. If this happens, turn OFF the transceiver and just
wait for a while. When the condensation droplets disappear, the transceiver will function normally.
EXPLOSIVE ATMOSPHERES (GASES, DUST, FUMES, etc.)
Turn OFF your transceiver while taking on fuel or while parked in gasoline service stations. Do
not carry spare fuel containers in the trunk of your vehicle if your transceiver is mounted in the
trunk area.
INJURY FROM RADIO FREQUENCY TRANSMISSIONS
Do not operate your transceiver when somebody is either standing near to or touching the
antenna, to avoid the possibility of radio frequency burns or related physical injury.
DYNAMITE BLASTING CAPS
Operating the transceiver within 150 m (500 feet) of dynamite blasting caps may cause them
to explode. Turn OFF your transceiver when in an area where blasting is in progress, or where
āTURN OFF TWO-WAY RADIOā signs have been posted. If you are transporting blasting caps
in your vehicle, make sure they are carried in a closed metal box with a padded interior. Do not
transmit while the caps are being placed into or removed from the container.
Product specificaties
| Merk: | Kenwood |
| Categorie: | Radio communicatie |
| Model: | TM-D710A |
Heb je hulp nodig?
Als je hulp nodig hebt met Kenwood TM-D710A stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Radio communicatie Kenwood
16 April 2022
23 April 2022
2 Mei 2022
2 Mei 2022
30 April 2022
23 April 2022
15 Augustus 2022
7 Mei 2022
16 Augustus 2022
3 Mei 2022
Handleiding Radio communicatie
- Radio communicatie Motorola
- Radio communicatie Albrecht
- Radio communicatie Baofeng
- Radio communicatie Furuno
- Radio communicatie GTV
- Radio communicatie Icom
- Radio communicatie Intek
- Radio communicatie Multi Care Systems
- Radio communicatie President
- Radio communicatie Rexon
- Radio communicatie Simrad
- Radio communicatie Spektrum
- Radio communicatie Stabo
- Radio communicatie Swissphone
- Radio communicatie Team
- Radio communicatie Vertex Standard
- Radio communicatie Wintec
- Radio communicatie Wouxun
Nieuwste handleidingen voor Radio communicatie
3 September 2023
3 September 2023
2 September 2023
26 Augustus 2023
26 Augustus 2023
31 Januari 2023
31 Januari 2023
14 Juli 2023
31 Januari 2023
13 Mei 2023